4NM DD002-SCZ

4NM 39.4" Small Desk with Wood Drawers Instruction Manual

Model: DD002-SCZ

giriiş

Satın aldığınız için teşekkür ederizasing the 4NM 39.4" Small Desk with Wood Drawers. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read these instructions carefully before assembly and retain them for future reference.

Güvenlik Bilgileri

Yaralanmayı veya ürüne zarar gelmesini önlemek için lütfen aşağıdaki güvenlik talimatlarına uyun:

  • Montajı her zaman verilen talimatlara göre yapın.
  • Masanın sağlam ve düz bir yüzeye yerleştirildiğinden emin olun.
  • Masanın taşıma kapasitesini aşacak veya devrilmesine neden olabilecek ağır nesneleri masanın üzerine koymayın.
  • Montaj sırasında boğulma tehlikesini önlemek için küçük parçaları çocuklardan uzak tutun.
  • Tüm bağlantı elemanlarının sıkılığını düzenli olarak kontrol edin.

Paket İçeriği

Montaj işlemine başlamadan önce, aşağıda listelenen tüm bileşenlerin mevcut ve hasarsız olduğundan emin olun. Herhangi bir parça eksik veya hasarlıysa, lütfen müşteri hizmetleriyle iletişime geçin.

  • Masaüstü Paneli
  • Masa Ayakları (4)
  • Çekmece Panelleri (2 çekmece için)
  • Drawer Slides (4 sets)
  • Çekmece Kulpları (2)
  • Çapraz Çubuk/Destek Kirişi
  • Montaj Donanımı (vidalar, dübeller, kilitler vb.)
  • Montaj Aleti (örneğin, Allen anahtarı)
  • Kullanım Kılavuzu

Montaj Talimatları

Assembly typically takes 30-40 minutes. It is recommended to have two people for easier assembly. Lay out all parts on a soft, clean surface to prevent scratches.

  1. Step 1: Attach Legs to Desk Top
    Carefully place the desk top panel upside down on a protected surface. Attach the four desk legs to the designated corners of the desk top using the provided screws and fasteners. Ensure they are securely tightened.
  2. Adım 2: Çapraz Çubuğu Kurun
    Connect the crossbar/support beam between the back legs using the appropriate hardware. This provides additional stability.
  3. 3. Adım: Çekmeceleri Monte Edin
    Assemble the two drawers by connecting the side, front, and back panels. Insert the drawer bottom panel into the grooves. Secure with fasteners.
  4. Step 4: Attach Drawer Slides
    Attach the drawer slides to the assembled drawers and the corresponding runners inside the desk frame. Ensure smooth operation.
  5. Adım 5: Çekmece Kulplarını Takın
    Attach the handles to the front panels of the drawers using the provided screws.
  6. Step 6: Final Placement
    Carefully turn the desk upright and place it in its desired location. Ensure it is stable and level.
Desk with dimensions

Image: Diagram showing the desk with its dimensions (39.4" L x 18.9" W x 30" H) and drawer internal measurements.

Kullanım Talimatları

The 4NM Small Desk is designed for use as a home office computer desk, study writing table, or vanity desk.

  • Çekmece Kullanımı: The two wood drawers provide storage for office supplies, documents, or personal items. Open and close drawers gently to ensure longevity of the slides.
  • Ağırlık Kapasitesi: Distribute weight evenly across the desk surface. Avoid placing excessively heavy items on the desk or in the drawers to prevent damage or instability.
  • Yüzey Koruması: While the desk surface is scratch-resistant and waterproof, using coasters for drinks and protective mats for hot items is recommended to maintain its finish.
Black desk with computer setup

Image: The 4NM desk in a home office setting with a computer monitor, keyboard, mouse, and small plant.

Bakım

  • Temizlik: Masanın yüzeyini yumuşak bir bezle silin.amp bez. Kaplamaya zarar verebilecek aşındırıcı temizleyicilerden veya sert kimyasallardan kaçının.
  • Dökülmeler: Clean up spills immediately to prevent water damage, despite the waterproof properties.
  • Bağlantı Elemanları: Tüm vidaları ve bağlantı elemanlarını periyodik olarak kontrol ederek sıkı olduklarından emin olun. Gerekirse, sağlamlığı korumak için tekrar sıkın.
  • Çekmece Rayları: Çekmeceler sıkışırsa, çekmece raylarına az miktarda silikon bazlı yağlayıcı uygulayın.

Sorun giderme

SorunOlası NedenÇözüm
Masa sallanıyor.Gevşek bağlantı elemanları; düzensiz zeminTighten all screws. Adjust leg levelers if present, or place shims under legs on uneven surfaces.
Çekmeceler sıkışıyor veya düzgün kaymıyor.Drawer slides misaligned; debris in slides; overloaded drawerCheck alignment of drawer slides. Clean slides of any debris. Reduce weight in the drawer. Apply silicone lubricant to slides.
Montaj sırasında eksik parçalarPaketleme hatasıReview package contents list. Contact 4NM customer support with the specific part number.

Özellikler

ÖzellikDetay
Marka4NM
Model NumarasıDD002-SCZ
Ürün Boyutları39.4" G x 18.9" D x 30" Y (100 cm G x 48 cm D x 76 cm Y)
RenkSiyah
MalzemeEngineered Wood (P2 particle wood board)
Bitiş TürüBoyalı Siyah
Özel Özellikler2 Wood Drawers, Scratch-resistant, Waterproof
Ürün Ağırlığı44 Pound
Montaj GerekliEvet

Garanti ve Destek

For warranty information or customer support, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.

For assistance with assembly, missing parts, or any other inquiries, please visit the 4NM store on Amazon or contact their customer service.

Visit the 4NM Store on Amazon

İlgili Belgeler - DD002-SCZ

Önview Aquasure Serene Salt-Free Lite Water Conditioning System Owner's Manual
This owner's manual provides comprehensive installation, operation, and maintenance guidance for the Aquasure Serene Salt-Free Lite Water Conditioning System, ensuring optimal performance and clean, pure water.
Önview Aquasure Serene Series Salt-Free Water Conditioning System: Installation and Owner's Manual
Comprehensive guide for installing, operating, and maintaining the Aquasure Serene Series Salt-Free Water Conditioning System. Includes inspection, setup, maintenance, and warranty information.
Önview Aquasure Serene Salt-Free Water Conditioning System Owner's Manual and Installation Guide
Comprehensive guide for installing, operating, and maintaining the Aquasure Serene Series Salt-Free Water Conditioning System. Includes system components, operation parameters, installation steps, maintenance procedures, warranty information, and contact details.
Önview Agiltron 1310nm/1550nm Fiber Bağlantılı FP Lazer Kaynağı Veri Sayfası
4 nm hat genişliğine sahip, 0.2-4 mW'a kadar tek modlu çalışma sunan Agiltron'un 1310 nm/1550 nm Fiber Bağlantılı FP Lazer Kaynağı'nın veri sayfası. Tıbbi ve biyoteknoloji gibi çeşitli uygulamalar için tezgah üstü veya modül paketleri halinde mevcuttur.
Önview PXN VD4 Bundle Racing Simulator User Manual
Comprehensive user manual for the PXN VD4 Bundle direct drive racing simulator. Covers safety, installation, setup, PC software configuration, and product specifications for an immersive PC racing experience.
Önview KERN EW/EG-N Precision Balances: Operating Instructions and Technical Data
Comprehensive operating instructions for the KERN EW/EG-N series of precision balances, covering installation, operation, technical specifications, and troubleshooting. Includes details for models like EW 120-4NM and various EG/EW types.