giriiş
Satın aldığınız için teşekkür ederizasing the Mytrix M16 Leverless Arcade Controller. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read it thoroughly to ensure optimal performance and longevity of your controller.
Paket İçeriği
Aşağıda listelenen tüm öğelerin paketinizde bulunduğunu doğrulayın:
- Mytrix M16 Leverless Arcade Controller
- USB-C Kablosu
- Tuş Çektirmesi
- Kullanıcı Kılavuzu
- Extra Low Profile Red Switches (x2)
- Extra Keycaps (x2)
Image: Contents of the Mytrix M16 package, including the controller, USB-C cable, keycap puller, manual, two extra switches, and two extra keycaps.
Kurulum ve Uyumluluk
The Mytrix M16 controller offers wide compatibility across various platforms. Ensure your device is updated to the latest firmware for best performance.
Sistem Gereksinimleri
- Bilgisayar: Windows 10 and above, Steam Deck, Raspberry Pi, MiSTer, Linux
- Konsollar: PS3, PS4, Nintendo Switch
- Mobile/Other: Android, iPadOS, MacOS
- Not: For PlayStation 5 and Xbox consoles, an additional adapter is required (not included).
Image: Visual representation of the Mytrix M16 controller's compatibility with various platforms including PS5, PS4, PS3, PC, Switch, Steam, Arcade, and Xbox (with adapter).
İlk Bağlantı
- Connect the provided USB-C cable to the controller's USB-C port.
- Connect the other end of the USB-C cable to your desired gaming platform (PC, console, etc.).
- The controller should be automatically recognized by most compatible systems.
Kullanım Talimatları
The Mytrix M16 features a GP-2040-CE chip for ultra-low latency and various control modes.
Kontrol Modları
The controller supports multiple input modes:
- X-giriş modu
- Anahtar modu
- PS3/D-input mode
- PS4 modu
- Klavye modu
Button Layout and Key Values
Refer to the diagram and table below for the standard button layout and corresponding key values across different modes.
Image: Diagram showing the button layout of the Mytrix M16 controller and a table detailing key values for XInput, Switch, PS4/PS3, DInput, Arcade, and RP2040 modes.
Özel Fonksiyonlar
- Turbo Fonksiyonu: Activates rapid fire for selected buttons. Consult the web configuration for specific setup.
- SOCD Cleaning Modes: Supports various Simultaneous Opposite Cardinal Direction cleaning modes to prevent conflicting directional inputs. Configurable via web arayüz.
- M1/M2 Custom Buttons: Two customizable buttons for advanced control.
RGB Aydınlatma
The controller features customizable RGB lighting with 4 preset modes.
Image: The Mytrix M16 controller displaying various RGB backlight colors, illustrating the 4 preset modes.
Custom RGB Lighting Controls
Adjust RGB lighting using the following button combinations:
- SELECT + START + X: Next Animation
- SELECT + START + Y: Previous Animation
- SELECT + START + A: Parlaklık Yukarı
- SELECT + START + B: Parlaklık Aşağı
- SELECT + START + RB: LED Parameter Up
- SELECT + START + RT: LED Parameter Down
- SELECT + START + LB: Pressed Parameter Up
- SELECT + START + LT: Pressed Parameter Down
Image: A visual guide to customizing RGB lighting on the Mytrix M16 controller, showing various color options and control combinations.
Bakım ve Özelleştirme
The Mytrix M16 is designed for easy maintenance and extensive customization.
Sıcak Değiştirilebilir Anahtarlar
The controller uses Gateron Low Profile Red Switches, which are hot-swappable. This allows you to replace switches without soldering.
- Anahtar Türü: Gateron Low Profile Kırmızı Anahtarlar
- Ömür: 50 Milyon
- Tahrik Gücü: Yaklaşık 45 gr
- Seyahat Mesafesi: 3.2mm
- Hareket Noktası: 1.5mm
Resim: Yakın çekim view of the Gateron Low Profile Red Switches on the Mytrix M16 controller, highlighting their hot-swappable nature.
Detachable 7-Layer Design
The controller features a 7-layer detachable board design, enabling customization of the keyboard's graphics and internal components.
Resim: Patlamış view of the Mytrix M16 controller, showing its 7-layer detachable design for customization, including ABS keycaps, acrylic sheets, switches, and PCB board.
DIY Screen & Artwork Support
Personalize your controller with custom artwork and screen displays.
Resim: Eskiamples of custom artwork and screen displays on the Mytrix M16 controller, demonstrating DIY customization possibilities.
Genel Temizlik
To clean your controller, use a soft, dry cloth. Avoid abrasive cleaners or solvents. For deeper cleaning, the detachable layers allow access to internal components.
Sorun giderme
This section addresses common issues you might encounter with your Mytrix M16 controller.
Bağlantı Sorunları
- Controller not detected: Ensure the USB-C cable is securely connected to both the controller and the device. Try a different USB port or cable.
- No data flow: If the controller powers on but is not recognized by any system (Windows, PopOS, consoles), attempt to access the web yapılandırıcı.
Web Configuration Access
The Mytrix M16 features a built-in embedded web configuration interface for advanced settings and firmware updates.
- Tutun BAŞLANGIÇ button while plugging the device into your computer.
- The controller should enter a special mode, often displaying an IP address on its small screen.
- Bir tane aç web browser on your computer and navigate to the displayed IP address.
- If the browser times out or no device is connected, ensure your computer's network settings allow connection to local devices.
Double Inputs or Unresponsive Buttons
- Double inputs: This can sometimes be caused by outdated firmware. Access the web configurator to check for and install the latest firmware updates.
- Tepkisiz düğmeler: The controller supports hot-swappable switches. If a specific button is unresponsive, try replacing its switch with one of the included spares using the keycap puller.
Firmware güncellemeleri
Firmware updates are crucial for optimal performance and resolving potential issues. The Mytrix M16 uses an open-source GP2040-CE firmware.
- Güncellemeden önce: It is highly recommended to back up your current settings and take screenshots of all web configurator pages. Firmware updates can sometimes reset settings or change interface elements.
- Post-update issues: If LEDs or the screen are deactivated after an update, you may need to re-enable them through the web configurator, as default firmware settings might disable these features.
- Refer to the official GP2040-CE documentation for detailed instructions on firmware updates and configuration.
Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | M16 |
| Boyutlar (U x G x Y) | 27 cm x 20 cm x 1 cm (10.63" x 7.87" x 0.39") |
| Ağırlık | 1.92 pound (yaklaşık 0.87 kg) |
| Yonga seti | GP-2040-CE (40nm process technology) |
| Gecikme | 1ms kadar düşük |
| Anahtarlar | Gateron Low Profile Red Switches (Hot-swappable) |
| RGB Aydınlatma | 4 preset modes, customizable colors |
| Özelleştirme | 7-layer detachable design, DIY artwork support |
| Kontrol Modları | X-input, Switch, PS3/D-input, PS4, Keyboard |
| Özel Özellikler | Turbo function, SOCD cleaning, M1/M2 custom buttons, embedded web yapılandırma |
Image: Diagram illustrating the physical dimensions of the Mytrix M16 controller: 27 cm (10.63") length, 20 cm (7.87") width, and 1 cm (0.39") thickness.
Garanti ve Destek
Mytrix is committed to providing quality products and customer satisfaction. For technical support, warranty claims, or any inquiries, please contact Mytrix customer service.
- Müşteri Hizmetleri: Refer to the Mytrix official webİletişim bilgileri için lütfen sitenizi veya satın alma platformunuzu kullanın.
- Garanti: Specific warranty terms may vary by region and retailer. Please retain your proof of purchase for warranty services.
