Globo Lighting BOSTON Outdoor Pedestal Light

1. Giriş

Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.

2. Güvenlik Talimatları

• Elektriksel Güvenlik: Montaj, tüm yerel ve ulusal elektrik yönetmeliklerine uygun olarak yetkili bir elektrikçi tarafından yapılmalıdır. Montaj, bakım veya ampul değiştirme işlemlerinden önce daima ana devre kesiciden elektriği kesin.
• Açık Hava Kullanımı: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
• Ampul Tipi: Use only E27 bulbs with the specified wattage. Maksimum suyu aşmayıntage fikstürde belirtilmiştir.
• İşleme: Cihazı dikkatli kullanın. Düşürmekten veya şiddetli darbelere maruz bırakmaktan kaçının.
• Temizlik: Do not use abrasive cleaners or solvents. Clean with a soft, damp Kumaş.
• Sıcaklık: Ampulü değiştirmeden önce tamamen soğumasını bekleyin.

3. Paket İçeriği

Kurulum işlemine başlamadan önce lütfen tüm parçaların eksiksiz ve hasarsız olduğundan emin olun:

• 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
• 1x Montaj Tabanı
• 1x Set of Mounting Hardware (screws, anchors)
• 1x Kullanım Kılavuzu

Note: E27 bulb is not typically included and must be purchased separately.

4. Özellikler

5. Kurulum ve Kurulum

Önemli: Ensure the main power supply is switched off at the circuit breaker before commencing installation.

1. Konum seç: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
2. Kablolamayı Hazırlayın: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
3. Tabanı Monte Edin: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
4. Elektrik Kablolarını Bağlayın: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
5. Ampulü takın: Insert a suitable E27 bulb (not included) into the lamp tutucu. Aşırı sıkmayın.
6. Güvenli Fikstür: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
7. Gücü Geri Yükle: Kurulum tamamlandıktan ve tüm bağlantılar güvenli bir şekilde yapıldıktan sonra, ana devre kesiciden elektriği tekrar açın.

Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.

6. Kullanım Talimatları

The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.

• Güç Açık: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
• Hareket Sensörü: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
• Otomatik Kapanma: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
• Gündüz/Gece Sensörü: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.

Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.

Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.

7. Bakım

• Temizlik: Armatürü düzenli olarak yumuşak bir bezle temizleyin.amp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
• Ampul Değişimi:
  1. Ensure the power supply to the fixture is turned off at the circuit breaker.
  2. Eski ampule dokunmadan önce tamamen soğumasını bekleyin.
  3. Carefully unscrew the top cover or access panel to reach the E27 bulb.
  4. Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
  5. Securely reattach the cover or access panel, ensuring a watertight seal.
  6. Gücü geri yükleyin.
• Denetleme: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.

8. Sorun Giderme

If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.

9. Garanti ve Destek

This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.

İletişim bilgileri genellikle ürün ambalajında ​​veya üreticinin resmi web sitesinde bulunabilir. webalan.