HZXVOGEN HVM140 3-in-1 Multi-Process Welder User Manual

1. Önemli Güvenlik Talimatları

Always read and understand all safety warnings and instructions before operating this welding machine. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

• Elektrik Çarpması Öldürebilir: Canlı elektrik parçalarına dokunmayın. Kuru kaynak eldivenleri ve koruyucu giysiler giyin. Kendinizi çalışma alanından ve topraktan yalıtın.
• Dumanlar ve Gazlar Tehlikeli Olabilir: Başınızı dumanlardan uzak tutun. Solunum bölgesinden dumanları uzaklaştırmak için havalandırma veya egzoz sistemi kullanın.
• Ark ışınları gözleri ve cildi yakabilir: Wear a welding helmet with a proper shade of filter to protect your face and eyes when welding or watching. Wear appropriate protective clothing to protect your skin.
• Yangın ve Patlama Tehlikesi: Protect yourself and others from flying sparks and hot metal. Remove all flammables within 35 feet (10 meters) of the welding area.
• Sıcak parçalar ciddi yanıklara neden olabilir: Kaynak yapılan malzemeye dokunmadan önce soğuması için süre tanıyın.
• Aşırı Akım, Aşırı Gerilimtage, Overheating Protection: The machine is equipped with built-in protection. If activated, allow the machine to cool down before resuming operation.

For detailed safety information, refer to relevant industry standards and local regulations.

2. Paket İçeriği

Carefully unpack the welding machine and check for any damage. Ensure all items listed below are present:

Figure 2.1: HVM140 Welder and Included Accessories

This image displays the HZXVOGEN HVM140 welding machine along with its complete set of accessories, including the MIG torch, electrode holder, earth clamp, flux core wire, brush hammer, and welding rods.

• HZXVOGEN HVM140 Welding Machine (1 unit)
• MIG Torch (1 unit)
• Electrode Holder (1 unit)
• toprak Clamp (1 birim)
• Flux Core Wire (0.8mm or 1.0mm, 1 spool)
• Brush Hammer (1 unit)
• Welding Rods (5 pieces)
• Kullanım Kılavuzu (1 kopya)

3. Ürün Bittiview

The HZXVOGEN HVM140 is a versatile 3-in-1 multi-process inverter welding machine designed for various welding applications. It supports Gasless MIG, MMA (Stick), and Lift TIG welding modes.

3.1 Temel Özellikler

Figure 3.1: 3-in-1 Multi-Process Capabilities

This image highlights the HVM140's ability to perform Gasless MIG, MMA (Stick), and Lift TIG welding, showcasing its versatility for different welding tasks.

• 3'si 1 Arada Çok İşlemli: Supports Gasless MIG, MMA (Stick), and Lift TIG welding modes.
• IGBT İnverter Teknolojisi: Provides stable arc, high efficiency, and energy saving.
• Digital Rotating Screen: Intuitive one-button control for easy and quick adjustment of welding parameters.
• VRD (Cilttage Azaltma Cihazı): Enhances safety, especially in MMA mode, by reducing open-circuit voltage.
• Sıcak Başlangıç: Improves arc ignition in MMA mode, preventing electrode sticking.
• Yapışmaz: Automatically reduces current if the electrode sticks, making it easier to remove.
• Ark Kuvveti: Provides additional current during short arc length, preventing the arc from extinguishing.
• Efficient Cooling Fan: Reduces internal dust accumulation and prolongs machine lifespan.
• Taşınabilir ve Kompakt: Lightweight design (approx. 3.7 kg) with a convenient handle for easy transport.

Figure 3.2: Digital Control Interface

This image shows the digital display and single knob control of the HVM140, allowing for precise and easy adjustment of welding parameters.

Figure 3.3: Professional Welder Features

This image visually represents the advanced features of the HVM140, including IGBT technology, VRD, Hot Start, efficient cooling, Anti-Stick, and Arc Force, contributing to professional welding performance.

4. Kurulum

4.1 İlk Muayene

Before connecting the machine, inspect all cables, connections, and the machine casing for any signs of damage. Ensure the work area is clean, dry, and well-ventilated, free from flammable materials.

4.2 Güç Bağlantısı

• Makinenin güç anahtarının "KAPALI" konumunda olduğundan emin olun.
• Connect the power cord to a suitable power outlet. The HVM140 supports a range of input voltages (refer to specifications for details).

4.3 Gasless MIG Setup

1. Tel besleme ünitesinin kapağını açın.
2. Install the flux core wire spool onto the spindle. Ensure the wire unwinds smoothly.
3. Thread the wire through the wire feeder mechanism and into the MIG torch liner.
4. Close the wire feeder cover.
5. Connect the MIG torch to the designated MIG output terminal on the front panel.
6. Topraklama kablosunu bağlayınamp to the work piece. Ensure a good electrical connection.
7. Turn on the machine. Press and hold the wire feed button (usually on the front panel or torch trigger) for approximately 5 seconds to feed the wire through the torch until it exits the contact tip.

Figure 4.1: Wire Feeding Mechanism

This diagram illustrates the internal wire feeding system of the HVM140, detailing how to install the flux core wire spool and feed the wire into the MIG torch for operation.

4.4 MMA (Stick) Setup

1. Connect the electrode holder cable to the positive (+) terminal on the front panel.
2. Topraklama kablosunu bağlayınamp Kabloyu ön paneldeki negatif (-) terminale bağlayın.
3. Securely insert the welding electrode into the electrode holder.
4. Topraklama kablosunu bağlayınamp iş parçasına.

4.5 Lift TIG Setup

1. Connect the TIG torch (not included) to the negative (-) terminal on the front panel.
2. Topraklama kablosunu bağlayınamp cable to the positive (+) terminal on the front panel.
3. Ensure a suitable tungsten electrode is installed in the TIG torch.
4. Topraklama kablosunu bağlayınamp iş parçasına.
5. Note: This machine supports Lift TIG, which means arc initiation is done by touching the tungsten to the workpiece and lifting it slightly. No high-frequency start.

5. Kullanım Talimatları

5.1 Mod Seçimi

Turn on the machine. Use the mode selection button (usually near the digital display) to cycle through MIG, MMA, and Lift TIG modes. The selected mode will be indicated on the digital screen.

5.2 Akım Ayarlaması

Once the desired mode is selected, use the single control knob to adjust the welding current (Amperage). The digital display will show the current setting. Refer to welding charts for recommended current settings based on material thickness and welding process.

5.3 Kaynak Teknikleri

Proper welding technique is crucial for quality welds. Practice on scrap material before welding critical components.

• MIG Kaynak: Maintain a consistent stick-out and travel speed. Use a slight push or pull angle depending on the application.
• MMA Kaynak: Maintain a short arc length. Use a slight weaving motion for wider beads.
• Lift TIG Kaynağı: Touch the tungsten to the workpiece to initiate the arc, then quickly lift it a small distance (1-3mm) to establish the arc. Maintain a consistent arc length and travel speed.

5.4 Görev Döngüsü

The HVM140 has a 60% duty cycle at its maximum output. This means it can operate continuously for 6 minutes out of every 10-minute period at maximum current before requiring a 4-minute cooling period. Exceeding the duty cycle can damage the machine. The machine's built-in thermal protection will activate if it overheats.

Figure 5.1: Duty Cycle Explanation

This graphic explains the 60% duty cycle of the HVM140, indicating that for every 10 minutes of operation at maximum output, the machine can work for 6 minutes and requires a 4-minute break to cool down.

6. Bakım

Düzenli bakım, kaynak makinenizin uzun ömürlü olmasını ve optimum performans göstermesini sağlar.

• Temizlik: Regularly clean the machine's exterior with a dry cloth. Use compressed air to blow out dust from the cooling vents. Ensure the machine is unplugged before cleaning.
• Kablo Denetimi: Periodically inspect all cables (power, MIG torch, electrode holder, earth clamp) for cuts, abrasions, or loose connections. Replace damaged cables immediately.
• MIG Kaynak Kaynak Torunun Bakımı: Clean the contact tip and gas nozzle regularly. Replace worn contact tips and diffusers.
• Tel Besleyici: Keep the wire feeder rollers clean and free of debris. Ensure proper tension on the wire spool.
• Depolamak: Makineyi kullanılmadığı zamanlarda temiz, kuru ve tozsuz bir ortamda saklayın.

7. Sorun Giderme

Bu bölümde karşılaşabileceğiniz yaygın sorunlara çözümler sunulmaktadır. Burada listelenmeyen sorunlar için müşteri desteğiyle iletişime geçin.

8. Özellikler

Technical specifications for the HZXVOGEN HVM140 welding machine:

Figure 8.1: Portable and Compact Design

This image provides a visual representation of the HVM140's compact dimensions and lightweight design, emphasizing its portability for various work environments.

9. Garanti ve Destek

HZXVOGEN is committed to providing high-quality products and excellent customer service.

• Garanti: This product comes with a 3-Year Extended Warranty. Please retain your proof of purchase for warranty claims.
• Müşteri Desteği: For any questions, technical assistance, or warranty inquiries, please contact HZXVOGEN customer support. Our team is available 24/7 to assist you.
• İletişim Bilgileri: Refer to the contact details provided on the product packaging or the official HZXVOGEN webalan.

Şekil 9.1: Garanti ve Destek Bilgileri

This image confirms the product's certifications (DEELAY, UL), the availability of a 3-Year Extended Warranty, and 24/7 customer support, ensuring reliability and assistance.