ProMaster Traveler Flex Şarj Cihazı Kullanım Kılavuzu

giriiş

The ProMaster Traveler Flex Lithium-Ion Battery Charger is designed for convenience and portability, offering a compact and lightweight solution for charging compatible Canon camera batteries. This manual provides essential information for the safe and efficient use of your charger, including setup, operation, maintenance, and troubleshooting.

Its multi-voltage circuitry allows for worldwide use, making it an ideal travel companion. The charger features an LED indicator to display charging status and a booster switch for reactivating fully depleted batteries.

Ürün Özellikleri

• Çok Yönlü Uyumluluk: Charges a variety of compatible Canon battery types.
• Hızlı Şarj: Most batteries charge in two hours or less.
• Booster Switch: Helps reactivate fully depleted 7.2V/7.4V batteries.
• LED Göstergesi: A colored LED light displays the current charging status (red for charging, green for complete).
• Küresel Uyumluluk: çok ciltlitage circuitry (120-240V) enables worldwide use with the included AC adapter (an outlet adapter may be required for some countries).
• Kompakt Tasarım: Lightweight and easy to transport, suitable for travel.

Paket İçeriği

Lütfen paketinizde tüm öğelerin mevcut olduğundan emin olun:

• ProMaster Traveler Flex Battery Charger Unit
• AC Güç Adaptörü
• Kullanım Kılavuzu (bu belge)

Güvenlik Bilgileri

WARNING: RISK OF ELECTRIC SHOCK. DRY LOCATION USE ONLY.

• Şarj cihazını kullanmadan önce tüm talimatları okuyun.
• Şarj cihazını yağmura veya neme maruz bırakmayın.
• Do not operate the charger if it has received a sharp blow, been dropped, or damaged in any way.
• Do not disassemble the charger. Incorrect reassembly may result in electric shock or fire.
• Şarj cihazını çocuklardan uzak tutun.
• Use only the provided AC power adapter.
• Şarj sırasında uygun havalandırmayı sağlayın. Şarj cihazının üzerini örtmeyin.
• Kullanmadığınız zaman şarj cihazını elektrik prizinden çıkarın.

Kurmak

1. Güç Adaptörünü Bağlayın: Plug the small end of the AC power adapter cable into the DC input port on the side of the ProMaster Traveler Flex charger.
2. Duvar Prizine Bağlayın: Plug the AC power adapter into a suitable wall outlet. The charger is designed for 120-240V input. If traveling internationally, an appropriate outlet adapter (not included) may be required.
3. Pili Hazırlayın: Ensure your compatible Canon battery is clean and free of debris on its contacts.

Image: The ProMaster Traveler Flex charger connected to its AC power adapter, ready for use. The adapter plugs into the side of the charger unit.

Kullanım Talimatları

Bir Pilin Şarj Edilmesi

1. Pili takın: Carefully align your compatible Canon battery with the charging contacts in the charger slot. Gently push the battery into place until it is securely seated. The charger is designed to hold the battery securely when placed flat on a surface.
2. Monitör LED Göstergesi:
   • Kırmızı LED: Pil şu anda şarj ediliyor olduğunu gösterir.
   • Yeşil LED: Indicates that charging is complete, or the charger is powered on without a battery inserted.
3. Pili çıkarın: Once the LED turns green, the battery is fully charged. Carefully remove the battery from the charger.

Resim: Üst view of the ProMaster Traveler Flex charger showing the battery slot and charging contacts. A battery would be inserted here for charging.

Image: The ProMaster Traveler Flex charger with a compatible battery securely inserted into the charging slot, ready to begin charging.

Using the Booster Switch

The booster switch is designed to reactivate fully depleted 7.2V/7.4V lithium-ion batteries that may not be recognized by standard chargers. If a depleted battery does not begin charging (LED remains green after insertion), follow these steps:

1. Ensure the depleted 7.2V/7.4V battery is correctly inserted into the charger.
2. Locate the small "Booster Switch" button, typically near the charging slot or LED indicator.
3. Press and hold the Booster Switch for a few seconds. The LED should turn red, indicating that the battery is now charging.
4. Release the switch. The charging process should continue normally.
5. If the LED does not turn red, the battery may be faulty or incompatible.

Bakım

• Temizlik: Temizlemeden önce şarj cihazını elektrik prizinden çıkarın. Şarj cihazının dış yüzeyini yumuşak, kuru bir bezle silin. Sıvı temizleyiciler veya çözücüler kullanmayın.
• Depolamak: Şarj cihazını doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak, serin ve kuru bir yerde saklayın.
• Pil Temas Noktaları: Periodically check the charging contacts on both the charger and your batteries for any dirt or corrosion. Clean gently with a dry cotton swab if necessary.

Sorun giderme

Özellikler

Image: The bottom of the ProMaster Traveler Flex charger, displaying printed specifications including input/output voltage and current, and safety warnings.

Garanti ve Destek

ProMaster products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official ProMaster website. For technical support or service inquiries, please contact ProMaster customer service through their official channels.

Daha fazla bilgi ve destek kaynağına ulaşmak için şu adresi ziyaret edebilirsiniz: Amazon'daki ProMaster Mağazası.