OMTech Galvo 50W Fiber Lazer Gravür ve Kesici Kullanım Kılavuzu

1. Giriş

This manual provides essential information for the safe and efficient operation of your OMTech Galvo 50W Fiber Laser Engraver Cutter. This all-metal body fiber laser engraver is designed for precision marking and cutting on various materials, offering high accuracy and speed.

Key features include a 0.01 mm spot diameter, a 5.9''x5.9'' workbed, and a maximum engraving speed of up to 10,000 mm/s. The laser is classified as Class 2 with an output power of 0.874 mW.

Figure 1: OMTech Galvo 50W Fiber Laser Engraver Cutter unit.

2. Güvenlik Bilgileri

Always prioritize safety when operating the laser engraver. Failure to follow safety guidelines can result in serious injury or damage to the equipment.

• Göz Koruması: Gözlerinizi lazer ışınlarından korumak için daima uygun lazer güvenlik gözlükleri takın.
• Havalandırma: Ensure adequate ventilation in the work area to remove fumes and particles generated during engraving or cutting.
• Malzeme Uyumluluğu: Only engrave or cut materials approved for fiber lasers. Avoid materials that produce toxic fumes or are highly flammable.
• Acil durdurma: Acil durdurma butonunun yerini ve çalışma şeklini öğrenin.
• Nezaret: Çalışma sırasında makineyi asla gözetimsiz bırakmayın.

3. Kurulum

3.1 Initial Placement and Connections

Place the laser engraver on a stable, level surface. Connect the power cable and ensure all necessary peripheral connections are secure.

3.2 Yazılım Kurulumu ve Uyumluluğu

The OMTech Galvo 50W is compatible with LightBurn software and comes pre-loaded with EZCad. Install the required software on your computer (Windows 7, 8, 10, 11, or macOS) to control the laser engraving operations.

Figure 2: The laser engraver is compatible with LightBurn and EZCad on multiple operating systems.

3.3 Focusing with Red Dot Pointer

The engraver is equipped with a red dot indicator to assist in adjusting the laser focus. To activate or deactivate the red dot guider, press the dedicated focus button.

Figure 3: Red dot pointer for precise focus adjustment.

3.4 Rotary Axis Connection

For engraving on curved surfaces such as rings and bracelets, the unit includes a rotary axis connection port. Connect a compatible rotary axis accessory to this port as per the accessory's instructions.

Figure 4: The laser engraver supports a rotary axis for cylindrical objects.

4. Kullanım Talimatları

4.1 Gravür ve Kesme İşlemi

1. Prepare your design in LightBurn or EZCad software.
2. Place the material on the workbed. For curved items, use the rotary axis.
3. Use the red dot pointer to adjust the focus for optimal results.
4. Set the appropriate laser parameters (power, speed, frequency) for your material.
5. Yazılım üzerinden gravür veya kesme işlemini başlatın.
6. Monitor the process and ensure proper ventilation.

4.2 High Accuracy and Speed

The laser engraver offers high accuracy at 0.01 mm, allowing for detailed engravings. Its maximum engraving speed of 10,000 mm/s significantly boosts productivity.

Şekil 5: Ör.ample of high-accuracy engraving.

Figure 6: Speed comparison highlighting the fiber laser's performance.

4.3 Malzeme Uyumluluğu

The OMTech Galvo 50W Fiber Laser Engraver Cutter is suitable for marking and etching a wide range of materials, including but not limited to:

• Metaller: Brass, Aluminum, Silver, Tungsten, Titanium, Gold, Stainless Steel, Cast Aluminum, Copper.
• Non-Metals: Brick, Granite, Tile, Marble, Stone, Acrylic, Leather, Paper, Plastic, Wood, Glass.

Figure 7: Various materials suitable for engraving with the OMTech 50W Fiber Laser.

5. Bakım

Düzenli bakım, lazer gravür makinenizin uzun ömürlü olmasını ve optimum performans göstermesini sağlar.

• Lens Temizliği: Lazer ışın kalitesini korumak için lazer merceğini periyodik olarak özel bir mercek temizleme solüsyonu ve bezle temizleyin.
• Çalışma Tezgahı Temizliği: Keep the workbed clean from debris and residue to prevent interference with engraving and ensure proper material placement.
• Bağlantı Kontrolleri: Regularly inspect all cables and connections for any signs of wear or looseness.
• Havalandırma Sistemi: Ensure the ventilation system is clear and functioning effectively to extract smoke and particles.

6. Sorun Giderme

Bu bölümde karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.

6.1 Laser Not Engaging

If the red laser pointer is active but the fiber laser does not engage, check the internal connections. A common issue can be a loose flat control cable from the mainboard to the fiber laser source. If accessible and you are comfortable, carefully open the case and ensure this cable is securely plugged in. If the issue persists or you are unsure, contact customer support.

6.2 Software Connection Issues

If the software (LightBurn or EZCad) fails to connect to the engraver, ensure:

• The engraver is powered on.
• The USB cable is securely connected to both the engraver and the computer.
• The correct drivers are installed on your computer.
• No other software is attempting to communicate with the engraver simultaneously.

7. Özellikler

Şekil 8: Üzeriview temel ürün özelliklerinin.

8. Garanti ve Destek

OMTech provides comprehensive customer service and support for its products.

• Garanti: A 2-year support period is provided for this product.
• Müşteri Hizmetleri: A 24-hour service team is available in the US, Philippines, and China.
• Teknik Destek: Professional pre-sales and after-sales service, technical support, and on-site experience (by appointment) are offered.

İletişim Bilgileri:

Telefon: +1 (949) 438-4949

E-posta Desteği: SUPPORT@OMTECHLASER.COM

Teknik Destek E-postası: TECHSUPPORT@OMTLASER.COM

9. Ürün Videoları

No relevant product videos created by the seller were found in the provided data for the OMTech Galvo 50W Fiber Laser Engraver Cutter. The available videos pertain to a different product (WIFI Backup Camera) and have therefore not been embedded.