1. Giriş ve Güvenlik Bilgileri
This manual provides essential instructions for the safe and effective operation, setup, and maintenance of your Einhell TC-SB 245 L Bandsaw. Read all instructions carefully before use to prevent injury and ensure proper function.
Genel Güvenlik Uyarıları
- Güvenlik gözlüğü, işitme koruması ve toz maskesi gibi uygun kişisel koruyucu ekipmanı (KKE) her zaman kullanın.
- Çalışma alanının temiz, iyi aydınlatılmış ve engellerden arındırılmış olduğundan emin olun.
- Çocukları ve çevredeki kişileri çalışan makineden uzak tutun.
- Herhangi bir ayar yapmadan, aksesuar değiştirmeden veya bakım işlemi gerçekleştirmeden önce güç kaynağının bağlantısını kesin.
- Never operate the bandsaw with guards removed or damaged.
- Use the provided push bar for feeding small workpieces to maintain a safe distance from the blade.
- Ensure the safety switches on the machine's access doors are functioning correctly. The machine will not start if these doors are not securely closed.
2. Ürün Bittiview
The Einhell TC-SB 245 L Bandsaw is designed for precise cutting of various materials, primarily wood. It features a robust induction motor and a stable design for consistent performance.
Resim 2.1: Üzeriview of the Einhell TC-SB 245 L Bandsaw, showcasing its red and black housing, saw table, and blade assembly.
Temel Özellikler
- Large, Stable Desk: The aluminum work table provides a generous working surface with a 245 mm gap width, suitable for medium-sized workpieces.
- Entegre LED Işık: Illuminates the work area for improved visibility during operation.
- Infinitely Adjustable Tilting Saw Table: Allows for precise miter cuts.
- Adjustable Angled Fence: Ensures flexibility and accuracy for various cutting angles.
- Alet gerektirmeyen testere bıçağı değişimi: Simplifies blade replacement.
- Durable Induction Motor: Provides strong pulling force, operates smoothly, and requires minimal maintenance.
- Safety Push Bar: Included for safe material handling.
Resim 2.2: Ayrıntılı view of the saw table, blade, and adjustable fence, highlighting the precision components.
3. Kurulum
3.1 Paketin Açılması ve Montaj
- Tüm bileşenleri dikkatlice ambalajından çıkarın.
- Inspect all parts for damage. Do not use the machine if any parts are damaged.
- Assemble the stand (if applicable) and securely mount the bandsaw. Ensure the machine is stable on a level surface.
3.2 Saw Blade Installation/Change
The Einhell TC-SB 245 L features a tool-free saw blade change mechanism.
Resim 3.1: Örn.ample of bandsaw blades, illustrating the type of blade used with this machine.
- Gücü kesin: Always unplug the machine before changing the blade.
- Open access doors: Unlock and open the upper and lower access doors to expose the blade wheels.
- Release blade tension: Use the tension knob (usually located at the top) to loosen the blade.
- Remove old blade: Carefully remove the old blade from the wheels and blade guides.
- Yeni bıçağı takın: Place the new blade onto the wheels, ensuring the teeth are pointing downwards towards the table. Guide the blade through the upper and lower blade guides.
- Tension blade: Adjust the tension knob until the blade is properly tensioned. Refer to the markings or a tension gauge if available.
- Adjust blade tracking: Rotate the upper wheel by hand to check blade tracking. Adjust the tracking knob (if present) until the blade runs centrally on the wheels.
- Close access doors: Securely close both access doors. The machine will not operate if these doors are not fully closed due to integrated safety switches.
3.3 Adjusting the Saw Table and Fence
Image 3.2: Illustration of the saw table tilting mechanism, indicating its adjustable range for miter cuts.
- Tilting Saw Table: Loosen the locking knob beneath the table to adjust the tilt angle. Use the angle scale for precise settings. Tighten the knob firmly once the desired angle is set.
- Angled Fence: The fence can be adjusted along the table for parallel cuts. Loosen its locking mechanism, slide it to the desired position, and secure it. The fence can also be angled for specific cuts.
Resim 3.3: Yakın çekim view of the adjustable angled fence, showing its positioning and locking mechanism.
4. Operasyon
4.1 Başlatma ve Durdurma
- Ensure all safety guards are in place and access doors are closed.
- Connect the machine to a suitable power outlet.
- Press the green 'ON' button to start the bandsaw.
- Press the red 'OFF' button to stop the bandsaw.
4.2 Kesme İşlemleri
Image 4.1: A user demonstrating the proper technique for cutting a wooden workpiece on the bandsaw.
- İş Parçasını Hazırlayın: Mark your cut line clearly on the material.
- Adjust Blade Guides: Position the upper blade guide assembly so it is approximately 3-6 mm (1/8-1/4 inch) above the workpiece.
- Makineyi Başlat: Turn on the bandsaw and allow the blade to reach full speed before beginning the cut.
- Besleme Malzemesi: Gently feed the workpiece into the blade, following your marked line. Use the push bar for smaller pieces or when hands are close to the blade. Maintain a steady, even pressure.
- LED Işığı Kullanın: The integrated LED light can be switched on to improve visibility of the cutting line.
Image 4.2: The integrated LED light providing illumination to the cutting area for enhanced precision.
5. Bakım
Düzenli bakım, şerit testerenizin uzun ömürlü ve güvenli çalışmasını sağlar.
5.1 Temizlik
- Gücü kesin: Temizlemeden önce daima makinenin fişini çekin.
- Toz Emme: The bandsaw is equipped with a dust extraction port. Connect a suitable dust extractor or shop vacuum to this port during operation to minimize sawdust accumulation.
Image 5.1: Demonstrating the connection of a vacuum hose to the bandsaw's dust extraction port for efficient chip removal.
- Genel Temizlik: Use a brush or compressed air to remove sawdust and debris from the table, blade guides, and motor vents. Do not use solvents that could damage plastic parts.
5.2 Bıçak Muayenesi ve Değişimi
- Regularly inspect the blade for sharpness, cracks, or missing teeth. A dull or damaged blade can lead to poor cuts and increased risk of kickback.
- Bölüm 3.2'deki talimatları izleyerek aşınmış veya hasar görmüş bıçakları derhal değiştirin.
6. Sorun Giderme
Bu bölümde, şerit testerenizle karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Makine başlamıyor | Power cord not plugged in; Safety access doors not closed; Faulty power switch. | Check power connection; Ensure all access doors are securely closed; Contact service if switch is faulty. |
| Bıçak sapıyor veya yanlış kesiyor. | Dull blade; Incorrect blade tension; Improperly adjusted blade guides; Incorrect blade tracking. | Replace blade; Adjust blade tension; Adjust blade guides; Adjust blade tracking. |
| Aşırı titreşim veya gürültü | Loose components; Damaged blade; Unbalanced wheels. | Check all fasteners; Replace damaged blade; Contact service for wheel balancing. |
Burada listelenmeyen sorunlarla karşılaşırsanız veya çözümler sorunu gidermezse, Einhell müşteri desteğiyle iletişime geçin.
7. Özellikler
Technical data for the Einhell TC-SB 245 L Bandsaw (Model 4308036).
| Özellik | Detay |
|---|---|
| Model Numarası | 4308036 |
| Üretici | Einhell |
| Ürün Ağırlığı | 24.6 Kilogram |
| Ürün Boyutları | 53.5x42x83.5 cm |
| Güç Kaynağı | Kablolu Elektrik |
| Sap Malzemesi | Alüminyum |
| Bıçak Malzemesi | Carbon Steel (Kohlenstoffstahl) |
| Özel Özellikler | Brushless (Bürstenlos) |
| Dahil Bileşenler | Çıplak Aracı |
8. Garanti ve Destek
Garanti bilgileri için lütfen ürününüzle birlikte verilen garanti kartına bakın veya resmi Einhell web sitesini ziyaret edin. webSite. Satın alma belgeniz olarak satın alma fişinizi saklayın.
For technical support, spare parts, or service inquiries, please contact Einhell customer service directly. Contact details can typically be found on the Einhell websitenizde veya ürün dokümanlarınızda.
