1. Giriş
This manual provides essential instructions for the safe and effective operation of your GOOLOO GT4000S Jump Starter and GOOLOO GT150 Tire Inflator. Please read this manual thoroughly before use and retain it for future reference.
Image: The GOOLOO GT4000S Jump Starter (yellow and black unit with clamps) and the GOOLOO GT150 Tire Inflator (black rectangular unit with digital display).
2. Önemli Güvenlik Bilgileri
Yaralanmayı veya cihaza ve araca gelebilecek zararı önlemek için her zaman aşağıdaki güvenlik önlemlerine uyun:
- Kullanmadan önce tüm talimatları okuyunuz.
- Do not operate the jump starter if the cables or clampler zarar görür.
- Ensure correct polarity connection (red to positive, black to negative) to avoid sparks or damage.
- Do not jump start vehicles with battery voltage 12V dışında.
- Çocukların erişemeyeceği yerde saklayınız.
- Do not expose to rain or extreme temperatures.
- Do not use the tire inflator for purposes other than inflating tires or compatible items.
- Avoid over-inflating tires; always check recommended PSI.
3. Ürün Bittiview
3.1 GOOLOO GT4000S Jump Starter
- Güncel Tepe: 4000A
- Motor Uyumluluğu: 12.0 litreye kadar benzinli, 10.0 litreye kadar dizel
- Şarj: 100W Fast-Charging (1.2 hours for full charge, 5 minutes for a single jumpstart). Type-C port for charging.
- Çıktı: Up to 100W for charging MacBooks and other laptops (Type-C port only).
- Pil Ömrü: Up to 60 jumpstarts on a single full charge.
- Uyumluluk: Suitable for RVs, pickup trucks, motorcycles, SUVs, tractors, boats, and other 12V vehicles.
Image: The GOOLOO GT4000S Jump Starter connected to a car battery in an engine bay, illustrating its primary function.
3.2 GOOLOO GT150 Tire Inflator
- Maksimum Basınç: 150 PSI
- Enflasyon Hızı: Inflates a completely flat 205/55 R16 car tire (0-36PSI) in approximately 7 minutes.
- Özellikler: Auto-shutoff, cordless design, portable size, ultra-bright LED screen for clear display.
- Uyumluluk: Suitable for car tires, SUV tires, motorcycle tires, bicycle tires, balls, kayaks, and swim rings.
Image: The GOOLOO GT150 Tire Inflator connected to a car tire, demonstrating its inflation capability.
4. Kurulum ve Şarj
4.1 Charging the GT4000S Jump Starter
- Connect the provided USB-C cable to the jump starter's Type-C input port.
- Connect the other end of the USB-C cable to a 100W fast-charging wall adapter (not included, unless specified in package contents) or a compatible car charger.
- The display will show the charging wattage ve pil yüzdesitage. A full charge from 0% to 100% typically takes 1.2 hours with a 100W charger.
Image: The GOOLOO GT4000S Jump Starter being charged via its USB-C port inside a vehicle, highlighting its fast-charging capability.
4.2 Charging the GT150 Tire Inflator
The GT150 Tire Inflator is charged via its USB-C port. Connect it to a compatible USB-C charger. The LED screen will indicate the charging status.
Image: The GOOLOO GT150 Tire Inflator connected to a smartphone via a USB cable, demonstrating its power bank functionality.
5. Kullanım Talimatları
5.1 Using the GT4000S Jump Starter
- Ensure the jump starter is sufficiently charged (above 20%).
- Atlama kablosunu cl bağlayınamps to the jump starter unit.
- kırmızı cl'yi takınamp araç aküsünün pozitif (+) terminaline ve siyah cl'yeamp negatif (-) terminale.
- Turn on the jump starter. The screen should display "READY" if the connection is correct and the battery is detectable.
- If the battery is completely dead or too low to detect, press the "BOOST" button for 1-2 seconds until "READY" is displayed. This forces the jump starter to provide maximum output.
- Aracınızın motorunu 30 saniye içerisinde çalıştırın.
- Araç çalıştırıldıktan hemen sonra kelepçeyi çıkarın.ampAraç aküsünden ayırın, ardından bunları takviye marşından ayırın.
Video: Official GOOLOO demonstration on how to jump start a car using a GOOLOO jump starter. This video illustrates the connection process and starting the vehicle.
5.2 Using the GT150 Tire Inflator
- Connect the air hose to the GT150 inflator and then securely attach it to the tire valve stem.
- Turn on the GT150. The LED screen will display the current tire pressure.
- Use the '+' and '-' buttons to set the desired target pressure.
- Press the power button to start inflation. The inflator will automatically stop once the target pressure is reached.
- Disconnect the air hose and store the unit.
Image: The GOOLOO GT150 Tire Inflator's LED screen showing both the real-time and preset tire pressure values, indicating its auto-shutoff feature.
6. Bakım ve Saklama
- Store the units in a cool, dry place away from direct sunlight and moisture.
- Recharge the jump starter every 3-6 months to maintain battery health, even if not used.
- Clean the units with a dry, soft cloth. Do not use harsh chemicals.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Jump Starter not turning on | Low battery or faulty unit | Charge the unit fully. If issue persists, contact support. |
| "READY" not displayed (GT4000S) | Incorrect connection or battery too low | cl'yi kontrol etamp connections. Use "BOOST" function for completely dead batteries. |
| Tire Inflator not working (GT150) | Low battery, hose not connected properly | Charge the unit. Ensure hose is securely attached to tire valve. |
8. Özellikler
GOOLOO GT4000S Hızlı Başlangıç
- Doruğa ulaşmak Ampöfke: 4000A
- Cilttage: 12V
- Pil Tipi: Lityum iyon
- Şarj Girişi: USB-C (100W Max)
- USB Çıkışı: USB-C (100W Max), USB-A (various outputs)
GOOLOO GT150 Tire Inflator
- Maksimum Basınç: 150 PSI
- Güç Kaynağı: Cordless (Internal Battery)
- Görüntülemek: Ultra Bright LED Screen
9. Garanti ve Destek
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official GOOLOO website. Please have your model numbers (GT4000S, GT150) ready when contacting support.