Ürün Bittiview
The WALI GSMU001XL is a heavy-duty single monitor gas spring desk mount designed to support ultrawide or curved LCD/LED screens ranging from 17 inches to 49 inches. It can hold monitors weighing up to 44 lbs and is compatible with VESA mounting patterns of 75x75mm and 100x100mm. This mount offers full adjustability for optimal viewing angles and includes integrated USB Type-C and USB Type-A 3.0 ports for convenient connectivity.
The mount features a two-stage locking system, supporting both C-clamp and Grommet Base installations on desks with a thickness between 0.47 inches and 1.97 inches.
Paket İçeriği
Before beginning installation, please ensure all components are present and undamaged. If any parts are missing or damaged, contact WALI customer support.
- 1 x WALI Ultrawide Monitor Desk Mount (GSMU001XL)
- Mounting Hardware Kit (screws, washers, spacers, Allen wrenches)
- Kullanıcı Kılavuzu
Kurulum ve Yükleme
Follow these steps carefully to install your WALI GSMU001XL monitor mount. Two installation methods are available: C-clamp and Grommet Base.
Adım 1: Montaj Yöntemini Seçin
C-cl kullanılıp kullanılmayacağına karar verin.amp or Grommet Base. Both methods are compatible with desk thicknesses from 0.47 inches to 1.97 inches.
Step 2: Assemble the Base and Arm
Assemble the base according to your chosen mounting method (C-clamp or Grommet Base). Attach the lower arm section to the base.
3. Adım: VESA Plakasını Monitöre Takın
VESA plakasını, donanım kitinde bulunan uygun vidaları kullanarak monitörünüzün arkasına takın. Vidaların iyice sıkıldığından emin olun, ancak aşırı sıkmayın.
Adım 4: Monitörü Kola Monte Edin
Carefully slide the monitor (with the attached VESA plate) onto the upper arm section. Ensure it locks into place. It is recommended to have assistance when mounting heavier monitors.
Step 5: Connect USB Cables
Connect the integrated USB Type-C and USB Type-A 3.0 ports on the mount to your computer using the provided cables. Route cables through the arm's cable management channels for a tidy setup.
Monitör Kolunun Çalıştırılması
The WALI GSMU001XL monitor arm offers extensive adjustability to achieve an ergonomic viewpozisyon.
Monitör Pozisyonunun Ayarlanması
The arm allows for the following movements:
- Tilt: Adjust the monitor angle from +50° to -20°.
- Döner: Rotate the monitor horizontally up to +90°/-90°.
- Rotasyon: Rotate the monitor 360° to switch between landscape and portrait modes.
- Yükseklik Ayarı: The gas spring arm allows for a height range of 9.09 inches to 19.69 inches.
- Eklenti: The arm can extend up to 21.93 inches.
Gazlı Yay Gerginlik Ayarı
The gas spring tension must be adjusted to match your monitor's weight for proper balance and movement. Use the provided Allen wrench to adjust the tension screw located on the arm.
- To adjust for lighter monitors or if the monitor floats up: Turn the tension screw saat yönünde.
- To adjust for heavier monitors or if the monitor sags down: Turn the tension screw saat yönünün tersi.
Adjust gradually until the monitor stays in position when released.
Bakım
To ensure the longevity and proper function of your WALI monitor arm, follow these simple maintenance guidelines:
- Temizlik: Kol ve tabanı yumuşak bir bezle silin.amp Bez. Cilaya zarar verebilecek aşındırıcı temizleyicilerden veya çözücülerden kaçının.
- Periyodik Kontroller: Tüm vidaları ve bağlantıları düzenli olarak kontrol ederek sıkı olduklarından emin olun. Gerekirse tekrar sıkın.
- Gazlı Yay: The gas spring is designed for long-term use and typically requires no maintenance. If you notice changes in its performance, refer to the troubleshooting section.
Sorun giderme
Monitör kolunuzla ilgili sorunlarla karşılaşırsanız, aşağıdaki yaygın sorunlar ve çözümlere göz atın:
Problem: Monitor Sags or Drops
Çözüm: The gas spring tension is likely too low for your monitor's weight. Turn the tension screw saat yönünün tersi to increase tension until the monitor holds its position.
Problem: Monitor Floats Up or is Difficult to Push Down
Çözüm: The gas spring tension is likely too high for your monitor's weight. Turn the tension screw saat yönünde to decrease tension until the monitor holds its position.
Problem: Monitor is Unstable or Wobbles
Çözüm:
- Tüm montaj vidalarının (masa üstü vidaları) doğru şekilde takıldığından emin olun.amp(Grommet, VESA plakası, kol bağlantıları) iyice sıkılmıştır.
- Verify that your desk is stable and can support the weight of the mount and monitor.
Problem: USB Ports Not Functioning
Çözüm:
- Ensure the USB cables from the monitor arm are properly connected to your computer's USB ports.
- Test with different USB devices or computer ports to rule out device or port issues.
If problems persist after attempting these solutions, please contact WALI customer support.
Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | GSMU001XL |
| Marka | VALİ |
| Monitör Boyutu Uyumluluğu | 17" to 49" Ultrawide/Curved |
| Ağırlık Kapasitesi | 44 lbs'ye (20 kg) kadar |
| VESA Uyumluluğu | 75x75mm, 100x100mm |
| Masa Kalınlığı Uyumluluğu | 0.47" - 1.97" (1.2 cm - 5 cm) |
| Montaj Tipi | C-clamp, Halkalı Taban |
| Eğim Açısı | +50° / -20° |
| Dönme Açısı | +90° / -90° |
| Rotasyon | 360° (Yataydan Dikeye) |
| Yükseklik Aralığı | 9.09" - 19.69" (23.1 cm - 50 cm) |
| Maksimum Kol Uzatma | 21.93" (55.7 cm) |
| Entegre Limanlar | 1 x USB Type-C, 1 x USB Type-A 3.0 |
| Malzeme | Alüminyum |
| Renk | Siyah |
Ürün Videosu
Garanti ve Destek
For warranty information or technical assistance, please contact WALI customer support. WALI provides experienced and friendly US-based customer support available to assist 7 days a week.
Refer to the product packaging or the official WALI webEn güncel iletişim bilgileri ve garanti koşulları için siteyi ziyaret edin.
