giriiş
This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your TOTAL TP5434411 Gasoline Grass Trimmer & Bush Cutter. Please read these instructions carefully before using the product to ensure proper handling and to prevent injury or damage. Keep this manual for future reference.
Güvenlik Bilgileri
Elektrikli aletleri kullanırken her zaman güvenliğe öncelik verin. Güvenlik talimatlarına uyulmaması ciddi yaralanmalara neden olabilir.
- Kılavuzu okuyun: Kullanmadan önce tüm talimatları ve uyarıları anlayın.
- Kişisel Koruyucu Donanım (KKD): Always wear safety glasses, hearing protection, heavy-duty gloves, long pants, and sturdy, non-slip footwear.
- Çalışma Alanı: Keep the work area clear of other people, children, and pets. Maintain a safe distance from bystanders (at least 15 meters).
- Yakıt Kullanımı: Handle gasoline with extreme care. Store fuel in approved containers, away from ignition sources. Refuel outdoors, with the engine off and cool.
- Denetleme: Before each use, inspect the trimmer for loose parts, damage, or wear. Ensure all guards are in place and secure.
- Motor Kapalı: Always turn off the engine before making adjustments, clearing blockages, or performing maintenance.
- Temastan kaçının: Keep hands and feet away from the cutting attachment while the engine is running.
- Hava Koşulları: Yağmurda veya ıslak koşullarda çalıştırmayın.
- Tükenmişlik: Do not operate the trimmer when tired or under the influence of drugs or alcohol.
Bileşenlerview
Familiarize yourself with the main components of your TOTAL Gasoline Grass Trimmer & Bush Cutter.
Resim 1: The TOTAL TP5434411 Gasoline Grass Trimmer and Bush Cutter, fully assembled, shown with its engine unit, long shaft, handle, safety guard, and two cutting attachments: a 3-tooth metal blade and a line spool. The engine is at the top, the handle is positioned for ergonomic use, and the cutting attachments are at the bottom, ready for installation.
- Motor Ünitesi: Contains the 42.7cc, 2HP 2-stroke engine.
- Şaft: The long pole connecting the engine to the cutting head.
- Gidon: Ergonomic handle for control and maneuverability.
- Gaz Tetiği: Motor devrini kontrol eder.
- Güvenlik Görevlisi: Protects the user from debris and the cutting attachment.
- Kesme Kafası: Area where the cutting attachment (line spool or blade) is mounted.
- Line Spool (Trimmer Head): Used for cutting grass and light vegetation.
- 3-Tooth Blade (Bush Cutter Blade): Used for thicker brush and small saplings.
- Yakıt Tankı: Benzin ve yağ karışımı için.
Kurmak
1. Montaj
- Gidonu Takın: Securely fasten the handlebar to the shaft using the provided clamps and bolts. Ensure it is positioned comfortably for operation.
- Install the Safety Guard: Mount the safety guard to the lower part of the shaft, above the cutting head. Ensure it is firmly attached and provides adequate protection.
- Select and Install Cutting Attachment:
- For Grass Trimming (Line Spool): Attach the line spool to the cutting head. Follow the specific instructions in the manual for your model to ensure correct mounting.
- For Bush Cutting (3-Tooth Blade): Attach the 3-tooth metal blade to the cutting head. Ensure the blade is correctly oriented and securely fastened with the retaining nut and washer. Always use the appropriate tools for tightening.
2. Yakıt Karışımı
This unit uses a 2-stroke engine and requires a specific mixture of unleaded gasoline and 2-stroke engine oil. Refer to the engine manufacturer's recommendations for the exact mixing ratio (e.g., 25:1 or 50:1). Always use fresh, high-quality fuel and oil.
- Mix fuel in an approved container.
- Pour the correct amount of 2-stroke oil into the gasoline.
- Shake the container thoroughly to ensure proper mixing.
- Fill the trimmer's fuel tank carefully, avoiding spills. Do not overfill.
Kullanım Talimatları
1. Motorun Çalıştırılması
- Tıraş makinesini düz ve sabit bir yüzeye yerleştirin.
- AÇMA/KAPAMA düğmesinin "AÇIK" konumunda olduğundan emin olun.
- (Soğuk çalıştırma durumunda) Jikle kolunu devreye alın.
- Yakıt görünene kadar yakıt pompasına birkaç kez basın.
- Pull the starter cord firmly and smoothly until the engine attempts to start.
- Once the engine fires (or after a few pulls), disengage the choke.
- Motor düzgün bir şekilde çalışana kadar marş ipini tekrar çekin.
- Gaz pedalına basmadan önce motorun birkaç dakika ısınmasına izin verin.
2. Using the Trimmer/Cutter
- Tıraş makinesini iki elinizle sıkıca tutun ve dengeli bir duruş sergileyin.
- Keep the cutting attachment away from your body and other objects.
- Çim Biçme İşlemi İçin: Use a sweeping motion, cutting from right to left for optimal debris deflection. Do not force the line into thick vegetation.
- Çalı Kesimi İçin: Approach brush slowly and deliberately. Use the lower part of the blade for cutting. Be aware of kickback, especially when cutting thicker material.
- Maintain a consistent engine speed.
- Avoid hitting hard objects like rocks, fences, or concrete.
3. Motoru Durdurma
- Release the throttle trigger to allow the engine to idle.
- Açma/kapama düğmesini "KAPALI" konumuna getirin.
- Wait for all moving parts to come to a complete stop before setting the trimmer down.
Bakım
Düzenli bakım, çim biçme makinenizin optimum performans göstermesini ve ömrünü uzatmasını sağlar. Herhangi bir bakım işlemi yapmadan önce motorun kapalı ve soğuk olduğundan emin olun.
- Temizlik: After each use, clean the trimmer, especially the cutting head and air intake vents, from grass, dirt, and debris.
- Hava Filtresi: Check and clean the air filter regularly (e.g., every 10 hours of operation). Replace if damaged.
- Buji: Bujiyi periyodik olarak kontrol edin. Kirlenmiş veya aşınmışsa temizleyin veya değiştirin.
- Yakıt Filtresi: Check the fuel filter in the fuel tank for blockages. Replace if necessary.
- Kesme Aparatları:
- Line Spool: Replace trimmer line as needed. Ensure the correct diameter and type of line is used.
- Bıçak: Inspect the blade for sharpness and damage. Sharpen or replace dull/damaged blades.
- Genel muayene: Check all nuts, bolts, and fasteners for tightness. Inspect fuel lines for cracks or leaks.
- Depolamak: For long-term storage, drain the fuel tank or use a fuel stabilizer. Clean the unit thoroughly and store in a dry, secure location.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Motor çalışmıyor | Yakıt yok, jikle ayarı yanlış, buji arızalı, yakıt filtresi tıkalı. | Check fuel level and mixture, adjust choke, clean/replace spark plug, clean/replace fuel filter. |
| Motor zayıf çalışıyor/güç eksikliği var | Dirty air filter, incorrect fuel mixture, worn spark plug, carburetor issues. | Clean air filter, ensure correct fuel mixture, replace spark plug, consult service center for carburetor. |
| Cutting attachment not spinning | Obstruction, damaged drive shaft, clutch issue. | Turn off engine and clear obstruction, inspect drive shaft, consult service center. |
| Aşırı titreşim | Damaged or unbalanced blade, loose components. | Inspect and replace blade if damaged, tighten all fasteners. |
Özellikler
| Model Numarası | TP5434411 |
| Yerinden edilme | 42.7cc |
| Anma Gücü | 1.25Kw (2HP) |
| Maksimum Hız | 9000 devir/dakika |
| Max Cutting Path (Trimmer) | 420mm |
| Spool Liner Diameter | 2.4mm X 4m |
| Blade Diameter (3-teeth) | 255mm |
| Yakıt Tankı Kapasitesi | 1200ml |
| Motor Tipi | Powerful 2-stroke motor, Air cooled engine, single cylinder |
| Fonksiyonlar | Düzeltici ve Kesici |
| Ürün Ağırlığı | 10 kg (10000 gram) |
| Ürün Boyutları | 105 cm uzunluk x 52 cm genişlik Santimetre |
| Montaj Gerekli | Evet |
| Menşei ülke | Çin |
Garanti ve Destek
For warranty information, technical support, or to order replacement parts, please contact TOTAL customer service or your authorized dealer. Keep your purchase receipt as proof of purchase.
Specific warranty terms and conditions may vary by region. Refer to the warranty card included with your product or visit the official TOTAL webDetaylı bilgi için sitemizi ziyaret edebilirsiniz.
