1. Giriş
Thank you for choosing the EazeID D210S Label Maker. This portable device is designed for efficient and versatile labeling, suitable for various environments including home, office, and school. Featuring a user-friendly QWERTY keyboard and dual power options, it produces durable, laminated labels resistant to water, abrasion, fading, and temperature changes.
This manual provides detailed instructions on how to set up, operate, and maintain your label maker to ensure optimal performance and longevity.
2. Kurulum
2.1. Paket İçeriği
Başlamadan önce lütfen paketinizde tüm öğelerin mevcut olduğundan emin olun:
- EazeID D210S Gray label maker (1 unit)
- Sample label tape waterproof (12mm 0.47 laminated White, 4M) (1 unit)
- Tip-C Kablo (1 adet)
- Kullanım Kılavuzu (1 adet)
Image: Contents of the EazeID D210S Label Maker package, including the device, sample tape, Type-C cable, and manual.
2.2. Cihaza Güç Verme
The EazeID D210S label maker offers two power options:
- USB Tip-C Kablosu: Connect the included Type-C cable to the label maker and a compatible power adapter (not included). The device does not support charging via Type-C; it operates directly from the power source.
- AAA Piller: For portable use, insert 6 AAA batteries (not included) into the battery compartment located on the underside of the device. Ensure correct polarity.
Not:
- It is recommended to use a charger block with an output voltage of ±5V when using the Type-C cable.
- Do not leave batteries in the printer when it is powered by the USB Type-C cable.
Image: Illustration of the label maker's dual power options: USB Type-C for continuous power and AAA batteries for portability.
2.3. Etiket Bandının Takılması
To install the label tape:
- Etiket yazıcısının arkasındaki bant bölmesi kapağını açın.
- Insert the label tape cassette with the tape facing the print head. Ensure the tape is properly aligned and clicks into place.
- Kaset bölmesinin kapağını sıkıca kapatın.
Image: The label maker with its tape compartment open, illustrating the tape installation area and the integrated cutter.
3. Kullanım Talimatları
3.1. Temel Etiket Oluşturma
Follow these steps to create a basic label:
- Güç Açık: Etiketleme makinesini açmak için güç düğmesine basın.
- Klavye Girişi: İstediğiniz metni yazmak için QWERTY klavyeyi kullanın. Yazılan metin LCD ekranda görünecektir.
- Yazdır: Basın Yazdır Etiketi yazdırmak için düğme.
Image: A visual guide demonstrating the simple three-step process to operate the label maker.
3.2. Text Formatting and Special Functions
The D210S label maker includes a variety of built-in functions to customize your labels:
- Yazı Stilleri: Access 16 font styles using the dedicated Yazı tipi anahtar.
- Semboller: Choose from over 640 symbols using the Sembol anahtar.
- Çerçeveler: Apply over 100 frames to your labels using the Çerçeve anahtar.
- Diğer Fonksiyonlar: Utilize keys for Size, Width, Barcode, History, Mirror, and more for advanced customization.
Image: The label maker showcasing its extensive library of frames, symbols, and font options for creative labeling.
3.3. Printing Multiple Labels
The D210S offers efficient options for printing multiple labels:
- Multi-Copy Editing: Use the multi-copy editing one-touch key to continuously edit and print up to 55 different labels. This is ideal for creating a series of unique labels without re-entering the menu.
- Printing Identical Labels: To print multiple copies of the same label, it is advisable to print them all at once and then cut them individually. You can specify the number of copies (1-9) by pressing Vardiya + Yazdır, then using the navigation keys or a number key, and finally pressing OK or Yazdır.
Image: A flowchart demonstrating how to use the multi-copy function for sequential label printing.
Image: A guide on how to efficiently print multiple identical labels using the Shift + Print key combination.
3.4. Metin Temizleme
To clear text or formatting:
- Delete Letters One by One: Basın BS (Geri Al) anahtar.
- Delete All Text and Format: Basmak Temizlemek → OK → [Metin ve Biçim] → OK.
- Delete Text Only: Basmak Temizlemek → [Sadece yazı] → OK.
Image: A step-by-step guide on using the Clear function to remove text or formatting from the label maker's display.
3.5. Using the Built-in Cutter
After printing, use the integrated cutter to cleanly separate your label from the tape roll. The cutter is located on the side of the device. Press the cutter lever firmly to cut the label.
3.6. Optimizing Label Tape Usage
To reduce label tape costs, it is recommended to set the label margin to "Narrow" in the device settings. Navigate to Ayarlar → Marj → Dar.
Image: A visual comparison highlighting the tape-saving benefit of using the 'Narrow' margin setting on the D210S.
4. Bakım
4.1. Temizlik
To ensure optimal performance and print quality, regularly clean your label maker:
- Cihazın dışını yumuşak ve kuru bir bezle silin.
- If the print head becomes dirty, gently wipe it with a cotton swab dampened with isopropyl alcohol. Ensure the device is turned off and disconnected from power before cleaning.
- Remove any dust or debris from the tape compartment.
4.2. Bant Değişimi
When the label tape runs out or you wish to change tape types, follow the tape installation instructions in Section 2.3. Ensure you use compatible EazeID D210S label tapes for best results.
4.3. Depolama
Store the label maker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the AAA batteries to prevent leakage.
5. Sorun Giderme
If you encounter issues with your EazeID D210S Label Maker, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Cihaz açılmıyor | Low or dead batteries; USB cable not connected properly; incorrect power adapter. | Replace AAA batteries; ensure USB Type-C cable is securely connected; use a compatible 5V power adapter. |
| Poor print quality (faint, blurry, or missing lines) | Dirty print head; incorrect tape installation; low tape quality. | Clean the print head (see Section 4.1); re-install label tape correctly; ensure you are using genuine EazeID D210S compatible tape. |
| Tape jams frequently | Improper tape installation; foreign objects in tape path; tape not feeding smoothly. | Re-install tape, ensuring it is seated correctly; check for and remove any obstructions; ensure tape is not creased or damaged. |
| Etiket düzgün kesilmiyor | Kesici bıçak körelmiş veya tıkanmış. | Ensure no tape residue is blocking the cutter; if issues persist, contact customer support. |
| Ekrandaki hata mesajı | Belirli hata durumu. | Refer to the on-screen message for guidance. Common errors relate to tape issues (e.g., "Tape End"). Follow instructions or re-install tape. |
6. Özellikler
| Model Adı | D210S Gray Label Maker Machine |
| Marka | Eaze Kimliği |
| Baskı Teknolojisi | Termal |
| Bağlantı Teknolojisi | Klavye |
| Maksimum Medya Boyutu | 12mm |
| Maksimum Renkli Baskı Çözünürlüğü | 180 DPI |
| Maksimum Siyah Beyaz Baskı Çözünürlüğü | 203 DPI |
| Güç Kaynağı | Type-C Cable or 6 AAA Batteries |
| Ürün Boyutları | 5 x 5 x 2 inç |
| Ürün Ağırlığı | 1.26 pound |
| Dahil Bileşenler | Label maker, Sample label tape, Type-C Cable, User Manual |
| Çalıştırma Başına Maksimum Kopya Sayısı | 55 (different labels) |
7. Garanti ve Destek
7.1. Garanti Bilgileri
The EazeID D210S Label Maker comes with a limited warranty. Please refer to the warranty card included in your package or visit the official EazeID webGaranti kapsamı ve süresi ile ilgili detaylı şartlar ve koşullar için siteyi ziyaret edin.
7.2. Müşteri Desteği
For technical assistance, troubleshooting not covered in this manual, or inquiries about replacement parts and accessories, please contact EazeID customer support. Contact information can typically be found on the EazeID official websitede veya ürün ambalajında yer almamaktadır.
8. Ürün Videoları
Bu kılavuza eklenmek üzere sağlanan verilerde satıcıya ait resmi ürün videosu bulunamadı.
