1. Ürün Bittiview
The AMPBANK AB2000 is a powerful and portable jump starter designed to start 12V vehicles with up to 8.0L gasoline or 6.0L diesel engines. It also functions as a portable power bank and features an ultra-bright LED flashlight for emergency situations.

Resim: AMPBANK AB2000 Portable Jump Starter, highlighting its 2000A peak current, compatibility with 12V vehicles, and capacity for up to 8.0L gas and 6.0L diesel engines.
2. Güvenlik Bilgileri
Always read and understand all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Keep the jump starter power above 50% for optimal starting efficiency.
- Kablolar veya bağlantı noktaları hasarlıysa akü takviye cihazını kullanmayın.ampler zarar görür.
- Doğru kutup bağlantısını sağlayın (kırmızı klips)amp pozitif, siyah clamp (olumsuz'a).
- Cl'nin kısa devre yapmasını önleyinamps.
- Do not expose the device to water, rain, or extreme temperatures.
- Çocukların erişemeyeceği yerde saklayınız.
- The AMPBANK jump starter incorporates 8 safety protections: anti-spark, anti-overcharge, anti-short circuit, anti-reverse connection, anti-surge, reverse polarity protection, over-discharge protection, and over-voltage koruma.

Resim: Görsel temsili AMPBANK AB2000's 8 built-in safety protections, ensuring safe operation.
3. Kutuda Neler Var?
Tüm eşyaları dikkatlice paketinden çıkarın ve aşağıdakilerin eksiksiz geldiğinden emin olun:
- AMPBANK AB2000 Car Jump Starter (x1)
- Akıllı Bağlantılı Takviye Kablosuamp(x1)
- USB Type-C Şarj Kablosu (x1)
- Kullanıcı Kılavuzu (x1)
- EVA Carrying Case (x1)

Image: All components included in the AMPBANK AB2000 package, neatly arranged.
4. Ürün Özellikleri ve Bileşenleri
Familiarize yourself with the key features and ports of your AMPBANK AB2000 jump starter:
- Güç Düğmesi/Pil Göstergesi: Displays current battery level and turns the device on/off.
- Hızlı Başlangıç Bağlantı Noktası: Akıllı akü takviye kablolarına bağlanır.
- USB Type-C Input/Output (PD18W): Akü takviye cihazını ve diğer cihazları şarj etmek için.
- USB-A Çıkışı (5V/3A): Cep telefonlarını, tabletleri ve diğer USB ile çalışan cihazları şarj etmek için.
- DC Output (12-16.8V/10A): 12V DC cihazları çalıştırmak için.
- LED El Feneri: Provides illumination with multiple modes (stable, strobe, SOS).

Resim: AMPBANK AB2000 unit, showcasing its design and interface elements.
5. Atlama Marşını Şarj Etme
İlk kullanımdan önce tamamen şarj edin. AMPBANK AB2000. It is recommended to recharge the jump starter once every three months if not used for a long time to maintain battery health.
- Connect the provided USB Type-C charging cable to the Type-C input/output port on the jump starter.
- Connect the other end of the USB Type-C cable to a compatible USB wall adapter (not included) or car charger.
- The battery indicator lights will illuminate and flash during charging. All four lights will be solid when fully charged.
6. Kullanım Talimatları: Aracın Aküsünü Çalıştırma
Araç çalıştırma işlemine başlamadan önce akü takviye cihazının en az %50 şarjı olduğundan emin olun.
- Bağlantı Kablolarını Bağlayın: Insert the blue plug of the smart jumper cables into the jump start port on the AMPBANK AB2000. Ensure it is fully seated.
- Bataryaya takın:
- Ekle kırmızı pozitif (+) clamp Araç aküsünün pozitif (+) terminaline.
- Ekle siyah negatif (-) clamp aracın aküsünün negatif (-) terminaline.
akıllı clamp indicator light will show the connection status. A solid green light indicates a correct and ready connection.
- Aracı Başlat: Aracınıza binin ve motoru çalıştırın.
- Kabloları Çıkarın: Once the vehicle starts, immediately remove the black negative (-) clamp from the vehicle battery, then remove the red positive (+) clamp. Finally, disconnect the smart jumper cables from the jump starter.
Using "BOOST" Mode for Completely Dead Batteries
If the vehicle battery is completely dead or has very low voltage, the standard jump start procedure might not work. In such cases, use the "BOOST" function:
- Follow steps 1 and 2 above to connect the jumper cables to the jump starter and the vehicle battery.
- Press and hold the "BOOST" button on the smart clamp for 3 seconds. The indicator light will turn solid green, indicating "BOOST" mode is active.
- Immediately start the vehicle within 30 seconds. If the car does not start, the "BOOST" mode will exit, and you will need to repeat the process.
- Once the vehicle starts, immediately remove the black negative (-) clamp, ardından kırmızı pozitif (+) clamp, and finally disconnect the smart jumper cables from the jump starter.

Resim: AMPBANK AB2000 connected to a car battery, illustrating the "BOOST" mode button on the smart clamp for starting completely dead batteries.
7. Diğer Fonksiyonlar
7.1 Taşınabilir Güç Bankası
The AB2000 can charge various electronic devices:
- USB Type-C (PD18W) & USB-A (5V/3A): Connect your mobile phone, tablet, or other USB-powered devices using their respective charging cables to the appropriate output ports.
- DC Output (12-16.8V/10A): Use this port to power 12V DC devices, such as car vacuum cleaners or tire inflators (ensure compatibility).

Resim: AMPBANK AB2000 functioning as a portable power bank, charging a smartphone and a tablet simultaneously.
7.2 Ultra-Bright LED Light
Dahili LED el feneri, çeşitli durumlar için üç farklı mod sunar:
- Açmak/Kapatmak için: Press and hold the flashlight button for 3 seconds.
- Modları Değiştirmek İçin: Short press the flashlight button to cycle through modes: Stable Light → Strobe Light → SOS Signal.

Resim: AMPBANK AB2000's high-power LED flashlight in use, demonstrating its utility for illumination and emergency signaling.
8. Bakım
- Şarj etme: If the jump starter is not used for a long time, it is recommended to recharge it once every three months to prolong battery life.
- Temizlik: Cihazı temizlemek için yumuşak ve kuru bir bez kullanın. Sert kimyasallar veya aşındırıcı malzemeler kullanmayın.
- Depolamak: Store the jump starter in its EVA carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
9. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Araç çalışmıyor. | Akü takviye cihazının şarj seviyesi çok düşük. | Ensure the jump starter has at least 50% charge. Recharge if necessary. |
| Araç çalışmıyor. | Incorrect cable connection or dirty battery terminals. | Şunu kontrol etamps are securely connected to the correct battery terminals. Clean battery terminals if corroded. |
| Araç çalışmıyor. | Vehicle battery is completely dead. | Use the "BOOST" mode as described in Section 6. |
| akıllı clamp Gösterge ışığı kırmızı veya yanıp sönüyor. | Error in connection (e.g., reverse polarity, short circuit). | CL'nin bağlantısını kesamps and re-connect them correctly, ensuring red to positive and black to negative. Refer to safety information. |
| Jump starter not charging devices. | Jump starter battery is low or device is incompatible. | Check jump starter battery level. Ensure the device being charged is compatible with the output specifications. |
10. Özellikler
| Özellik | Detay |
|---|---|
| Örnek | AB2000 |
| Tepe Akımı | 2000A |
| Araç Uyumluluğu | 12V vehicles, up to 8.0L Gas / 6.0L Diesel Engines |
| Pil Kapasitesi | 59.2 Amp Saatler (Lityum İyon) |
| USB Tip-C Giriş/Çıkış | PD18W |
| USB-A Çıkışı | 5V/3A |
| DC Çıkış | 12-16.8V/10A |
| LED El Feneri | 300 Lumen (Stable, Strobe, SOS modes) |
| Ürün Ağırlığı | 3.02 pound |
| Paket Boyutları | 10.83 x 6.34 x 4.25 inç |
11. Garanti ve Destek
The AMPBANK AB2000 comes with a 1-year quality assurance warranty and a 30-day free refund period. Lifetime free technical support is also provided.
For any questions or support needs, please contact AMPBANK customer service.





