1. Giriş
Thank you for choosing the Pentair WhisperFlo VS2m Pool Pump. This variable speed pump is designed for efficient and reliable operation in various pool applications, offering significant energy savings and an intuitive user interface for easy programming and control. This manual provides essential information for the safe installation, operation, and maintenance of your pump.
Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the equipment or injury.
2. Güvenlik Bilgileri
UYARI: This product must be installed and serviced by a qualified pool professional in accordance with all applicable local and national codes and ordinances.
- Always disconnect power to the pump before performing any service or maintenance.
- Pompa hasarlıysa veya elektrik kabloları açıktaysa çalıştırmayın.
- Elektrik çarpması tehlikesini önlemek için pompanın uygun şekilde topraklanmasını ve bağlanmasını sağlayın.
- Keep children away from the pump and all pool equipment.
- Never run the pump dry. Ensure the pump is primed with water before starting.
3. Kurulum ve Kurulum
3.1 Paketin Açılması ve Muayene
Carefully remove the pump from its packaging. Inspect the pump for any signs of shipping damage. If damage is found, contact your supplier immediately.
3.2 Konum
Install the pump as close to the pool as possible to minimize friction loss from long suction lines. Ensure the location is well-ventilated, protected from excessive moisture, and allows for adequate access for maintenance.
Şekil 1: Ön taraf view of the Pentair WhisperFlo VS2m Pool Pump, showing the motor, pump housing, and control panel.
3.3 Tesisat Bağlantıları
The pump features 2" BSP threaded inlet/outlet ports. Unions for 50mm or 63mm pipe connections are included. Use appropriate thread sealant on all connections to ensure a watertight seal. Avoid overtightening connections.
Şekil 2: Yan view of the pump, illustrating the plumbing connections and overall compact design.
Figure 3: Technical drawing showing detailed dimensions (79L x 37W x 43H cm) and connection points for the WhisperFlo VS2m pump.
3.4 Elektrik Bağlantıları
All electrical wiring must be performed by a licensed electrician. Ensure the power supply matches the pump's voltage requirements (1.1 Kilovolts). The pump must be properly grounded and bonded according to local electrical codes.
4. Kullanım Talimatları
4.1 Pompanın Hazırlanması
Before initial startup, ensure the pump is filled with water. Remove the skimmer basket lid, fill the pump basket with water, and replace the lid securely. The WhisperFlo VS2m features fast self-priming capabilities.
4.2 Kontrol Paneli Üstüview
The pump features a simple and intuitive LCD screen displaying power, speed, and time. It includes three programmable speeds/times plus an override function.
Şekil 4: Üst view of the pump, highlighting the LCD control panel with buttons for speed, time, and quick clean functions.
4.3 Programming Speeds and Times
- Press the "Speed" button to cycle through available speeds or to enter programming mode.
- Use the "+" and "-" buttons to adjust the desired speed (RPM) or time duration.
- The LCD will display the current power consumption (Watts), speed, and remaining time.
- The pump supports 4 digital inputs for external control (optional communication cable PN. 356324Z).
4.4 Override Function
The override function allows for temporary operation at a specific speed, bypassing the programmed schedule. Refer to the on-screen instructions for activation.
5. Bakım
5.1 Skimmer Basket Cleaning
Regularly inspect and clean the pump's skimmer basket. Turn off the pump, release pressure, remove the lid, empty debris, and replace the basket and lid securely.
Şekil 5: Ön view of the pump, showing the transparent lid of the skimmer basket for easy inspection.
5.2 Kışa Hazırlık
In freezing climates, proper winterization is crucial. Drain all water from the pump and plumbing lines. Store the pump in a dry, protected area if necessary.
5.3 Genel Bakım
Keep the pump area clean and free of debris. Periodically check for leaks and ensure all connections are tight. The pump is constructed with stainless steel components for durability and has a salt resistance of 0.40%.
6. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Pompa çalışmıyor | No power, tripped breaker, motor overload, faulty wiring. | Check power supply, reset breaker, allow motor to cool, inspect wiring (call electrician if needed). |
| Pompa emiş yapmıyor | Low water level, air leak in suction line, clogged skimmer basket, closed valve. | Ensure adequate water level, check for leaks, clean skimmer basket, open all valves. |
| Azaltılmış akış | Clogged filter, dirty skimmer basket, air in system, impeller obstruction. | Clean filter, clean skimmer basket, check for air leaks, inspect impeller for debris. |
| Aşırı gürültü/titreşim | Cavitation (air in pump), worn bearings, loose mounting. | Check for air leaks, ensure proper water flow, inspect motor (professional service recommended). |
7. Özellikler
- Modeli: WFL-VS2
- Motor: Oversized 3 HP asynchronous motor reduced to 1.5 HP for high efficiency
- Güç Kaynağı: Elektrik kablosu
- Cilttage: 1.1 Kilovolt
- Maksimum Akış Hızı: Saatte 27000 Litre
- Ürün Ölçüleri (U x G x Y): 79x37x43 cm
- Ürün Ağırlığı: 24.5 Kilogram
- Giriş / Çıkış: 2" BSP with threading
- Parçaları: Unions included for 50mm or 63mm pipe
- Programmable Speeds: 3 speeds/times + Override
- Kontrol: Intuitive LCD screen, 4 digital inputs for external control (optional communication cable PN. 356324Z)
- Malzeme: Stainless Steel (internal components), other materials for housing
- Salt Resistance: %0.40
- Üretici: Bevo
8. Garanti ve Destek
For warranty information and technical support, please contact your authorized Pentair dealer or the seller, WeltenMarkts. Keep your purchase receipt as proof of purchase.
Satıcı: WeltenMarkts
ASIN: B0CZRTG5N3
