Godox X3 S Nano Touchscreen TTL Wireless Flash Trigger for Sony User Manual

1. Giriş

The Godox X3 S Nano Touchscreen TTL Wireless Flash Trigger is designed for Sony camera systems, providing wireless control over compatible flashes within the Godox X wireless radio system. This compact and lightweight trigger features an intuitive touchscreen interface for easy adjustment of flash settings.

It operates on a 2.4 GHz frequency, offering a wireless range of up to 328 feet (100 meters). Key functionalities include support for Sony's ADI / P-TTL system, high-speed sync up to 1/8000 second, and control over flash exposure compensation, modeling light, and zoom settings. The device is powered by an internal rechargeable battery and includes a USB-C port for charging and firmware updates.

2. Kutuda Neler Var?

Verify that all components are present upon unpacking your Godox X3 S Nano Flash Trigger:

• Godox X3 S Touchscreen TTL Wireless Flash Trigger for Sony
• USB-C Şarj Kablosu
• Çanta Carry

Image: Included components: Godox X3 S trigger, USB-C cable, and carry bag.

3. Ürün Bittiview

The Godox X3 S Nano features a compact design with a touchscreen interface and physical buttons for essential controls.

Resim: Ön view of the X3 S Nano, highlighting the touchscreen and control buttons.

Temel Bileşenler:

• Dokunmatik Ekran: Primary interface for adjusting settings.
• Flaş Yuvası Bağlantısı: For attaching to a camera.
• USB-C Bağlantı Noktası: Şarj ve yazılım güncellemeleri için.
• M/Q Button: Mode/Quick access button.
• Flaş Düğmesi: Test flash button.
• Kontrol Kadranı: Menülerde gezinmek ve değerleri ayarlamak için.

Resim: Yan view showing the control buttons and dial.

4. Kurulum

4.1 Pilin Şarj Edilmesi

The X3 S Nano has an internal rechargeable lithium-ion battery. Before first use, fully charge the device.

1. Connect the supplied USB-C cable to the USB-C port on the trigger.
2. USB-C kablosunun diğer ucunu bir USB güç adaptörüne (dahil değildir) veya bilgisayarın USB portuna bağlayın.
3. The charging indicator on the screen will show the charging status. The device is fully charged when the indicator shows full.

4.2 Kameraya Montaj

Attach the X3 S Nano to your Sony camera's hot shoe.

1. Slide the hot shoe foot of the X3 S Nano into the camera's hot shoe.
2. Secure the trigger by tightening the locking mechanism (if present) on the hot shoe mount.

4.3 Açma/Kapatma

Press and hold the power button (usually integrated with the control dial) for a few seconds to power on or off the device.

5. Kullanım Talimatları

5.1 Temel Arayüz Gezintisi

The X3 S Nano features a touchscreen for intuitive control. Tap on icons or values to select them, and use the control dial or on-screen +/- buttons to adjust settings.

5.2 Pairing with Flashes

To wirelessly control Godox X system flashes, ensure both the trigger and the flash units are set to the same channel and ID.

1. On the X3 S Nano, access the channel settings via the touchscreen. Select a channel (1-32).
2. Set a wireless ID (01-99 or OFF) if desired for interference prevention.
3. On your compatible Godox flash unit, set the same channel and ID.
4. The trigger should now be able to communicate with the flash. Perform a test flash using the flash button on the trigger.

5.3 Flaş Ayarlarının Düzenlenmesi

The touchscreen allows for quick adjustments:

• Flaş modu: Tap to switch between TTL, Manual (M), and Multi (Stroboscopic) modes.
• Grup Kontrolü: Select individual flash groups (A, B, C, etc.) to adjust their power levels or modes independently.
• Güç Çıkışı: In Manual mode, tap the power value and use the dial or +/- buttons to adjust from 1/1 to 1/256.
• Flaş Pozlama Telafisi (FEC): In TTL mode, adjust FEC from -3 to +3 EV.
• Yüksek Hızlı Senkronizasyon (HSS): The trigger supports HSS up to 1/8000 second when used with compatible cameras and flashes. This is typically enabled automatically or through camera settings.
• Modelleme Işığı: Control the modeling light on compatible flash units.
• Yakınlaştır: Adjust the flash head zoom for compatible units.

5.4 Firmware Güncellemesi

Godox resmi sitesini düzenli olarak kontrol edin. website for firmware updates. Connect the X3 S Nano to a computer via the USB-C cable and follow the instructions provided by Godox for the update process.

6. Bakım

6.1 Temizlik

• Use a soft, dry cloth to clean the exterior of the trigger.
• Dokunmatik ekran için, elektronik cihazlar için özel olarak tasarlanmış mikrofiber bir bez kullanın. Aşındırıcı malzemelerden veya sert kimyasallardan kaçının.
• Keep the hot shoe contacts clean and free of dust or debris.

6.2 Depolama

When not in use, store the X3 S Nano in its provided carry bag in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Sorun Giderme

8. Özellikler

Resim: Alt view displaying product information and regulatory details.

9. Garanti ve Destek

Garanti bilgileri ve teknik destek için lütfen resmi Godox web sitesine başvurun. webWeb sitesini ziyaret edin veya yerel distribütörünüzle iletişime geçin. Garanti talepleri için satın alma fişinizi satın alma belgesi olarak saklayın.

Godox Resmi Webalan: www.godox.com