Elitech 2 Yönlü Vana Manifold Göstergesi LMG-10W, Soğutucu Akışkan Ölçeği LMC-100A+, Kızılötesi Soğutma Kaçak Dedektörü ILD-200 Kullanım Kılavuzu

giriiş

This user manual provides comprehensive instructions for the Elitech HVAC/R service kit, which includes the Elitech LMG-10W 2-Way Valve Manifold Gauge, the Elitech LMC-100A+ Refrigerant Scale, and the Elitech ILD-200 Infrared Refrigeration Leak Detector. This kit is designed for professional HVAC/R technicians to perform accurate refrigerant charging, recovery, and leak detection tasks.

Figure 1: Elitech HVAC/R Service Kit components.

Ürün Bileşenleri

Elitech LMG-10W 2-Way Valve Manifold Gauge

The LMG-10W is a digital manifold gauge designed for precise measurement of pressure, temperature, and vacuum in HVAC/R systems. It features a clear display and robust construction for reliable performance.

• APP Kontrolü: Seamless integration with the Elitech Tools App for remote monitoring and control.
• Remote Firmware Upgrade: Allows for convenient updates to the device's software.
• Accurate Tightness Test Results: Provides precise data for system integrity checks.
• Instant Report Export: Generate and export reports for documentation.
• Otomatik Hesaplama: Calculates subcooling and superheat automatically.
• Uzun Pil Ömrü: Up to 200+ hours of operation.
• Ölçüm Aralığı: -14.5 to 800 psi.
• Kesinlik: ±%0.5 FS.
• Birimler: psi, kg/cm3, kPa, MPa, bar.
• Çalışma Sıcaklık Aralığı: 14~122°F / -10~50°C.

Figure 2: Elitech LMG-10W Digital Manifold Gauge with included accessories.

Figure 3: Key features and display of the Elitech LMG-10W.

Figure 4: Dimensions and detailed specifications of the Elitech LMG-10W.

Elitech LMC-100A+ Refrigerant Scale

The LMC-100A+ is a high-capacity electronic refrigerant charging and recovery scale, essential for accurate refrigerant handling.

• Kapasite: Up to 220lbs (100kg).
• Kesinlik: ±0.05% readings +10g.
• Birimler: Kg/Lb/Oz.
• Uzun Pil Ömrü: 40 saate kadar.
• Otomatik kapanma: Pil ömrünü korumak için 10 dakika hareketsizlikten sonra otomatik olarak kapanır.

Figure 5: Elitech LMC-100A+ Refrigerant Scale within its carrying case.

Figure 6: Battery life and auto shut-off features of the Elitech LMC-100A+.

Elitech ILD-200 Infrared Refrigeration Leak Detector

The ILD-200 is an advanced infrared leak detector designed to quickly and accurately pinpoint refrigerant leaks in HVAC/R systems.

• Detects All Halogenated Gases: Including CFCs, HFCs, HCFCs, HCs, HFOs, and mixed refrigerants (e.g., R11, R22, R404a, R410a, R600a, R1234yf, AZ-50, HP62, MP39).
• Anti-interference & High Precision: Ensures reliable detection in various environments.
• NDIR Sensor: Provides longer sensor life.
• Anında Yanıt: Quick detection of leaks.
• Standartlara Uygunluk: Meets SAE-2791 and SAE-2913 standards.
• Maksimum Hassasiyet: 0.1oz/yr.
• Pil: 3.7V 3000mAh.
• CE Belgesi: Güvenlik ve kalite sertifikalıdır.

Figure 7: Elitech ILD-200 Infrared Refrigerant Leak Detector.

Figure 8: Key features of the Elitech ILD-200.

Figure 9: Dimensions and detailed specifications of the Elitech ILD-200.

Kurmak

Before operating the Elitech HVAC/R service kit, ensure all components are properly set up and charged.

1. Paketin açılması: Carefully remove all items from the packaging. Verify that all components listed in the packing list are present and undamaged.
2. Pil Takma/Şarj Etme:
   • LMG-10W: Ensure the manifold gauge is charged or has sufficient battery life. Refer to the individual LMG-10W manual for specific battery type and charging instructions.
   • LMC-100A+: Install batteries as per the scale's instructions.
   • ILD-200: Charge the leak detector using the provided charger until the battery indicator shows full.
3. Uygulama Yükleme (İsteğe bağlı ancak önerilir): Download the "Elitech Tools" app from your device's app store (iOS and Android). This app allows for integrated management of Elitech tools.
4. Initial Calibration/Zeroing:
   • LMG-10W: Power on the manifold gauge. Perform a zero calibration as instructed in its specific manual to ensure accurate pressure readings.
   • LMC-100A+: Place the scale on a flat, stable surface. Power it on and press the "Z/T" button to zero the scale before placing any refrigerant cylinders on it.
   • ILD-200: Allow the leak detector to warm up as per its instructions. Ensure it is in a clean air environment when powered on to establish a baseline.
5. Hose Connection (LMG-10W): Connect the appropriate refrigerant hoses to the LMG-10W manifold gauge and to the HVAC/R system service ports as required for your specific task (e.g., charging, recovery, evacuation).

Kullanım Talimatları

This section provides general operating guidelines for using the Elitech HVAC/R service kit. Always refer to the specific manuals for each device for detailed operational procedures.

Refrigerant Charging/Recovery (Using LMG-10W and LMC-100A+)

1. Hortumları bağlayın: Connect the LMG-10W to the HVAC/R system's high and low-pressure service ports using the appropriate hoses. Connect the center hose to the refrigerant cylinder or recovery machine.
2. Place Cylinder on Scale: Place the refrigerant cylinder on the LMC-100A+ scale. Ensure the scale is zeroed before placing the cylinder.
3. Okumaları izleyin: Use the LMG-10W to monitor system pressures and temperatures. The LMC-100A+ will display the refrigerant weight.
4. Charge/Recover: Open the manifold valves as required for charging or recovery. Monitor the LMC-100A+ to ensure the correct amount of refrigerant is transferred.
5. Bağlantıyı kes: Once the process is complete, close all valves and carefully disconnect the hoses.

Leak Detection (Using ILD-200)

1. Güç Açık: Turn on the ILD-200 leak detector. Allow it to warm up and self-calibrate in a clean air environment.
2. Hassasiyeti Ayarlayın: Adjust the sensitivity setting (Low, Medium, High) based on the suspected leak size and environment. Start with a higher sensitivity for general scanning.
3. Tarama Sistemi: Slowly move the probe tip around suspected leak areas (e.g., joints, fittings, valves, coils). The detector will alarm and indicate the presence of refrigerant.
4. Pinpoint Leak: Once a leak is detected, move the probe slowly back and forth to pinpoint the exact source. The alarm intensity will typically increase as you get closer to the leak.
5. Doğrulamak: After identifying a leak, ventilate the area and re-scan to confirm the leak location.

Bakım

Proper maintenance ensures the longevity and accuracy of your Elitech HVAC/R service kit.

• Temizlik:
  • Tüm cihazları yumuşak bir bezle silin.amp Her kullanımdan sonra bezle silin.
  • Aşındırıcı temizleyiciler veya çözücüler kullanmayınız.
  • Keep the manifold gauge ports and scale platform free of debris.
• Depolamak:
  • Store all components in their original carrying cases or a protective environment when not in use.
  • Doğrudan güneş ışığından ve aşırı sıcaklıklardan uzakta, serin ve kuru bir yerde saklayın.
• Pil Bakım:
  • For rechargeable devices (LMG-10W, ILD-200), charge regularly, especially before long periods of storage.
  • Remove batteries from the LMC-100A+ if storing for extended periods to prevent leakage.
• Sensor/Probe Care (ILD-200):
  • Keep the sensor tip clean and free from contaminants.
  • Avoid exposing the sensor to excessive moisture or oil.
• Hose Inspection (LMG-10W):
  • Regularly inspect refrigerant hoses for cracks, wear, or damage. Replace if necessary to prevent leaks.

Sorun giderme

This section addresses common issues you might encounter with your Elitech HVAC/R service kit.

Özellikler

Detailed specifications for each component of the Elitech HVAC/R service kit.

Elitech LMG-10W 2-Way Valve Manifold Gauge

• Ölçüm Aralığı: -14.5 ila 800 psi
• Kesinlik: ±%0.5 FS
• Birimler: psi, kg/cm3, kPa, MPa, bar
• Pil Ömrü: 200+ saat
• Çalışma Sıcaklık Aralığı: 14~122°F / -10~50°C
• Boyutlar: Yaklaşık 4.3 x 7.1 x 1.8 inç
• Ağırlık: Yaklaşık 2.1 lbs

Elitech LMC-100A+ Refrigerant Scale

• Kapasite: 220 lbs'ye (100 kg) kadar
• Kesinlik: ±0.05% readings +10g
• Birimler: Kg/Lb/Oz
• Pil Ömrü: 40 saate kadar
• Otomatik kapanma: 10 dakikalık hareketsizlikten sonra
• Malzeme: Plastik

Elitech ILD-200 Infrared Refrigeration Leak Detector

• Maksimum Hassasiyet: 0.1oz/yr
• Yanıt Süresi: Hemen
• Pil: 3.7V 3000mAh
• Sensör Ömrü: 10 years (Infrared Sensor)
• Standartlar: Meets EN14624, SAE-162, SAE-2791, and SAE-2913 standards
• Boyutlar: Approximately 3.3 x 7.9 x 1.5 inches (main body), Probe overall length 15.5 inches
• Ağırlık: Yaklaşık 0.93 lbs

Garanti ve Destek

Elitech provides dedicated customer support for its products.

For technical questions, troubleshooting assistance, or warranty inquiries, please contact Elitech's US-based customer service team. They are available 24/7 via email or phone.

Refer to the Elitech official webEn güncel iletişim bilgileri için site veya ürün ambalajına bakın.