Vevor Commercial Cold Beverage Dispenser User Manual

giriiş

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Vevor Commercial Cold Beverage Dispenser, Model LYJ18Lx2. This unit is designed for commercial use, featuring two 9.5-gallon tanks for serving a variety of cold beverages.

Güvenlik Talimatları

Please read and understand all safety warnings and instructions before operating this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Cihazın doğru voltaj değerine sahip topraklı bir elektrik prizine bağlı olduğundan emin olun.tage.
• Hasarlı elektrik kablosu veya fişi ile makineyi çalıştırmayın.
• Çalışma sırasında ellerinizi ve yabancı cisimleri hareketli parçalardan uzak tutun.
• Ana üniteyi suya veya başka sıvılara batırmayın.
• Temizlik, bakım veya kullanmadığınız zamanlarda cihazınızın fişini çekiniz.
• This appliance is for commercial use only and should be operated by trained personnel.
• Ünite üzerindeki havalandırma açıklıklarını kapatmayın.
• Use only food-grade liquids in the tanks.

Ürün Bittiview

The Vevor Commercial Cold Beverage Dispenser is constructed with a durable stainless steel body and features two transparent food-grade polycarbonate tanks. It is designed for efficient cooling and mixing of various cold beverages.

Şekil 1: Ön view of the Vevor Commercial Cold Beverage Dispenser, showcasing its dual tanks and dispensing spigots.

Figure 2: Diagram illustrating the premium materials used in the dispenser's construction, including food-grade polycarbonate tanks and a multi-layered stainless steel body.

Figure 3: Illustration of the dispenser's extensive capacity, with each tank holding 18 liters (4.75 gallons) and featuring a 360-degree stirring blade for consistent mixing.

Şekil 4: Üzeriview of the high-efficiency cooling system, detailing its low noise operation, easy controls, efficient condenser, and stable compressor, maintaining temperatures between 7-12°C.

Şekil 5: Ayrıntılı view of user-friendly design elements, including non-slip feet, an effortless drink outlet, detachable drip trays for easy cleaning, and effective vent holes for heat dissipation.

Kurmak

Follow these steps for initial setup of your beverage dispenser:

1. Paketin açılması: Carefully remove all packaging materials. Inspect the unit for any damage incurred during shipping.
2. Atama: Place the dispenser on a stable, level surface. Ensure there is adequate ventilation around the unit, especially at the back and sides where the vent holes are located. Avoid placing it near heat sources or in direct sunlight.
3. Temizlik: Before first use, thoroughly clean the polycarbonate tanks, lids, stirring rods, and dispensing spigots. Refer to the 'Maintenance' section for detailed cleaning instructions.
4. Toplantı: Ensure the stirring rods are correctly installed in each tank. Place the cleaned tanks securely onto the main unit.
5. Drip Trays: Install the detachable drip trays beneath the spigots.
6. Güç Bağlantısı: Güç kablosunu, voltaj değerine uygun topraklı bir elektrik prizine bağlayın.tagBirimin gereksinimleri.

Kullanım Talimatları

Once the unit is set up and cleaned, you can begin operation:

1. Doldurma Tankları: Pour your desired cold beverages into the polycarbonate tanks. Do not overfill beyond the 'MAX' line indicated on the tanks.
2. Güvenli Kapaklar: Place the ABS external lids securely on top of each tank.
3. Güç Açık: Cihazın arkasında veya yanında bulunan ana güç şalterini açın.
4. Soğutmayı Etkinleştir: Locate the 'COOLING' switch (refer to Figure 4 for typical control panel layout) and turn it ON. The unit will begin to cool the beverages to the set temperature range of 7-12°C.
5. Karıştırmayı Etkinleştir: If your beverage requires continuous stirring (e.g., juice with pulp), locate the 'MIXING' switch and turn it ON. The 360-degree stirring blades will activate to prevent sediment and ensure consistent mixing.
6. Dağıtım: To dispense a drink, place a cup under the spigot and press the comfortable push handle. Release the handle to stop the flow.
7. Sıcaklık Ayarı: The unit maintains a temperature range of 7-12°C. If specific temperature adjustments are available, refer to the control panel for detailed instructions.

Bakım

Dispenserinizin uzun ömürlü ve hijyenik çalışması için düzenli temizlik ve bakım çok önemlidir.

• Günlük Temizlik: After each day of use, or when changing beverages, empty the tanks.
• Sökme: Turn off and unplug the unit. Carefully remove the tanks, lids, stirring rods, and drip trays.
• Yıkama Bileşenleri: Hand wash all removable parts (tanks, lids, stirring rods, drip trays, spigots) with warm, soapy water. Rinse thoroughly with clean water.
• Ana Ünite Temizliği: Ana ünitenin dışını bir bezle silinamp Bezle temizleyin. Aşındırıcı temizleyiciler kullanmayın veya ana üniteyi suya batırmayın.
• Kurutma: Ensure all parts are completely dry before reassembling to prevent water spots or bacterial growth.
• Yeniden montaj: Reassemble the unit, ensuring all parts are correctly in place.
• Havalandırma: Uygun hava akışını sağlamak ve aşırı ısınmayı önlemek için havalandırma deliklerini düzenli olarak kontrol edin ve temizleyin.

Not: While some specifications indicate dishwasher safety, hand washing is recommended for optimal care and longevity of components.

Sorun giderme

This section addresses common issues you might encounter with your beverage dispenser.

Özellikler

Detailed technical specifications for the Vevor Commercial Cold Beverage Dispenser.

Figure 6: Visual representation of key product specifications and typical uses.

Garanti ve Destek

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Vevor website. Herhangi bir garanti talebi için satın alma belgeniz olarak satın alma makbuzunuzu saklayın.

For further assistance, you may contact Vevor customer service through their official channels.