BITMAIN Antminer S19 95TH/S ASIC Madencilik Cihazı Kullanım Kılavuzu

giriiş

Welcome to the user manual for your BITMAIN Antminer S19 95TH/S ASIC Miner. This document provides essential information for the safe and efficient operation of your mining equipment. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your device.

Güvenlik Bilgileri

Genel Güvenlik Önlemleri

• Elektrik Tehlikesi: The Antminer S19 operates on 200-240V AC. Ensure all power connections are secure and that the electrical circuit can safely handle the miner's 3250W power consumption. Do not operate with damaged power cords.
• Isıtma ve Havalandırma: The miner generates significant heat. Ensure it is placed in a well-ventilated area with adequate airflow. Do not block the air inlets or outlets. Maintain a minimum of 20 cm clearance around all sides of the unit.
• Gürültü: The cooling fans produce considerable noise during operation. Consider placement in an area where noise will not be an issue.
• İşleme: The unit is heavy (approximately 37.9 pounds). Use proper lifting techniques or seek assistance to prevent injury.
• Çevresel Koşullar: Operate the miner within the specified temperature range of 0°C to 45°C (32°F to 113°F) and humidity levels to prevent damage. Avoid dusty or corrosive environments.

Paket İçeriği

Upon unpacking your Antminer S19, please verify that all the following items are present:

• BITMAIN Antminer S19 95TH/S Unit
• Integrated Power Supply Unit

Note: Power cables may or may not be included depending on the retailer. Please check your purchase details.

Ürün Özellikleri

Temel Yetenekler

• Hashing Power Prowess: The Antminer S19 delivers a substantial hashrate of 95 TH/S ± 3%, ensuring efficient processing for SHA256 algorithm-based cryptocurrencies like BTC, BCH, and BSV.
• Optimized Power Consumption: With a power draw of 3250 W ± 5% on the wall at 77°F (25°C), the S19 demonstrates power efficiency at 34.5 J/TH ± 5%, striking a balance between high performance and energy conservation.
• Çok Yönlü Güç Kaynağı: The miner accommodates various power configurations with an AC input voltage range of 200 to 240 V and a frequency range of 47 to 63 Hz, providing flexibility for different mining setups.
• Adaptable to Mining Environments: The S19 operates effectively in a wide range of conditions, with an operational temperature span of 32 to 113 °F (0 to 45 °C), storage temperature tolerance of -41 to 58 °F (-40 to 70 °C), and the ability to function in altitudes up to 2000 meters, making it suitable for diverse mining environments.

Kurulum Kılavuzu

1. Paketin Açılması ve Yerleştirilmesi

Carefully remove the Antminer S19 from its packaging. Place the unit on a stable, level surface in a well-ventilated area. Ensure there is at least 20 cm of clear space around all air intake and exhaust vents to allow for proper airflow and heat dissipation.

Resim: Ön taraf view of the Antminer S19 unit, showcasing its compact design and cooling fans.

2. Güç Bağlantısı

Connect the power cables from the integrated power supply unit to a compatible 200-240V AC power outlet. Ensure the power source is capable of supplying 3250W continuously. Use only power cables rated for the required voltage ve akım.

3. Ağ Bağlantısı

Connect one end of an Ethernet cable to the RJ45 port on the Antminer S19 and the other end to your network router or switch. A stable internet connection is crucial for mining operations.

Resim: Yakın çekim view of the Antminer S19's control board, highlighting the Ethernet port and status indicators for network and operation.

Kullanım Talimatları

1. İlk Yapılandırma

After connecting power and network, power on the miner. Allow a few minutes for the system to boot up. The status indicator lights on the control board will provide feedback on the boot process.

2. Web Arayüz Erişimi

• Find IP Address: Use an IP scanner tool (e.g., Advanced IP Scanner, Angry IP Scanner) on a computer connected to the same network to discover the miner's IP address.
• Erişim Arayüzü: Bir tane aç web browser (Chrome, Firefox, Edge) and enter the miner's IP address into the address bar.
• Giriş yapmak: You will be prompted for a username and password. Refer to the official Antminer documentation for default credentials (commonly 'root' for both username and password). Change default credentials immediately after initial login for security.

3. Mining Pool Configuration

Giriş yaptıktan sonra web arayüz:

• Navigate to the 'Miner Configuration' or 'Settings' section.
• Girin URL(s) of your chosen mining pool(s). It is recommended to configure at least two pools for redundancy.
• Input your worker name (usually your wallet address followed by a worker identifier, e.g., wallet_address.worker1).
• Enter the password for your worker (often 'x' or a specific password set on the pool).
• Save the changes. The miner will restart its hashing process with the new settings.

4. Çalıştırma İşlemi

After saving the mining pool configuration, the Antminer S19 will automatically begin hashing. Monitor the 'Miner Status' page in the web interface to confirm that the hash boards are operating correctly and submitting shares to your configured mining pool.

Bakım

1. Temizlik

Regular cleaning is essential for maintaining optimal performance and preventing overheating. At least once every 1-3 months, power down the miner and disconnect it from the power source. Use compressed air to gently remove dust accumulation from the cooling fans, heatsinks, and internal components. Do not use liquids for cleaning.

2. Çevresel Kontrol

Continuously monitor the ambient temperature and humidity of the operating environment. Ensure temperatures remain within the 0-45°C range. High humidity can lead to corrosion, while excessive dryness can increase static electricity risks. Proper ventilation is key to maintaining these conditions.

3. Ürün Yazılımı Güncellemeleri

Periodically check the official BITMAIN website for the latest firmware updates for your Antminer S19. Firmware updates can improve performance, enhance security, or fix bugs. Always follow the manufacturer's instructions precisely when performing firmware updates to avoid bricking the device.

Sorun giderme

Yaygın Sorunlar ve Çözümleri

• Güç Yok:
  • Verify power cable connections at both the miner and the wall outlet.
  • Prizin çalışır durumda olduğundan emin olmak için başka bir cihazla kontrol edin.
  • Confirm the circuit breaker has not tripped.
  • Ensure the power supply is receiving the correct 200-240V input.
• Ağ Bağlantısı Yok:
  • Ensure the Ethernet cable is securely connected to both the miner and the router/switch.
  • Check the network status lights on the miner and your router/switch.
  • Yönlendiricinizi/anahtarınızı yeniden başlatın.
  • Verify the miner's IP address and ensure there are no IP conflicts on your network.
• Low Hash Rate or No Hashing:
  • Review your mining pool configuration in the web interface for correct pool URL, worker name, and password.
  • Check the 'Miner Status' page to see if all hash boards are detected and operating.
  • Ensure the miner is not overheating; improve ventilation if necessary.
  • Confirm your internet connection is stable and has sufficient bandwidth.
• Aşırı Isınma:
  • Increase airflow around the miner.
  • Reduce the ambient room temperature.
  • Clean dust from the fans and heatsinks.
  • Verify that all cooling fans are spinning correctly.

For persistent issues not resolved by these steps, please refer to the official BITMAIN support resources.

Teknik Özellikler

Garanti ve Destek

Garanti Bilgileri

The BITMAIN Antminer S19 comes with a manufacturer's warranty. Please refer to the official BITMAIN website or your purchase documentation for specific warranty terms and conditions, including duration and coverage. It is important to note that for brand new BITMAIN Antminer units, if a return is not due to product malfunction, a 40% restocking fee may be applied. Please consider your purchase carefully.

Müşteri Desteği

For technical assistance, troubleshooting beyond the scope of this manual, or warranty claims, please contact BITMAIN customer support directly. Visit their official webDestek kaynakları, SSS ve iletişim bilgileri için site.