OMTech 90W CO2 Lazer Gravür Cihazı Kullanım Kılavuzu

1. Giriş

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your OMTech 90W CO2 Laser Engraver. This machine is designed for precision engraving and cutting of various non-metallic materials, featuring autofocus, a 20"x28" work area, and integration with LightBurn software. Please read this manual thoroughly before operating the equipment.

Image 1.1: The OMTech 90W CO2 Laser Engraver with its accompanying water chiller and LightBurn software logo, showcasing komple sistem.

2. Güvenlik Bilgileri

WARNING: This product contains a Class 2 laser. Improper use can result in serious injury.

• Göz Koruması: Always wear appropriate laser safety glasses when operating or observing the laser. The machine features a flame-resistant window for safe observation, but direct exposure to the laser beam must be avoided.
• Havalandırma: Ensure adequate ventilation is in place to remove fumes and particulate matter generated during engraving and cutting. Connect the exhaust system properly.
• Yangın Güvenliği: Keep a fire extinguisher nearby. Never leave the machine unattended during operation. Certain materials are highly flammable.
• Elektriksel Güvenlik: Ensure the machine is properly grounded. Do not operate with damaged power cords or in wet conditions.
• Malzeme Uyumluluğu: Only engrave or cut materials specified as safe for CO2 lasers. Avoid materials that produce toxic fumes or are highly reflective.

Image 2.1: The flame-resistant window allows for safe observation of the engraving process, protecting users from direct laser exposure.

3. Paket İçeriği

Kutuyu açtığınızda tüm bileşenlerin mevcut olduğundan emin olun:

• OMTech 90W CO2 Laser Engraver
• Water Chiller (CW-5200 Industrial Chiller)
• LightBurn Software License
• Honeycomb Workbed
• Aluminum Blade Workbed
• Air Assist Compressor
• Exhaust Fan and Ducting
• Güç kablosu
• USB kablosu
• Water Hoses and Clamps
• Tool Kit and Accessories

4. Kurulum

4.1 Paketten Çıkarma ve Yerleştirme

1. Lazer gravür cihazını ve tüm aksesuarlarını ambalajından dikkatlice çıkarın.
2. Place the machine on a stable, level surface capable of supporting its weight (approximately 258 lbs).
3. Makinenin etrafında havalandırma ve erişim için yeterli boşluk olduğundan emin olun.

4.2 Water Chiller Connection

The included CW-5200 water chiller is crucial for maintaining the laser tube's temperature and extending its lifespan.

Image 4.1: The CW-5200 industrial water chiller, essential for cooling the laser tube during operation.

1. Fill the water chiller reservoir with distilled water (approximately 6-7 liters). Do not use tap water.
2. Connect the chiller's inlet and outlet ports to the corresponding ports on the laser engraver using the provided hoses and clamps. Ensure a secure, leak-free connection.
3. Power on the chiller and allow it to circulate water and stabilize temperature before operating the laser.

4.3 Air Assist and Exhaust System

1. Connect the air assist compressor to the designated port on the laser engraver.
2. Attach the exhaust fan and ducting to the machine's exhaust port. Route the ducting to an outdoor vent or a suitable filtration system to safely remove fumes.

4.4 Elektrik ve Veri Bağlantıları

1. Connect the main power cable to a grounded electrical outlet.
2. Connect the laser engraver to your computer via USB or Ethernet cable.
3. Install the LightBurn software on your computer using the provided license key.

5. Kullanım Talimatları

5.1 Açma

1. Ensure the water chiller is running and circulating water.
2. Turn on the main power switch on the laser engraver.
3. The digital control panel will initialize.

Image 5.1: The digital control panel offers intuitive operation and compatibility with various design software, including LightBurn.

5.2 Material Loading and Autofocus

1. Place your material onto the desired workbed (honeycomb for cutting, blade for engraving). The machine includes both a honeycomb and an aluminum blade bed.
2. Makine kapağını kapatın.
3. Utilize the autofocus feature by pressing the designated button on the control panel or through LightBurn. The laser head will automatically adjust to the correct focal distance for your material.

Image 5.2: The rapid autofocus system eliminates manual adjustments, ensuring precise focal distance with a single button press.

5.3 Using LightBurn Software

1. Open LightBurn and import or create your design.
2. Set appropriate laser parameters (speed, power, number of passes) based on your material and desired outcome. Refer to material test guides for optimal settings.
3. Position your design on the virtual work area to match your material placement.
4. Send the job to the laser engraver.

Image 5.3: The LightBurn software interface, providing comprehensive control over design, settings, and job execution.

5.4 Gravür ve Kesme İşlemi

1. Initiate the job from the control panel or LightBurn.
2. Monitor the process through the flame-resistant window.
3. The machine operates at speeds up to 600 mm/s, significantly boosting productivity.

Image 5.4: The laser head moving rapidly across a workpiece, demonstrating the 600 mm/s engraving speed.

5.5 Using Four-Way Pass-Through Doors

For larger or longer materials that exceed the 20"x28" work area, utilize the four-way pass-through doors.

Image 5.5: The four-way pass-through design allows for processing materials longer than the workbed, enhancing versatility.

6. Bakım

Düzenli bakım, lazer gravür cihazınızın optimum performans göstermesini sağlar ve kullanım ömrünü uzatır.

• Lens and Mirror Cleaning: Periodically clean the optical lenses and mirrors with specialized lens cleaning solution and wipes to maintain laser beam quality.
• Water Chiller Maintenance: Change the distilled water in the chiller every 1-3 months, depending on usage. Monitor water temperature to ensure it remains within the recommended range.
• Çalışma Tezgahı Temizliği: Remove debris and residue from the honeycomb and blade workbeds regularly to prevent buildup and ensure proper material support.
• Hava Destekli Meme: Check and clean the air assist nozzle to ensure a clear path for compressed air, which helps prevent flare-ups and keeps the lens clean.
• Laser Tube Care: The Yongli H2 tube has a lifespan of up to 8,000 hours. Consistent use at lower power settings can extend its life. Handle with care during any inspection or replacement.

Image 6.1: The high-performance Yongli H2 laser tube, designed for efficiency and longevity.

7. Sorun Giderme

7.1 Yaygın Sorunlar ve Çözümler

8. Özellikler

Resim 8.1: Üzeriview of the OMTech 90W CO2 Laser Engraver's key specifications and features.

9. Garanti ve Destek

OMTech provides comprehensive customer support for its products.

• Satış Sonrası Destek: Haftanın 7 günü, günde 24 saat.
• Telefon: +1 (949) 438-4949
• E-posta Desteği: SUPPORT@OMTECHLASER.COM
• Teknik Destek: TECHSUPPORT@OMTLASER.COM

For the most current warranty information, please refer to the official OMTech website veya doğrudan müşteri hizmetlerine başvurun.