1. Giriş ve Güvenlik Bilgileri
Thank you for choosing the Wolf 25.4CC Petrol Chainsaw. This manual provides essential information for the safe and effective operation, maintenance, and care of your chainsaw. Please read and understand all instructions before operating the machine. Keep this manual for future reference.
1.1 Genel Güvenlik Uyarıları
- Daima uygun kişisel koruyucu ekipman (KKD) giyin including a safety helmet, eye protection, hearing protection, heavy-duty gloves, safety trousers, and safety boots.
- Never operate the chainsaw when fatigued, under the influence of alcohol, drugs, or medication.
- Keep children, bystanders, and animals at a safe distance (at least 10 meters) from the work area.
- Inspect the chainsaw before each use for loose parts, damage, or wear. Do not operate a damaged chainsaw.
- Uygun havalandırmayı sağlayın when operating the chainsaw, as exhaust fumes are toxic.
- Handle fuel with extreme care. Fuel is highly flammable. Refuel in a well-ventilated area with the engine off and cool.
- Rüşvet riskine dikkat edin. Kickback can occur when the moving chain at the tip of the guide bar contacts an object, or when the wood closes in and pinches the saw chain in the cut.
2. Ürün Bittiview
The Wolf 25.4CC Petrol Chainsaw is designed for domestic tree pruning and cutting tasks. It features a lightweight design and a powerful 0.8KW engine.
2.1 Dahil Bileşenler
- 1 x Wolf 25.4CC Petrol Chainsaw unit
- Kılavuz Çubuk
- Zincir testere
- Kılavuz Çubuk Kapağı
- Araç takımı
- Yakıt Karıştırma Şişesi
Image 1: The Wolf 25.4CC Petrol Chainsaw, accompanied by a fuel mixing bottle and a toolkit, as typically included in the package.
Resim 2: Yan view of the Wolf 25.4CC Petrol Chainsaw, showing the assembled guide bar and saw chain.
3. Kurulum ve Montaj
3.1 Assembling the Guide Bar and Chain
- Ensure the engine is off and the spark plug cap is disconnected for safety.
- Remove the chain brake cover by loosening the two nuts.
- Place the guide bar onto the studs, ensuring the chain tension pin aligns with the hole in the guide bar.
- Carefully fit the saw chain around the sprocket and into the groove of the guide bar. Ensure the cutting edges of the chain are facing the correct direction.
- Replace the chain brake cover and hand-tighten the nuts.
- Adjust the chain tension using the tensioning screw. The chain should be snug against the guide bar but still able to be pulled freely by hand. There should be no slack on the underside of the guide bar.
- Fully tighten the nuts to secure the chain brake cover and guide bar.
3.2 Fueling the Chainsaw
This chainsaw uses a 2-stroke petrol engine and requires a specific fuel mixture. Never use pure petrol.
- Yakıt Türü: Use unleaded petrol with an octane rating of 90 or higher.
- Yağ tipi: Hava soğutmalı motorlar için özel olarak tasarlanmış yüksek kaliteli 2 zamanlı motor yağı kullanın.
- Karıştırma Oranı: Refer to the chainsaw's label or manufacturer's recommendation for the exact petrol-to-oil ratio (e.g., 25:1 or 50:1). Use the provided fuel mixing bottle for accurate measurement.
- İşlem: Mix the fuel and oil thoroughly in a separate, approved fuel container. Pour the mixture into the chainsaw's fuel tank. Do not overfill.
- Zincir Yağı: Fill the chain oil reservoir with good quality chain lubricant. This is crucial for chain and bar longevity.
4. Motorlu Testerenin Çalıştırılması
4.1 Motorun Çalıştırılması
- Place the chainsaw on a firm, flat surface. Ensure the chain brake is engaged (pushed forward).
- Set the choke lever to the 'closed' (cold start) position.
- Yakıt görünene kadar yakıt pompasına birkaç kez basın.
- Pull the starter cord firmly and steadily until the engine fires briefly (usually 1-3 pulls).
- Once it fires, move the choke lever to the 'open' (run) position.
- Motor düzgün bir şekilde çalışana kadar marş ipini tekrar çekin.
- Allow the engine to warm up for a few moments.
- Disengage the chain brake (pull back towards the handle) before cutting.
4.2 Cutting Techniques and Safety
- Sıkıca tutun. on both handles with both hands.
- Stand with good balance and a wide stance.
- Avoid cutting with the tip of the guide bar to prevent kickback.
- Always be aware of falling branches and the direction of the cut.
- Omuz hizasından yukarıda kesmeyin.
- Çalışma alanını temizleyin. of obstacles and debris.
- Motorlu testereyi asla tek elle kullanmayın.
5. Bakım
Düzenli bakım, testerenizin en iyi performansı göstermesini sağlar ve ömrünü uzatır.
5.1 Günlük Bakım
- Hava filtresini temizleyin: Hava filtresini çıkarıp temizleyin. Hasarlıysa değiştirin.
- Check chain tension: Gerekirse ayarlayın.
- Inspect guide bar: Check for wear, burrs, and ensure the oil hole is clear.
- Sharpen chain: A sharp chain cuts efficiently and safely. Use a round file of the correct diameter for your chain.
- Clean the chainsaw: Remove sawdust and debris from the engine fins and chain brake mechanism.
5.2 Periyodik Bakım
- Buji: Bujiyi kontrol edin ve temizleyin. Aşınmış veya kirlenmişse değiştirin.
- Yakıt filtresi: Check and replace the fuel filter if clogged.
- Karbüratör ayarı: If the engine runs poorly, consult a qualified service technician.
5.3 Depolama
- Empty the fuel tank and run the engine until it stops to clear the carburetor.
- Motorlu testereyi iyice temizleyin.
- Apply a light coat of oil to the guide bar and chain to prevent rust.
- Store the chainsaw in a dry, well-ventilated area, out of reach of children.
6. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Motor çalışmıyor | No fuel, incorrect choke setting, fouled spark plug, flooded engine | Check fuel level, adjust choke, clean/replace spark plug, clear flooded engine (refer to manual) |
| Motor zayıf çalışıyor/güç eksikliği var | Dirty air filter, incorrect fuel mixture, dull chain, carburetor needs adjustment | Clean air filter, use correct fuel mixture, sharpen chain, consult service technician |
| Zincir hareket etmiyor | Chain brake engaged, incorrect chain tension, damaged clutch | Disengage chain brake, adjust chain tension, consult service technician |
| Aşırı titreşim | Gevşek parçalar, hasarlı zincir/çubuk | Check all fasteners, inspect chain and bar for damage, replace if necessary |
7. Özellikler
- Modeli: W25.4CC
- Motor Hacmi: 25.4CC
- Beygir gücü: 0.8KW
- Güç Kaynağı: Fuel Powered (Petrol)
- Ürün Ölçüleri (U x G x Y): 30 cm x 60 cm x 23.5 cm
- Ağırlık (yaklaşık): 4.5 kg (Paket ağırlığı)
- Bıçak Malzemesi: Alaşımlı Çelik
- Renk: Kırmızı/Sarı
- Özellik: Hafif
8. Garanti ve Destek
Wolf products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or spare parts inquiries, please contact the authorized Wolf service center in your region. Keep your proof of purchase for any warranty claims.
Image 3: The official Wolf Garten logo.
