Phanteks XT Pro Ultra

Phanteks XT Pro Ultra Orta Boy Oyun Kasası Kullanım Kılavuzu

Model: PH-XT523P1_DBK01

1. Giriş

Thank you for choosing the Phanteks XT Pro Ultra Mid-Tower Gaming Chassis. This manual provides essential information for setting up, operating, and maintaining your new PC case. Designed for high airflow and extensive component compatibility, the XT Pro Ultra offers a robust foundation for your gaming system.

The Phanteks XT Pro Ultra is a mid-tower gaming chassis featuring a high-airflow performance mesh design and a tempered glass window. It comes equipped with four M25-140 DRGB fans for optimal cooling and aesthetic appeal. This chassis supports a wide range of components, including the latest rear-side connector mainboards and large graphics cards.

Phanteks XT Pro Ultra Mid-Tower Gaming Chassis, angled view RGB fanlarla aydınlatılmış

Figure 1: Phanteks XT Pro Ultra Mid-Tower Gaming Chassis (Black)

2. Temel Özellikler

  • Anakart Uyumluluğu: Supports E-ATX, ATX, Micro ATX, and Mini ITX motherboards, including the latest rear-side connector mainboards.
  • Soğutma Çok Yönlülüğü: Accommodates up to 10x 120mm or 6x 140mm and 3x 120mm fan positions. Dedicated 360mm radiator support in the top without restrictions.
  • Ekran Kartı Desteği: Designed to support the largest graphics cards without compromise.
  • Dahil Edilen Fanlar: Comes with 4x M25-140 DRGB Fans for immediate high-performance cooling and vibrant lighting.
  • Yüksek Hava Akışı Tasarımı: Performance mesh front and top panels ensure excellent ventilation.
  • Tempered Glass Window: netlik sağlar view İç bileşenlerinizin.
  • Ön G / Ç: Features USB-C 3.2 Gen2 and USB 3.0 ports for modern connectivity.

3. Kurulum Kılavuzu

3.1. Şasinin Hazırlanması

Before installing components, ensure you have a clean, static-free workspace. Remove the side panels by unscrewing the thumbscrews at the rear of the chassis and gently sliding them off.

Phanteks XT Pro Ultra Mid-Tower Gaming Chassis, internal view with components installed

Şekil 2: Dahili view Şasinin

3.2. Anakart Kurulumu

Align your motherboard with the standoffs inside the chassis. Secure it using the provided screws. The XT Pro Ultra supports various motherboard form factors, including E-ATX.

3.3. Güç Kaynağı Ünitesi (PSU) Kurulumu

Install your power supply unit into the dedicated compartment at the bottom rear of the chassis. Secure it with screws from the rear. Route necessary cables through the cable management cutouts.

Phanteks XT Pro Ultra Mid-Tower Gaming Chassis, rear internal view showing PSU area

Şekil 3: Arka iç kısım view with PSU mounting area

3.4. Depolama Sürücüsü Kurulumu

The chassis offers flexible storage options for 3.5" HDDs and 2.5" SSDs. Utilize the designated mounting points behind the motherboard tray and within the PSU shroud area.

Diagram showing 3.5 inch HDD and 2.5 inch SSD mounting locations within the Phanteks XT Pro Ultra chassis

Figure 4: Storage drive mounting locations

3.5. Ekran Kartı Kurulumu

Install your graphics card into the appropriate PCIe slot on your motherboard. The XT Pro Ultra provides ample space for even the largest graphics cards.

3.6. Cooling System Setup (Fans & Radiators)

The chassis supports various fan and radiator configurations for optimal thermal performance. The included 140mm DRGB fans are pre-installed for convenience.

Diagram illustrating fan and radiator support for 120mm and 140mm sizes in various positions (front, top, rear, bottom) within the Phanteks XT Pro Ultra chassis

Figure 5: Fan and Radiator Support Diagram

3.7. Ön G/Ç Bağlantıları

Connect the front panel cables (USB 3.0, USB-C 3.2 Gen2, Audio, Power, Reset) to their respective headers on your motherboard. Refer to your motherboard manual for specific header locations.

Close-up diagram of the top front I/O panel of the Phanteks XT Pro Ultra, labeling USB 3.0, USB-C 3.2 Gen2, Reset Button, Audio/Microphone jacks, and Power Button

Figure 6: Front I/O Port Layout

4. Kullanım Talimatları

Once all components are securely installed and cables are connected, you can power on your system. Press the power button located on the top front panel of the chassis.

4.1. RGB Aydınlatma Kontrolü

The included M25-140 DRGB fans feature addressable RGB lighting. Connect the fan RGB cables to a compatible motherboard header or a dedicated RGB controller (if included or purchased separately) to customize lighting effects. Refer to your motherboard's software or RGB controller's manual for detailed instructions on managing lighting.

4.2. Hava Akışı Performansı

The XT Pro Ultra is designed for optimal airflow. Ensure that no obstructions block the front mesh panel or the top ventilation area to maintain efficient cooling. The pre-installed fans are configured to provide a balanced airflow path.

5. Bakım

5.1. Toz Filtresi Temizliği

Regularly clean the dust filters located on the front, top, and bottom of the chassis to prevent dust buildup and maintain optimal airflow. Filters can typically be removed by hand for easy cleaning with water and mild soap, or by vacuuming.

5.2. Genel Temizlik

Yumuşak bir d kullanınamp cloth to clean the exterior surfaces of the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass. For internal cleaning, use compressed air to remove dust from components and fans.

6. Sorun Giderme

6.1. Sistem Açılmıyor

  • Güç kablosunun güç kaynağına ve duvar prizine sağlam bir şekilde bağlı olup olmadığını kontrol edin.
  • Güç kaynağı anahtarının 'AÇIK' konumda olduğundan emin olun.
  • Ön panel güç düğmesi kablosunun anakart başlığına doğru şekilde bağlı olduğundan emin olun.
  • Tüm dahili güç bağlantılarının (24-pin ATX, CPU, GPU) düzgün şekilde yerleştirildiğinden emin olun.

6.2. Fans Not Spinning / RGB Not Lighting Up

  • Check if fan power cables are securely connected to the motherboard fan headers or fan controller.
  • Verify that RGB cables are correctly connected to the motherboard RGB headers or RGB controller.
  • Ensure any fan or RGB controllers are receiving power.

6.3. USB Bağlantı Noktaları Çalışmıyor

  • Confirm that the USB 3.0 and USB-C 3.2 Gen2 front panel cables are correctly connected to their respective motherboard headers.
  • Anakartınızın BIOS/UEFI ayarlarını kontrol ederek USB bağlantı noktalarının etkinleştirildiğinden emin olun.

For further assistance, please refer to the Phanteks official support resources.

7. Özellikler

ÖzellikDetay
MarkaFantekler
SeriXT Pro Ultra
Model NumarasıPH-XT523P1_DBK01
Dava TürüOrta kule
RenkSiyah
MalzemeSteel Chassis, Tempered Glass Window, ABS plastic
Ürün Ağırlığı18.01 pound
Ürün Boyutları (UxGxY)17.7 x 9.05 x 19.68 inç
Anakart UyumluluğuExtended ATX, Mini ITX, micro ATX, M-ATX, MINH-IIX, Mini ATX
USB 3.0 Port Sayısı1
USB 2.0 Port Sayısı1
Güç Kaynağı Montaj TipiAlt Montaj
Soğutma YöntemiHava
Phanteks XT Pro Ultra Mid-Tower Gaming Chassis with dimensions labeled: 19.68 inches height, 17.7 inches depth, 9.05 inches width

Figure 7: Chassis Dimensions

8. Garanti ve Destek

For detailed warranty information, please refer to the warranty card included with your product or visit the official Phanteks webSite. Satın alma belgenizi garanti talepleriniz için saklayın.

For technical support or further inquiries, please visit the Phanteks support page or contact their customer service directly. Contact information can typically be found on the official Phanteks webalan.