ROBOTIME 3D Wooden Puzzle Bundle Instruction Manual

1. Giriş

Welcome to the world of ROBOTIME 3D Wooden Puzzles! This instruction manual provides detailed guidance for assembling and operating your ST003 Luminous Globe and LK502 Treasure Box. These intricate models offer a rewarding building experience and result in beautiful, functional pieces.

Sorunsuz ve keyifli bir montaj süreci için lütfen montaja başlamadan önce tüm talimatları dikkatlice okuyun.

Image 1.1: The ROBOTIME ST003 Luminous Globe and LK502 Treasure Box assembled.

2. Güvenlik Bilgileri

Your ROBOTIME 3D Wooden Puzzle contains small parts and requires careful handling. Please observe the following safety guidelines:

• Boğulma Tehlikesi: This product contains small parts and is not suitable for children under 3 years old. Keep all components out of reach of infants and young children.
• Keskin kenarlar: Some wooden pieces may have slightly sharp edges after being punched out. Use caution during assembly and consider using fine-grit sandpaper (included) to smooth edges if necessary.
• Yanıcı Madde: The wooden components are flammable. Keep the product away from open flames, high heat sources, and direct sunlight for prolonged periods.
• Nem: Avoid exposing the wooden parts to water or high humidity, as this can cause warping or damage.
• Yetişkin Denetimi: Adult supervision is recommended for younger builders, especially during the initial stages montaj.

3. Paket İçeriği

Before starting assembly, please verify that all components are present. Each puzzle kit typically includes:

• Pre-cut wooden sheets (numbered for easy identification)
• Assembly instruction booklet (specific to each model)
• Zımpara kağıdı
• Wax (for lubricating gears)
• Small accessories (e.g., screws, springs, LED light kit for ST003)

If any parts are missing or damaged, please contact ROBOTIME customer support.

4. Montaj Talimatları

Montaj için genel ipuçları:

• Read Ahead: Always read the current and next few steps before detaching pieces.
• Punch Out Carefully: Gently push out pieces from the wooden sheets. If a piece is stubborn, use a craft knife or utility tool to carefully cut the connecting points.
• Sand Edges: Use the included sandpaper to smooth any rough edges or burrs on the pieces. This ensures a better fit and smoother operation.
• Wax Gears: For models with moving gears (like the ST003 and LK502), apply a small amount of wax to the gear teeth and axles to reduce friction and ensure smooth movement.
• Nazik Olun: Wooden pieces can be fragile. Avoid forcing pieces together. If a fit is too tight, gently sand the tab or slot until it fits snugly.

4.1. ST003: Luminous Globe Assembly

The ST003 Luminous Globe is a complex model involving gears and an internal lighting system. Follow the specific instruction booklet provided with the ST003 kit for detailed, step-by-step guidance. Key stages typically include:

1. Taban Montajı: Construct the intricate gear-driven base. Pay close attention to gear alignment and apply wax as instructed.
2. Globe Sphere Construction: Assemble the individual segments to form the globe sphere. Ensure the internal structure for the LED light is correctly placed.
3. LED Işık Montajı: Carefully install the LED light module and connect it according to the diagrams. Test the light before fully enclosing the globe.
4. Globe Mounting: Attach the assembled globe to the base, ensuring the rotation mechanism functions smoothly.
5. Outer Ring and Details: Add the outer rings, decorative elements, and any final touches.

Image 4.1: The ST003 Luminous Globe with its internal light activated, showcasing the intricate details.

4.2. LK502: Treasure Box Assembly

The LK502 Treasure Box involves assembling a functional locking mechanism. Refer to the specific instruction booklet provided with the LK502 kit for detailed, step-by-step guidance. Key stages typically include:

1. Box Frame Assembly: Construct the main body of the treasure box.
2. İç Mekanizma: Assemble the gears and levers that form the locking mechanism. This is the most critical part; ensure all parts move freely and are correctly aligned. Apply wax to moving parts.
3. Kapak Düzeneği: Construct the lid and integrate it with the locking mechanism.
4. Combination Dial: Attach the combination dial and ensure it interacts correctly with the internal lock.
5. Son Detaylar: Add any decorative elements and test the locking function.

Image 4.2: The LK502 Treasure Box shown with its lid open, displaying the intricate wooden locking mechanism inside.

5. Kullanım Talimatları

5.1. ST003: Luminous Globe Operation

• Rotasyon: The globe can be rotated manually. For continuous motion, locate the winding key on the base and gently turn it clockwise until resistance is felt. Do not overwind. The globe will then rotate slowly.
• Aydınlatma: Locate the small switch on the base of the globe. Flip the switch to turn the internal LED light on or off. Ensure batteries (if applicable and not pre-installed) are correctly inserted.

5.2. LK502: Treasure Box Operation

• Kombinasyonun Ayarlanması: The LK502 Treasure Box typically comes with a default combination or instructions on how to set your own. Refer to the LK502 instruction booklet for precise steps on setting or changing the combination. This usually involves aligning specific numbers or symbols on the dial.
• Kutunun Açılması: Once the combination is set, align the dial to the correct sequence. Then, turn the key or lever (if present) to unlock and open the lid.
• Kapatma ve Kilitleme: Close the lid firmly. Rotate the combination dial away from the set combination to lock the box. Ensure the lid is securely fastened before leaving it unattended.

Image 5.1: Users engaging with the LK502 Treasure Box, demonstrating its interactive nature.

6. Bakım

To ensure the longevity and proper functioning of your ROBOTIME 3D Wooden Puzzles, follow these maintenance tips:

• Temizlik: Dust the models regularly with a soft, dry cloth. Avoid using water or chemical cleaners, as they can damage the wood.
• Yağlama: If gears or moving parts become stiff, apply a small amount of the included wax (or a similar non-liquid lubricant like paraffin wax) to the contact points.
• Depolamak: Store the models in a dry place away from direct sunlight, extreme temperatures, and high humidity to prevent warping, fading, or damage to the wood.
• Dikkatli Kullanın: While durable, these are intricate models. Avoid dropping them or applying excessive force to any part.

7. Sorun Giderme

If you encounter any issues during or after assembly, refer to the table below for common problems and solutions:

8. Özellikler

9. Garanti ve Destek

ROBOTIME products are manufactured with high standards of quality. If you encounter any issues with your puzzle bundle, such as missing or defective parts, or require assembly assistance, please contact ROBOTIME customer support.

For the most up-to-date warranty information and contact details, please refer to the official ROBOTIME website veya ürün ambalajınızda yer alan iletişim bilgileri.