BWT Cosmy The Bot 250 Robotik Havuz Temizleyici Kullanım Kılavuzu

1. Giriş

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your BWT Cosmy The Bot 250 Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT Cosmy The Bot 250 is designed for effective pool cleaning, featuring powerful suction and efficient navigation. Its design facilitates easy handling, and the adjustable suction power allows for adaptation to various debris types.

Image 1.1: The BWT Cosmy The Bot 250 Robotic Pool Cleaner, shown with a smartphone displaying its remote control application.

2. Güvenlik Bilgileri

Yaralanma veya hasar riskini azaltmak için her zaman aşağıdaki güvenlik önlemlerine uyun:

• Ensure the power supply is disconnected before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repair.
• Havuz temizleme aracı çalışırken çocukları ve evcil hayvanları havuz alanından uzak tutun.
• Only use the cleaner in water temperatures between 10°C (50°F) and 35°C (95°F).
• Havuzda insanlar varsa temizleyiciyi kullanmayın.
• Ensure the cleaner is fully submerged before starting operation.
• Avoid lifting the cleaner by its cable. Always use the handle provided.

3. Ürün Bileşenleri

The BWT Cosmy The Bot 250 Robotic Pool Cleaner consists of the following main components:

• Ana Ünite: The robotic cleaner body, housing the motor and filtration system.
• Filtre Sepeti: Removable basket for collecting debris.
• Brushes/Rollers: Located on the underside for scrubbing pool surfaces.
• Yüzer Kablo: Connects the cleaner to the power supply unit.
• Güç Kaynağı Ünitesi: Converts AC power to safe DC power for the cleaner.

Resim 3.1: Ön view of the cleaner, highlighting the cleaning brushes and intake area.

Resim 3.2: Alt taraf view of the cleaner, illustrating the tracks and brush system for pool surface navigation and cleaning.

Resim 3.3: Dahili view of the cleaner, showing the gear and motor components responsible for its movement and cleaning action.

4. Kurulum

1. Temizleyiciyi ambalajından çıkarın: Temizleyiciyi ve tüm aksesuarlarını dikkatlice ambalajından çıkarın.
2. Yüzer Kabloyu Bağlayın: Connect the floating cable to the power supply unit. Ensure the connection is secure.
3. Havuzdaki Yer: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the unit.
4. Position Power Supply: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool, ensuring it is not exposed to direct sunlight or excessive moisture.
5. Eklenti: Güç kaynağı ünitesini topraklı bir elektrik prizine takın.

5. Kullanım Talimatları

1. Temizleme Döngüsünü Başlat: Press the power button on the power supply unit or use the remote control application (if applicable) to start the cleaning cycle. The cleaner will begin its programmed cleaning routine.
2. Emiş Gücünü Ayarlayın: The Cosmy The Bot 250 features adjustable intake valves. To increase or decrease suction power, manually adjust the height of the intake valves located on the underside of the unit. This allows for optimized debris collection.
3. Monitör Temizliği: The cleaner will navigate the pool floor and walls (depending on model features) to collect debris. Cleaning cycles are designed to be efficient and consume less energy.
4. End Cleaning Cycle: Once the cleaning cycle is complete, or if you wish to stop it manually, press the power button again.
5. Havuzdan Kaldır: Carefully pull the cleaner out of the water using its handle. Do not pull by the floating cable. Allow excess water to drain before placing it on a flat surface.

6. Bakım

Regular maintenance ensures optimal performance and extends the lifespan of your robotic pool cleaner.

6.1. Filtre Sepetinin Temizlenmesi

An indicator light will illuminate when the filter basket is full and requires cleaning.

1. Gücü Kesin: Always unplug the power supply unit from the electrical outlet before cleaning.
2. Open Filter Compartment: Locate the filter access button/latch on the top of the cleaner and open the lid.
3. Filtre sepetini çıkarın: Filtre sepetinin sapını kavrayın ve temizleyiciden çıkarın.
4. Durulama Filtresi: Use a garden hose to thoroughly rinse the filter basket, removing all trapped debris. Ensure all mesh surfaces are clear.
5. Filtreyi Yeniden Ekle: Place the clean filter basket back into the cleaner, ensuring it is properly seated.
6. Kapağı Kapatın: Close the filter compartment lid securely.

Resim 6.1: Üst view of the cleaner with the filter compartment open, showing the filter basket inside.

Image 6.2: The filter basket removed from the cleaner, ready for rinsing.

6.2. Genel Temizlik ve Depolama

• After each use, rinse the cleaner with fresh water to remove any pool chemicals or debris.
• Inspect the brushes and tracks for any tangled debris (hair, leaves, etc.) and remove them.
• Store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures.
• Coil the floating cable loosely to prevent kinks or damage.

7. Sorun Giderme

If you encounter issues with your BWT Cosmy The Bot 250, refer to the following common problems and solutions:

Bu çözümleri denedikten sonra sorun devam ederse lütfen müşteri desteğiyle iletişime geçin.

8. Özellikler

9. Garanti ve Destek

For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly:

Üretici: STEWARD GROUP, LLC

Please have your model number (Cosmy The Bot 250, RURN-NOYO-S2M70) and purchase date available when contacting support.