Total TGSLI201286 900W Lithium-Ion 12-Inch Chain Saw User Manual

1. Giriş

The Total TGSLI201286 900W Lithium-Ion Chain Saw is a powerful and efficient tool designed for various cutting tasks. This cordless chain saw features a brushless motor, a 12-inch chain bar, and is powered by two 20V 4.0Ah lithium-ion batteries. It includes a quick charger for convenience. Key safety features such as a quick brake function and automatic lubrication are integrated to enhance user protection and tool longevity. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your chain saw.

Şekil 1: Üzeriview of the Total TGSLI201286 900W Lithium-Ion 12-Inch Chain Saw.

2. Güvenlik Talimatları

Elektrikli aletleri kullanırken yangın, elektrik çarpması ve kişisel yaralanma riskini azaltmak için temel güvenlik önlemlerine her zaman uyun. Kullanmadan önce tüm talimatları okuyun ve anlayın.

• Kişisel Koruyucu Donanım (KKD): Always wear safety glasses, hearing protection, gloves, and sturdy footwear. A hard hat and leg protection are also recommended.
• Çalışma Alanı Güvenliği: Keep the work area clean and well-lit. Do not operate the chain saw in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Elektriksel Güvenlik: Topraklanmış veya topraklanmış yüzeylerle vücut temasından kaçının. Elektrikli aletleri yağmura veya ıslak koşullara maruz bırakmayın.
• Chain Saw Grip: Always hold the chain saw firmly with both hands when operating. Ensure a secure grip on both the front handle and the rear handle.
• Geri Tepme Önleme: Be aware of the risk of kickback. Avoid the guide bar tip contacting any object. Use caution when re-entering a cut.
• Pil Güvenliği: Use only the specified battery packs and charger. Do not short-circuit, disassemble, or expose batteries to high temperatures or fire.
• Bakım: Disconnect the battery pack before making any adjustments, changing accessories, or storing the chain saw.
• Çocuklar ve Çevredekiler: Çocukları ve çevredekileri çalışma alanından güvenli bir mesafede tutun.

3. Bileşenler ve Özellikler

The Total TGSLI201286 chain saw is equipped with several features designed for performance and safety.

• Fırçasız Motor: Provides improved performance, efficiency, and extended tool life compared to brushed motors.
• 12-Inch Chain Bar and Chain: A robust cutting system suitable for various tree maintenance and wood cutting tasks.
• 20V 4.0Ah Lithium-Ion Batteries (x2): Two high-capacity batteries provide extended runtime and consistent power.
• Hızlı Şarj Cihazı: Designed to rapidly charge the lithium-ion batteries, minimizing downtime.
• Quick Brake Function: Enhances safety by rapidly stopping the chain in the event of kickback or when the trigger is released.
• Automatic Lubrication System: Ensures continuous lubrication of the chain and guide bar during operation, reducing wear and friction.
• Ergonomik Tasarım: Features comfortable handles for improved control and reduced operator fatigue.

4. Kurulum

4.1 Pillerin Şarj Edilmesi

Before first use, fully charge both 20V 4.0Ah lithium-ion batteries using the provided quick charger.

1. Pil takımını şarj cihazına takın. Yerine oturduğundan emin olun.
2. Plug the charger into a standard 220-240V/50/60Hz power outlet.
3. Şarj cihazı gösterge ışığı şarj durumunu gösterir. Belirli ışık düzenleri için şarj cihazının kullanım kılavuzuna bakın.
4. Pil tamamen şarj olduğunda, pil takımını şarj cihazından çıkarın.

Figure 2: The 20V 4.0Ah Lithium-Ion batteries and quick charger included with the chain saw.

4.2 Kılavuz Çubuğunun ve Zincirin Takılması

Ensure the battery is removed before performing any assembly.

1. Sabitleme somunlarını gevşeterek zincir kapağını çıkarın.
2. Place the chain around the drive sprocket and then guide it into the groove of the guide bar. Ensure the cutting edges of the chain are facing the correct direction (refer to the arrow on the chain or guide bar).
3. Position the guide bar studs through the holes in the guide bar.
4. Zincir kapağını yerine takın ve sabitleme somunlarını elle sıkın. Henüz tamamen sıkmayın.

Şekil 3: Yakın çekim view of the 12-inch guide bar and chain assembly.

4.3 Zincir Gerginliğinin Ayarlanması

Correct chain tension is crucial for safe and efficient operation.

1. With the chain cover retaining nuts slightly loose, use the chain tensioning screw (often a red dial or screw on the side) to adjust the chain tension.
2. The chain should be snug against the guide bar, but still able to be pulled freely by hand. There should be no sag on the underside of the guide bar.
3. Once the tension is correct, fully tighten the chain cover retaining nuts.

Figure 4: Detail of the chain tension adjustment mechanism on the chain saw.

4.4 Zincir Yağ Haznesinin Doldurulması

The automatic lubrication system requires chain oil for proper function.

1. Locate the oil filler cap on the chain saw body.
2. Unscrew the cap and fill the reservoir with appropriate chain and bar oil. Do not use motor oil or waste oil.
3. Kapağı güvenli bir şekilde değiştirin.

5. Kullanım Talimatları

5.1 Operasyon Öncesi Kontrol Listesi

• Tüm güvenlik ekipmanlarının giyildiğinden emin olun.
• Zincir gerginliğini kontrol edin.
• Verify chain oil reservoir is full.
• Zincirin keskinliğini ve hasarını kontrol edin.
• Çalışma alanının engellerden ve çevredeki kişilerden arındırılmış olduğundan emin olun.
• Insert a fully charged battery pack into the chain saw.

5.2 Motorlu Testerenin Çalıştırılması

1. Zincir testereyi iki elinizle sıkıca tutun.
2. Engage the safety lock-off button (if present).
3. Press the trigger switch to start the motor. The chain will begin to move.

5.3 Cutting Techniques (Basic)

• Dengeyi Koruyun: Always stand with a firm footing and maintain good balance.
• Gümrükleme: Ensure the area around the cutting path is clear.
• Kesme Açısı: Approach the material at an appropriate angle, allowing the chain to do the work. Do not force the saw.
• Rüşvetten kaçının: Be extremely cautious of the guide bar tip. Never cut with the tip of the guide bar.
• Dallanma: When limbing, work from the bottom up to avoid pinching the guide bar.

5.4 Stopping the Chain Saw

Release the trigger switch. The quick brake function will rapidly stop the chain. For extended breaks or when moving between work areas, remove the battery pack.

6. Bakım

Regular maintenance ensures the longevity and safe operation of your chain saw. Always remove the battery pack before performing any maintenance.

6.1 Cleaning the Chain Saw

• After each use, clean sawdust, chips, and debris from the chain saw body, guide bar, and chain.
• Use a brush or compressed air. Avoid using water directly on electrical components.

6.2 Zincir Bileme

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or replace it when dull or damaged. Refer to the chain manufacturer's instructions for proper sharpening techniques and file boyutları.

6.3 Kılavuz Çubuğu Bakımı

• Kılavuz çubuğunun oluğunu temizleyerek talaş ve döküntüleri giderin.
• Periodically flip the guide bar to ensure even wear.
• Check the guide bar for burrs or damage. File down any burrs.

6.4 Pil Bakımı ve Saklama

• Pilleri serin ve kuru bir yerde, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzakta saklayın.
• Do not store fully discharged batteries for extended periods. Charge them periodically.
• Remove batteries from the chain saw when not in use.

6.5 Chain Oil Management

Regularly check the chain oil level and refill as needed. Use only recommended chain and bar oil.

7. Sorun Giderme

This section addresses common issues you might encounter with your chain saw.

8. Özellikler

Technical specifications for the Total TGSLI201286 900W Lithium-Ion Chain Saw.

9. Garanti ve Destek

For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, spare parts, or service inquiries, please contact Total Inc. customer service through their official webLütfen web sitemizi veya ürün ambalajınızda belirtilen iletişim bilgilerini kullanın.