Owon SPM6103

OWON SPM6103 DC Power Supply and Multimeter User Manual

Modeli: SPM6103

1. Giriş

The OWON SPM6103 is a versatile 2-in-1 instrument combining a high-resolution DC power supply and a 4 1/2 digit multimeter. It offers an output power of 300W with a voltage range of 0-60V and a current range of 0-10A. Key features include a 2.8-inch LCD, 10mV/1mA power resolution, output voltage and current curve monitoring, and multiple protection mechanisms. The integrated multimeter supports measurements for voltage, current, capacitance, resistance, continuity, and diode testing.

2. Güvenlik Bilgileri

Before operating the OWON SPM6103, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

  • Ensure the device is connected to a properly grounded AC power outlet.
  • Cihazı ıslak veya nemli ortamlarda çalıştırmayın.amp koşullar.
  • Cihazı açmayınasing; Sigorta dışında içeride kullanıcı tarafından onarılabilecek hiçbir parça bulunmamaktadır. Bakım işlemlerini yetkili personele yaptırın.
  • Doğru hacmi doğrulayıntage and current settings before connecting to a circuit to prevent damage to the device under test.
  • Use only the specified fuse type and rating for replacement.
  • Avoid touching live terminals during operation.

3. Ürün Bittiview

3.1 Ön Panel

The front panel features the 2.8-inch LCD display, control buttons, an adjustment knob, output terminals, multimeter input jacks, and a 5V/1A USB host port.

OWON SPM6103 Front Panel Overview
Figure 1: OWON SPM6103 Front Panel Overview. This image displays the main screen, control buttons (F1-F4, Memory, List, Auto ON, V, I, Ω/OVP/OCP, DISP, Mode, On/Off), the adjustment knob, output terminals (red and black), multimeter input jacks (VΩ-Hz, A, COM), and the 5V/1A USB host port.
Detailed Front Panel Controls
Figure 2: Detailed Front Panel Controls. This image highlights the functions of various controls: Voltage setting, Current setting, Over voltage/current protection, resistance, capacitance, diode, and continuity measurement types, Switch different display modes, Mode button for switching between DC power supply or Multimeter modes, and the Adjustment Knob.

3.2 Arka Panel

The rear panel includes the AC power input jack, power button, fuse holder, and a device USB port for PC connectivity.

OWON SPM6103 Rear Panel Connections
Figure 3: OWON SPM6103 Rear Panel Connections. This image shows the Intelligent Temperature Cooling Fan, AC Power Input Jack (100-120V AC), Power Button, Fuse, and Device USB Port.

4. Kurulum

4.1 Paketin Açılması ve Muayene

Carefully remove the SPM6103 from its packaging. Inspect the device for any signs of physical damage. Retain the packaging for future transport or storage.

4.2 Güç Bağlantısı

  1. Arka paneldeki güç anahtarının KAPALI konumunda olduğundan emin olun.
  2. Connect the provided AC power cord to the AC power input jack on the rear panel (refer to Figure 3).
  3. Plug the other end of the power cord into a grounded AC power outlet (100-120V AC).

4.3 Test Uçlarının Bağlanması

For power supply output, connect test leads to the red (+) and black (-) output terminals on the front panel. For multimeter measurements, connect probes to the VΩ-Hz, A, and COM input jacks as appropriate for the measurement type.

4.4 İlk Güç Açma

Press the power button on the rear panel to turn on the device. The 2.8-inch LCD will illuminate, displaying the startup sequence and then the default operating screen.

5. Kullanım Talimatları

5.1 Güç Kaynağı Modu

  1. Ayar Hacmitage ve Akım: Use the 'V' and 'I' buttons to select the voltage or current parameter. Rotate the adjustment knob to change the value. Press the knob to confirm or switch between coarse/fine adjustment.
  2. Çıkış Kontrolü: Press the 'On/Off' button to enable or disable the power output. The display will indicate the output status.
  3. Curve Monitoring: The device can display output voltage and current curves. Use the 'DISP' button to cycle through display modes until the curve monitoring screen is shown.
  4. List Waveform Editing: The SPM6103 supports editing and outputting 10 groups of timing outputs. Press the 'List' button to access this function.
  5. Memory Shortcuts: Four groups of memory shortcut parameters are available for quick output settings. Use the 'Memory' button to save or recall these settings.
List Waveform Editing and Charging Function
Figure 4: List Waveform Editing and Charging Function. This image illustrates the device's capability to perform timed output sequences and charge external devices via the 5V USB port.

5.2 Multimetre Modu

The SPM6103 integrates a 4 1/2 digit multimeter with auto-ranging capabilities.

  1. Anahtarlama Modları: Press the 'Mode' button to switch between DC power supply and Multimeter modes.
  2. Ölçümler: Connect the multimeter probes to the appropriate input jacks (VΩ-Hz, A, COM). The device supports measuring voltage, current, capacitance, resistance, continuity, and diode (0-2V).
Multimeter Function in Use
Figure 5: Multimeter Function in Use. This image shows the SPM6103 measuring voltage with test probes connected to a circuit board.

5.3 USB Host Port (5V/1A)

The front panel features a 5V/1A USB host port for charging small electronic devices or powering USB-compatible accessories.

6. Bakım

6.1 Temizlik

To clean the device, disconnect it from all power sources and use a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the device.

6.2 Sigorta Değişimi

The device is equipped with a user-replaceable fuse located on the rear panel (refer to Figure 3). If the device fails to power on, check the fuse. To replace:

  1. Güç kablosunu AC prizinden çıkarın.
  2. Use a flat-head screwdriver to open the fuse holder.
  3. Remove the old fuse and replace it with a new fuse of the same type and rating (e.g., 10A, 250V).
  4. Close the fuse holder securely.

6.3 Soğutma Fanı

The SPM6103 includes an intelligent temperature-controlled fan for heat dissipation. The fan will activate automatically when the internal temperature rises. Ensure the rear panel's fan vents are not obstructed to allow for proper airflow.

Dahili View with Cooling Fan and USB Port
Şekil 6: Dahili View with Cooling Fan. This image provides a view of the internal components, highlighting the cooling fan for efficient heat dissipation.

7. Sorun Giderme

  • Cihaz açılmıyor: Check the AC power cord connection and verify the fuse on the rear panel. Replace the fuse if blown.
  • No output from power supply: Ensure the 'On/Off' button has been pressed to enable output. Check that voltage and current limits are set appropriately.
  • Multimetre ölçümleri doğru değil: Verify probe connections are secure and correctly inserted for the desired measurement type. Ensure the 'Mode' is set to Multimeter.
  • 5V USB host port not charging: Some users have reported issues with the 5V USB connection. Ensure the connected device is compatible and try a different USB cable. If the issue persists, contact support.
  • PC software display in incorrect language: If using the PC software, locate the language settings within the application. For initial setup, a button in the lower-left corner of the software interface may switch the display to English.
  • Fan gürültüsü: The intelligent temperature-controlled fan will operate when the device reaches a certain temperature. This is normal. If the fan runs excessively or makes unusual noises, ensure vents are clear.

8. Özellikler

ÖzellikŞartname
ÖrnekSPM6103
Çıkış Gücü300W
Çıkış Hacmitage0-60V
Çıkış Akımı0-10A
Güç Çözünürlüğü10mV / 1mA
Multimeter Digits4 1/2 Digits
Multimetre FonksiyonlarıCilttage, Current, Capacitance, Resistance, Continuity, Diode (0-2V)
USB Ana Bilgisayar Bağlantı Noktası5V / 1A
Görüntülemek2.8 inç LCD
KorumalarAşırı Hacimtage Protection (OVP), Over Current Protection (OCP), Over Heating Protection, Over Circuit Protection, Over Load Protection
Timing Output Groups10 groups editable
Memory Parameters4 groups shortcut parameters
Boyutlar22.58x8.2x14.2 cm
Ağırlık1.5 kilo

9. Garanti ve Destek

For warranty information, technical support, or service inquiries, please contact OWON customer service or refer to the official OWON webalan. Garanti talepleri için satın alma makbuzunuzu saklayın.

İlgili Belgeler - SPM6103

Önview OWON SPM Series DC Power Supply and Multimeter User Manual
User manual for the OWON SPM Series, a versatile 2-in-1 DC power supply and multimeter. Learn about its features, specifications, and operation for efficient electronic testing and development.
Önview Owon SPM Series Simple Source Measuring Unit User Manual
User manual for the Owon SPM Series Simple Source Measuring Unit, providing detailed instructions on safety precautions, panel operations, power supply functions, multimeter measurements, troubleshooting, and maintenance.
Önview OWON FDS Serisi Hızlı Kılavuz: Kullanım Kılavuzu ve Çalıştırma Talimatları
Get started with your OWON FDS Series oscilloscope. This quick guide covers essential setup, safety, and operational details for its oscilloscope, function generator, power supply, and multimeter features. Visit www.owon.com.hk/download for full support.
Önview Owon FDS Serisi Dijital Osiloskop Teknik Özellikleri
Owon FDS Serisi dijital osiloskopların (FDS1102 ve FDS1102A modelleri dahil) performans özellikleri, tetikleme fonksiyonları, dalga formu üretimi, güç kaynağı ve multimetre özelliklerini kapsayan ayrıntılı teknik özellikleri.
Önview OWON Digital Multimeter Quick Start Guide and Safety Information
Essential guide for OWON Digital Multimeters, detailing safety precautions, quick start instructions, Bluetooth mobile connectivity, and maintenance tips for safe and effective use.
Önview OWON Digital Multimeter OW67 User Manual and Quick Start Guide
Comprehensive user manual and quick start guide for the OWON OW67 Digital Multimeter, covering safety, operation, measurements, mobile connectivity, and maintenance.