TC Electronic JIMS 800 PREAMP Gitar Pedalı

1. Giriş

The TC Electronic JIMS 800 PREAMP is a twin-channel guitar preamp pedal designed to deliver classic, guitar-driven rock tones. Utilizing advanced TC Ampworx component-based modeling technology, this compact pedal encapsulates the sound and feel of an iconic 80s guitar amplifier. It features independent channel controls, pre/post boost functionality, and dedicated outputs for DI and headphones, offering versatile usage for practice, recording, and live performance.

2. Güvenlik Bilgileri

• Always use a regulated 9V DC power supply with a center-negative polarity and a minimum current rating of 300mA. Incorrect power supplies can damage the unit and void the warranty.
• Do not expose the pedal to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the pedal to severe impacts.
• Do not attempt to open the enclosure or modify the internal circuitry. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the pedal during operation.

3. Paket İçeriği

Your TC Electronic JIMS 800 PREAMP package should contain the following:

• JIMS 800 ÖNAMP Gitar Pedalı
• Hızlı Başlangıç ​​Kılavuzu (eğer dahilse)

Note: A power supply is not included and must be purchased separately.

4. Ürün Özellikleri

• Twin-Channel Preamp: Offers two distinct channels for versatile tonal options.
• Bağımsız Kanal Kontrolleri: Each channel features dedicated controls for precise tone shaping.
• Pre/Post Boost: Provides an added gain boost that can be applied before or after the preamp bölüm.
• Dedicated Outputs: Includes outputs for DI (Direct Injection) and headphones for flexible connectivity.
• Treble Bleed Circuit: Smooths out sharp tones for a more pleasant listening experience.
• Authentic Cab Simulation: Features precise convolution-based IR technology for a classic G12-65 4x12 cab speaker sound.
• Versatile Tonestack: Combines the iconic tone control layout of the original amp with modern versatility.
• Added Gain Power: A subtle additional gain boost on the second channel pushes your sound without compromising the original amp's feel.

5. Kontroller ve Bağlantılar

Şekil 1: Ön Panel Kontrolleri

• KAZANÇ Düğmesi: Adjusts the input gain and distortion level of the selected channel.
• HIZLANDIRMA Düğmesi: Controls the level of the independent boost function.
• SEVİYE Düğmesi: Pedalların toplam çıkış ses seviyesini ayarlar.
• BAS Düğmesi: Adjusts the low-frequency response of the tone.
• MID Düğmesi: Adjusts the mid-range frequency response of the tone.
• TİZ Düğmesi: Adjusts the high-frequency response of the tone.
• BOOST Ayak Pedalı: Activates or deactivates the boost function. An LED indicates its status.
• CHANNEL Footswitch: Switches between the two preamp channels. An LED indicates the active channel.
• TELEFONLAR Jack: 3.5mm stereo output for headphones, featuring cab simulation.

Şekil 2: Arka Panel Bağlantıları

• Jack'te: 1/4" mono input for your guitar.
• ÇIKIŞ Jack: 1/4" mono output to your amplifier veya diğer pedallar.
• DI Jack: XLR output for direct connection to a mixing desk or audio interface, with cab simulation.
• VARLIK Düğmesi: Adjusts the high-frequency contour, adding clarity or bite.
• PRE/POST Switch: Determines whether the boost is applied before (PRE) or after (POST) the preamp bölüm.
• 9V DC Girişi: Power input for a 9V DC, center-negative power supply (300mA minimum).
• USB Bağlantı Noktası: USB 2.0 Type B port for firmware updates and potential future functionalities.

6. Kurulum

1. Güç Bağlantısı: Connect a 9V DC, center-negative power supply (minimum 300mA) to the 9V DC input jack on the rear panel.
2. Gitar Bağlantısı: Connect your guitar to the 'IN' jack on the rear panel using a standard 1/4" instrument cable.
3. Çıkış Bağlantısı:
   • For connection to a guitar amplifier, connect the 'OUT' jack to your amp's input.
   • For direct recording or live sound, connect the 'DI' XLR output to a mixing console or audio interface. This output includes cab simulation.
   • For silent practice, connect headphones to the 'PHONES' 3.5mm stereo jack. This output also includes cab simulation.
4. Başlangıç ​​ayarları: Before powering on, set all knobs (GAIN, BOOST, LEVEL, BASS, MID, TREBLE, PRESENCE) to their 12 o'clock (noon) position. Ensure the PRE/POST switch is set to your desired boost placement.

7. Kullanım Talimatları

7.1 Kanal Değiştirme

Basın KANAL footswitch to toggle between the two distinct preamp channels. The corresponding LED will illuminate to indicate the active channel.

7.2 Gain and Level Adjustment

• Kullanın KAZANMAK knob to control the amount of overdrive and distortion for the selected channel. Higher settings will yield more saturated tones.
• Ayarla SEVİYE knob to set the overall output volume of the pedal. Ensure the output level is appropriate for your amplifier veya kayıt cihazı.

7.3 Tone Shaping (EQ)

The JIMS 800 PREAMP features a versatile 3-band EQ:

• BAS: Controls the low-end frequencies, adding warmth or tightness.
• ORTA: Adjusts the mid-range frequencies, affecting the presence and punch of your tone.
• TİZ: Controls the high-end frequencies, adding brightness or smoothness.
• VARLIK: (Rear Panel) Fine-tunes the very high frequencies, adding sparkle or cutting harshness.

7.4 Güçlendirme İşlevi

• Kullanın ARTIRMAK knob to set the desired amount of boost.
• Basın ARTIRMAK footswitch to engage or disengage the boost.
• The ÖN / SONRA switch on the rear panel determines where the boost is applied in the signal chain. 'PRE' applies the boost before the preampartışasing saturation. 'POST' applies the boost after the preamp, primarily increasing hacim.

7.5 Cab Simulation

The DI and PHONES outputs feature an authentic G12-65 4x12 cab simulation, providing a studio-quality speaker cabinet sound directly from the pedal. This is ideal for recording or connecting directly to a PA system without needing a physical amplifier or cabinet.

8. Bakım

• Temizlik: Use a soft, dry cloth to clean the pedal's exterior. Do not use abrasive cleaners or solvents.
• Depolamak: Uzun süre kullanılmadığı zamanlarda pedalı serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
• Donanım Yazılımı Güncellemeleri: Periodically check the TC Electronic website for any available firmware updates for your JIMS 800 PREAMP via the USB port.

9. Sorun Giderme

• Ses Yok:
  • Güç kaynağının doğru şekilde bağlandığından ve çalıştığından emin olun.
  • Check all instrument cables for proper connection and integrity.
  • LEVEL düğmesinin minimuma ayarlanmadığından emin olun.
  • If using DI or headphones, ensure the receiving device (mixer, interface, headphones) is properly connected and its volume is up.
• Poor Tone/Unwanted Noise:
  • Check your guitar's pickups and wiring.
  • Experiment with the GAIN and EQ (BASS, MID, TREBLE, PRESENCE) settings.
  • Ensure you are using a clean, regulated power supply. Unregulated or noisy power supplies can introduce hum.
  • Bağlantı hatalarını elemek için farklı kablolarla test edin.
• Boost Function Not Working:
  • Ensure the BOOST knob is turned up from minimum.
  • Check the BOOST footswitch LED to confirm it's engaged.

10. Özellikler

11. Garanti ve Destek

TC Electronic products are designed for reliability and performance. For information regarding warranty coverage, technical support, and service, please visit the official TC Electronic webSiteyi ziyaret edin veya doğrudan müşteri hizmetleriyle iletişime geçin. Satın alma belgenizi garanti talepleriniz için saklayın.

Official TC Electronic Webalan: www.tcelektronik.com