Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire

1. Ürün Bittiview

The Philips DayBrite CFI Linear SDS Selectable Strip is a versatile 2-foot LED luminaire designed for various indoor lighting applications. This fixture offers field-selectable color temperatures (3500K, 4000K, 5000K) and lumen outputs (1200, 1800, 2400 lumens), providing flexibility to meet specific lighting requirements. It features 0-10V dimming capability for precise light level control.

Figure 1: Philips DayBrite CFI Linear SDS Selectable LED Strip Luminaire. This image shows the full length of the white linear LED strip light, featuring a frosted diffuser for even light distribution and a sleek, minimalist design suitable for various indoor installations.

2. Güvenlik Bilgileri

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• UYARI: Elektrik çarpması riski. Kurulum veya bakım işlemlerinden önce sigorta veya devre kesiciden elektriği kesin.
• Installation must be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
• Do not install in wet locations or near flammable materials.
• Tedarik hacmini sağlayıntage is compatible with the luminaire's requirements (120-277V AC).
• Aydınlatma armatüründe hiçbir şekilde değişiklik yapmayın.
• LED bileşenlerine zarar vermemek için dikkatli kullanın.

3. Paket İçeriği

Paketi açtığınızda tüm bileşenlerin mevcut ve hasarsız olduğundan emin olun:

• 1 x Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire
• 1 x Kurulum Kılavuzu (bu belge)
• Mounting Hardware (e.g., screws, anchors - Pakete göre değişiklik gösterebilir.)

4. Kurulum ve Kurulum

This luminaire is designed for surface mounting. Professional installation is recommended.

1. Kurulum Alanını Hazırlayın: Ensure the mounting surface is structurally sound and can support the weight of the fixture. Turn off power at the circuit breaker before beginning installation.
2. Marka Montaj Noktaları: Use the luminaire as a template to mark the desired mounting locations on the ceiling or wall. Ensure marks are level and spaced correctly for secure attachment.
3. Montaj Donanımını Takın: Drill pilot holes at the marked locations. Insert appropriate anchors if mounting into drywall or plaster. Secure the mounting brackets (if separate) or the luminaire directly using screws.
4. Kablo Bağlantıları:
   • Connect the AC power supply wires (Line, Neutral, Ground) from the junction box to the corresponding wires on the luminaire. Follow local electrical codes for proper wiring.
   • For 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires from the luminaire to the corresponding wires on your 0-10V dimming control system. Ensure polarity is correct.
   • Tüm kablo bağlantılarını uygun kablo somunları veya konektörlerle sabitleyin.
5. Aydınlatma armatürünü sabitleyin: Once wiring is complete and connections are secure, attach the luminaire firmly to the mounting surface. Ensure no wires are pinched.
6. Gücü Geri Yükle: Turn on power at the circuit breaker. Test the luminaire for proper operation and dimming functionality.

5. Kullanım Talimatları

This luminaire features field-selectable color temperature and lumen output settings.

• Renk Sıcaklığı Seçimi: Locate the CCT (Correlated Color Temperature) selector switch on the luminaire. This switch allows you to choose between 3500K (Warm White), 4000K (Cool White), and 5000K (Daylight) settings. Ensure power is off before adjusting this switch.
• Lumen Output Selection: Locate the Lumen selector switch on the luminaire. This switch allows you to choose between 1200, 1800, and 2400 lumens. Ensure power is off before adjusting this switch.
• 0-10V Karartma: Once installed and wired to a compatible 0-10V dimmer, the light output can be adjusted smoothly from 100% down to 10% (or lower, depending on dimmer specifications) using the external dimming control.

6. Bakım

The Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire requires minimal maintenance.

• Temizlik: Temizlemeden önce elektriği kesin. Yumuşak, kuru veya hafif nemli bir bez kullanın.amp cloth to wipe the exterior surface of the luminaire. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these may damage the finish or optical components.
• LED'ler: LED'ler entegre haldedir ve değiştirilmeleri gerekmez.

7. Sorun Giderme

If you experience issues with your luminaire, refer to the following common problems and solutions:

Bu çözümleri denedikten sonra sorun devam ederse lütfen müşteri desteğiyle iletişime geçin.

8. Özellikler

9. Garanti Bilgileri

This Philips DayBrite product is covered by a manufacturer's limited warranty. Please refer to the warranty card included with your purchase or visit the official Signify webAyrıntılı garanti şartları ve koşulları için web sitemizi ziyaret edin. Satın alma belgenizi garanti talepleriniz için saklayın.

10. Müşteri Desteği

For technical assistance, product inquiries, or warranty claims, please contact Signify customer support:

• Webalan: Visit the official Signify or Philips Lighting webDestek kaynakları, SSS ve iletişim bilgileri için site.
• Telefon: Lütfen ürün ambalajında ​​veya üreticinin web sitesinde yer alan iletişim bilgilerine bakın. webalan.

When contacting support, please have your product model number (SDS21224L8CST-UNV-DIM) and proof of purchase readily available.