giriiş
The ZEBRONICS Argo Cube Form Factor Gaming Cabinet is designed to house your computer components, offering a compact and visually appealing solution for gaming setups. It features a cube form factor with tempered glass panels, pre-installed ARGB fans, and support for various cooling and connectivity options. This manual provides essential information for the proper setup, operation, and maintenance of your gaming cabinet.
Figure 1: ZEBRONICS Argo Cube Gaming Cabinet, showcasing its cube form factor and illuminated ARGB fans.
Kurulum ve Yükleme
Follow these steps for the correct installation of your components within the ZEB-Argo cabinet.
1. Anakart Kurulumu
The ZEB-Argo cabinet supports Micro ATX and ITX motherboards. Carefully align your motherboard with the standoffs inside the chassis and secure it with screws.
Figure 2: Diagram illustrating motherboard compatibility (Micro ATX, ITX) and ARGB fan sync support.
2. Soğutma Sistemi Kurulumu
The cabinet comes with three pre-installed 120mm inner glow ARGB LED cooling fans: one on the rear and two on the side. Additional 120mm cooling fans can be added at the top (2x) and bottom (2x) for enhanced airflow.
- Önceden yüklenmiş Fanlar: 1x 120mm ARGB fan (Rear), 2x 120mm ARGB fans (Side panels).
- AIO Cooler Support: The chassis supports AIO coolers, with a 120mm option on the rear and a 240mm option on the top.
Şekil 3: Üzeriview of pre-installed fans and locations for additional AIO cooler mounting.
Figure 4: Diagram detailing AIO cooler support locations (120mm rear, 240mm top).
3. Component Dimensions and Clearance
- VGA Card: Supports cards up to 330mm in length.
- CPU Soğutucu: Accommodates coolers up to 160mm in height.
- Güç Kaynağı: The power supply unit (PSU) is installed at the bottom of the chassis.
Figure 5: Visual guide to maximum supported dimensions for VGA cards, CPU coolers, and fan/AIO placements.
4. Depolama Sürücüsü Kurulumu
The ZEB-Argo cabinet provides mounting points for storage drives:
- 1x HDD (Hard Disk Drive) mounting point.
- 3x SSD (Solid State Drive) mounting points.
Şekil 6: Dahili view showing designated areas for 1x HDD and 3x SSD installations.
5. Ön Panel Bağlantıları
The front panel offers convenient access to various ports and controls:
- 1x USB 3.0 Bağlantı Noktası
- 1x USB Port (Standard)
- 1x Type-C Port
- 1x 3.5mm Microphone Port
- 1x 3.5mm Headphone Port
- LED Control Switch (for ARGB fan modes)
- Güç Düğmesi
The chassis also includes 7 expansion slots at the back panel for add-on cards.
Şekil 7: Yakın çekim view of the front panel, highlighting the Type-C, USB 3.0, standard USB, headphone/mic jacks, LED switch, and power button.
6. Kablo Yönetimi
The ZEB-Argo chassis is designed with cable management features to help organize cluttered cables, ensuring optimal airflow and a clean internal appearance. Utilize the provided routing channels and tie-down points behind the motherboard tray.
Kullanım Talimatları
Tüm bileşenler kurulduktan ve bağlandıktan sonra sisteminizi açabilirsiniz.
- Güç Açık: Press the power button located on the front panel to start your computer.
- LED Kontrolü: Use the dedicated LED control switch on the front panel to cycle through various ARGB lighting modes for the pre-installed fans.
- Anakart ARGB Senkronizasyonu: If your motherboard supports ARGB synchronization, you can connect the cabinet's ARGB lighting to your motherboard's header for unified lighting control via motherboard software. Refer to your motherboard manual for specific instructions.
Bakım
Regular maintenance helps ensure optimal performance and longevity of your gaming cabinet.
- Toz Filtreleri: The top of the chassis is fitted with magnetic dust filters. Regularly remove and clean these filters to prevent dust accumulation inside the cabinet, which can impede airflow and component cooling.
- Genel Temizlik: Use a soft, dry cloth to wipe down the exterior surfaces, including the tempered glass panels. For stubborn smudges on glass, a mild glass cleaner can be used sparingly on the cloth, not directly on the panel.
- İç Toz Giderme: Periodically use compressed air to clear dust from internal components and fan blades. Ensure the system is powered off and unplugged before performing internal cleaning.
Sorun giderme
Bu bölümde karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Fans not lighting up or dim ARGB | Loose ARGB connections; incorrect fan daisy-chaining; faulty fan. |
|
| Front panel USB/audio ports not working | Internal cables not connected to motherboard; incorrect driver. |
|
| Sistem aşırı ısınması | Poor airflow; dust accumulation; insufficient cooling. |
|
Özellikler
| Özellik | Detay |
|---|---|
| Marka | ZEBRONİK |
| Model Adı | ZEB - ARGO (BLACK) |
| Form Faktörü | Küp |
| Anakart Uyumluluğu | Micro ATX, ITX |
| Malzeme | Tempered Glass (Front & Side Panel) |
| Önceden yüklenmiş Fanlar | 3 x 120mm ARGB LED (1 Rear, 2 Side) |
| Ek Taraftar Desteği | 2 x 120mm (Top), 2 x 120mm (Bottom) |
| AIO Soğutucu Desteği | 120mm (Rear), 240mm (Top) |
| Maksimum VGA Kart Uzunluğu | 330mm |
| Maksimum CPU Soğutucu Yüksekliği | 160mm |
| PSU Montajı | Alt |
| Genişleme Yuvaları | 7 |
| Ön G / Ç Bağlantı Noktaları | 1x USB 3.0, 1x USB, 1x Type-C, 1x 3.5mm Mic, 1x 3.5mm Headphone |
| Boyutlar (UxGxY) | 29x45x54.4 cm |
| Ürün Ağırlığı | 4.3 kilo |
| Toz Filtresi | Magnetic (Top) |
Garanti ve Destek
For warranty information and customer support, please refer to the official ZEBRONICS website or contact their customer service directly. The product comes with a standard warranty as per regional regulations. Keep your purchase receipt for warranty claims.
- Üretici: Zebronics Hindistan Özel Limited Şirketi
- Üretici Adresi: 13/7, Smith Road, Royapettah CHENNAI-600002
- Garanti Politikası: Şuna bakın: ürün sayfası or official ZEBRONICS channels for detailed warranty terms.
