1. Ürün Bittiview
The SODOLA Gigabit Ethernet Media Converter is designed to convert electrical Ethernet signals to optical fiber signals, extending network reach over long distances. It supports 10/100/1000Base-Tx to 1000Base-LX conversion and includes a SingleMode Dual LC SFP module for distances up to 20 km.
Image 1.1: SODOLA Gigabit Ethernet Media Converter showing its compact design and key ports.
Resim 1.2: Üzeriview of the SODOLA Gigabit Ethernet Media Converter highlighting its SFP and RJ45 ports.
2. Paket İçeriği
Paketinizde aşağıdaki öğelerin bulunduğunu doğrulayın:
- 1 x Gigabit Ethernet Media Converter
- 1 x Power Adapter (5V-1A)
- 1 x Kullanım Kılavuzu
- 1 x SFP SingleMode Module (1.25G, 1310-nm, 20-km)
Resim 2.1: Ürün paketinde bulunan içerikler.
3. Kurulum Talimatları
Follow these steps to set up your Gigabit Ethernet Media Converter:
- Connect the SFP Module: Insert the provided SFP SingleMode module into the SFP port of the media converter. Ensure it clicks into place securely.
- Fiber optik kabloyu bağlayın: Connect a SingleMode Dual LC fiber optic cable to the SFP module. Ensure the connectors are clean and properly aligned.
- Ethernet Kablosunu Bağlayın: Connect a Cat.5e or Cat.6 UTP/STP Ethernet cable (up to 100m) from your network device (e.g., switch, router, PC) to the RJ-45 port of the media converter. The RJ-45 port supports auto-negotiation for 10/100/1000Mbps and MDI/MDI-X auto-crossover.
- Gücü bağlayın: Plug the 5V-1A power adapter into the DC 5.5*2.5mm power input port on the media converter, then plug the adapter into a power outlet.
- Bağlantıları Doğrulayın: Check the LED indicators on the converter to ensure proper operation (refer to Section 4 for LED status).
Resim 3.1: Ayrıntılı view of the Gigabit RJ45 Port, Gigabit SFP Port, LED Indicators, and Power Supply input.
Image 3.2: Typical application scenario demonstrating fiber to Ethernet conversion.
Image 3.3: Illustration of connecting the SFP module and RJ45 Ethernet cable.
4. Operating the Device and LED Indicators
The media converter operates automatically once powered on and connected. The LED indicators provide visual feedback on the device's status:
Image 4.1: Explanation of LED indicators on the media converter.
- PWR (Güç):
- Yeşil (Katı): DC Power is on.
- FDX (Tam Çift Yönlü):
- Yeşil (Katı): Full-Duplex mode is active.
- 1000M (Gigabit Speed):
- Yeşil (Katı): RJ-45 port speed is 1000Mbps.
- 100M (Fast Ethernet Speed):
- Yeşil (Katı): RJ-45 port speed is 100Mbps.
- FIBER (Fiber Port Status):
- Yeşil (Katı): Fiber port is working.
- Yeşil (Yanıp Sönüyor): Data is being transmitted/received (Transceive).
- TP (Twisted Pair/RJ45 Port Status):
- Yeşil (Katı): Ağ bağlantısı kuruldu.
- Yeşil (Yanıp Sönüyor): Data is being transmitted/received (Transceive).
5. Bakım
To ensure optimal performance and longevity of your media converter:
- Cihazı serin, kuru bir ortamda, doğrudan güneş ışığından ve ısı kaynaklarından uzakta saklayın.
- Ünite çevresinde uygun havalandırmanın olduğundan emin olun.
- Regularly inspect fiber optic connectors for dust or damage. Use appropriate fiber cleaning tools if necessary.
- Avoid bending fiber optic cables beyond their minimum bend radius.
- Use only the provided power adapter or a compatible 5V-1A DC power supply.
6. Sorun Giderme
If you encounter issues with your media converter, refer to the following common problems and solutions:
- Güç Yok (GÜÇ LED'i Kapalı):
- Güç adaptörünün dönüştürücüye ve elektrik prizine sağlam bir şekilde bağlı olup olmadığını kontrol edin.
- Elektrik prizinin çalışır durumda olduğundan emin olun.
- No Link on RJ-45 Port (TP LED Off/Not Flashing):
- Ensure the Ethernet cable is properly connected to both the converter and the network device.
- Verify the Ethernet cable is not damaged and is a Cat.5e or Cat.6 cable.
- Check the status of the connected network device (e.g., switch port, PC network adapter).
- No Link on Fiber Port (FIBER LED Off/Not Flashing):
- Ensure the SFP module is fully inserted into the converter.
- Check the fiber optic cable for proper connection, cleanliness, and damage.
- Verify the fiber optic cable type (SingleMode Dual LC) matches the SFP module.
- Ensure the remote fiber device is powered on and functioning correctly.
- Slow Speed (1000M LED Off, 100M LED On):
- Ensure the connected Ethernet device supports Gigabit speeds.
- Check the Ethernet cable for quality; a damaged or low-quality cable can limit speed.
7. Özellikler
Detailed technical specifications for the SODOLA Gigabit Ethernet Media Converter:
Resim 7.1: Ürün boyutları ve temel özelliklerin özeti.
| Özellik | Şartname |
|---|---|
| Model Numarası | SL-SG0101-SFPK2 |
| Fiber Bağlantı Noktası | SFP (1.25G, SingleMode, 1310-nm, Dual LC) |
| Fiber Mesafesi | 20 km'ye kadar |
| UTP Port | RJ-45 10/100/1000Mbps (Auto-negotiation, MDI/MDI-X) |
| UTP/STP Cable | Cat.5e or Cat.6, up to 100m |
| Veri Aktarım Hızı | 1000 Megabits Per Second (2000Mbps Full-Duplex) |
| Veri Bağlantı Protokolü | IEEE 802.3 |
| Güç Kaynağı | DC 5V-1A (5.5*2.5mm) |
| Ürün Ağırlığı | 10.5 ons (0.3 Kilogram) |
| Paket Boyutları | 6.42 x 4.72 x 1.85 inç |
| Çalışma Sıcaklığı | 0 ~ 60 °C |
8. Garanti ve Destek
The included SFP SingleMode transceiver comes with a one-year replacement warranty for any quality issues. For further assistance, technical support, or warranty claims, please contact Sodola customer service through the retailer where the product was purchased or visit the official Sodola webiletişim bilgileri için site.
