Orange Pi R6

Orange Pi 5 Plus WiFi 6 Modülü Kablosuz Kart R6 Kullanım Kılavuzu

Modeli: R6

1. Ürün Bittiview

The Orange Pi 5 Plus WiFi 6 Module Wireless Card R6 is a highly integrated wireless communication module designed for the Orange Pi 5 Plus Single Board Computer. It provides advanced Wi-Fi 6 (802.11ax) and Bluetooth 5.2 connectivity, offering high-speed data transfer rates up to 1201Mbps. This module utilizes a PCIe M.2 E-Key interface for Wi-Fi and a USB2.0 interface for Bluetooth, ensuring seamless integration and robust performance.

Orange Pi 5 Plus WiFi 6 Module R6, front view, showing model number, MAC addresses, and Realtek chip information.

Şekil 1: Ön view of the Orange Pi 5 Plus WiFi 6 Module R6, displaying its model, MAC addresses (e.g., WiFi MAC: A843A428DE3E), and Realtek RTL8852BE chip details.

2. Güvenlik Bilgileri

  • Always power off and disconnect the Orange Pi 5 Plus from its power source before installing or removing the module.
  • Handle the module by its edges to avoid touching sensitive components and to prevent electrostatic discharge (ESD) damage.
  • Ensure proper ventilation around the Orange Pi 5 Plus to prevent overheating.
  • Keep the module away from liquids and extreme temperatures.
  • Do not attempt to modify or repair the module yourself. Refer to qualified personnel for service.

3. Paket İçeriği

Paketinizde tüm öğelerin mevcut olduğundan emin olun:

  • 1 x Orange Pi 5 Plus Wireless Module R6
  • 2 x Antenna Cables (typically included for external antenna connection)

4. Kurulum Kılavuzu

Follow these steps to install the Orange Pi 5 Plus WiFi 6 Module R6 into your Orange Pi 5 Plus Single Board Computer:

  1. Hazırlık: Ensure your Orange Pi 5 Plus is powered off and disconnected from all power sources. Place it on a clean, static-free surface.
  2. Locate the M.2 E-Key Slot: Identify the M.2 E-Key slot on your Orange Pi 5 Plus board. This slot is specifically designed for Wi-Fi and Bluetooth modules.
  3. Modülü takın: Gently align the notch on the Orange Pi R6 module with the key in the M.2 E-Key slot. Insert the module at a slight angle (approximately 30 degrees) into the slot until the gold contacts are fully seated.
  4. Açılı view of the Orange Pi 5 Plus WiFi 6 Module R6, showing the M.2 E-Key connector pins.

    Şekil 2: Açısal view of the Orange Pi R6 module, illustrating its M.2 E-Key connector for proper insertion.

  5. Modülü Güvenli Hale Getirin: Once seated, gently push the module down towards the board. Secure it with a small screw (not typically included with the module, but usually provided with the Orange Pi 5 Plus board or M.2 accessories) into the standoff at the end of the module.
  6. Antenleri Bağlayın: Carefully attach the provided antenna cables to the small connectors on the module. These are typically U.FL or IPEX connectors. Ensure they snap securely into place. Route the antenna cables away from other components and connect them to external antennas if applicable.
  7. Geri view of the Orange Pi 5 Plus WiFi 6 Module R6, showing the antenna connectors.

    Şekil 3: Arka view of the Orange Pi R6 module, highlighting the antenna connection points.

  8. Güç Açma ve Sürücü Kurulumu: Reconnect power to your Orange Pi 5 Plus and boot the operating system. Most modern Linux distributions (like Ubuntu or Armbian for Orange Pi) should automatically detect the Realtek RTL8852BE-CG chip and install the necessary drivers. If not, you may need to manually install drivers or update your system's kernel. Refer to the Orange Pi official documentation or community forums for specific driver installation instructions for your chosen OS.

5. Kullanım Talimatları

5.1. Wi-Fi Bağlantısı

  1. Once your Orange Pi 5 Plus is booted, navigate to your operating system's network settings.
  2. Enable Wi-Fi if it is not already active.
  3. Mevcut ağlar listesinden istediğiniz kablosuz ağı (SSID) seçin.
  4. Enter the network password (if required) and click 'Connect'.
  5. Your Orange Pi 5 Plus should now be connected to the internet via Wi-Fi 6.

5.2. Bluetooth Eşleştirme

  1. Go to your operating system's Bluetooth settings.
  2. Ensure Bluetooth is enabled and set to 'discoverable' or 'pairing mode'.
  3. Bluetooth cihazınızı (örneğin kulaklık, klavye, fare) eşleştirme moduna getirin.
  4. On your Orange Pi 5 Plus, scan for new Bluetooth devices.
  5. Listeden cihazınızı seçin ve eşleştirme işlemini tamamlamak için ekrandaki yönergeleri izleyin.

6. Bakım

  • Keep the module and the Orange Pi 5 Plus in a clean, dust-free environment.
  • Avoid exposing the module to excessive physical shock or vibration.
  • Regularly check for and install operating system updates, which may include updated drivers for improved performance and stability.

7. Sorun Giderme

7.1. Module Not Detected

  • Fiziksel Kurulumu Kontrol Edin: Ensure the module is correctly seated in the M.2 E-Key slot and secured with a screw.
  • Verify M.2 Slot Functionality: Confirm that the M.2 E-Key slot on your Orange Pi 5 Plus is enabled and functioning correctly (refer to Orange Pi documentation).
  • Sürücü Sorunları: Ensure the correct drivers for the Realtek RTL8852BE-CG chip are installed for your operating system.

7.2. Wi-Fi veya Bluetooth Bağlantısı Yok

  • Anten Bağlantısı: Double-check that the antenna cables are securely connected to the module and any external antennas. Loose connections can severely impact performance.
  • Software Enablement: Ensure Wi-Fi and Bluetooth are enabled in your operating system's settings.
  • Parazit yapmak: Move the Orange Pi 5 Plus away from potential sources of interference (e.g., microwaves, cordless phones).

7.3. Yavaş Wi-Fi Hızları

  • Yönlendirici Yakınlığı: Ensure the Orange Pi 5 Plus is within a reasonable range of your Wi-Fi router.
  • Yönlendirici Ayarları: Verify your router supports Wi-Fi 6 (802.11ax) and is configured for optimal performance.
  • Kanal Girişimi: Use a Wi-Fi analyzer tool to check for crowded Wi-Fi channels in your area and adjust your router's channel if necessary.

8. Teknik Özellikler

Orange Pi 5 Plus WiFi 6 Module R6 with key specifications listed, including Realtek RTL8852BE-CG CPU, Multi-user MIMO, Max 1201 Mbps, Wi-Fi6+BT5.2, Wi-Fi: PCI-E, Bluetooth: USB2.0, and WiFi MAC A843A428DE3E.

Figure 4: Orange Pi R6 module highlighting its core specifications and features.

ParametreDeğer
Major ChipRealtek RTL8852BE-CG
kablosuz standardıIEEE802.11a/b/g/n/ac/ax (Wi-Fi 6)
Bluetooth StandartBT V2.1+EDR/4.2/5.2
Veri Aktarım Hızı (Maks)1201Mbps
Frekans Bandı2.4~2.4835 GHz, 5.0~5.8 GHz
Interface (Wi-Fi)PCI-E (M.2 E-Key)
Interface (Bluetooth)USB2.0
Çalışma Sıcaklığı10~+70°C ambient temperature
Depolama Sıcaklığı40~+85°C ambient temperature
Boyutlar (UxGxY)22 mm x 30 mm x 2.33 mm (0.87 x 1.18 x 0.09 inç)
Ürün Ağırlığı0.634 ons
Uyumlu CihazlarOrange Pi 5 Plus

9. Garanti Bilgileri

This Orange Pi product is covered by a limited manufacturer's warranty. Please refer to the official Orange Pi website or your purchase documentation for specific warranty terms and conditions. Typically, the warranty covers defects in materials and workmanship under normal use.

10. Destek ve İletişim

For technical support, driver downloads, or further assistance with your Orange Pi 5 Plus WiFi 6 Module R6, please visit the official Orange Pi webalan:

  • Resmi Webalan: www.orange-pi.com
  • Topluluk Forumları: Engage with other users and find solutions on the Orange Pi community forums.
  • E-posta Desteği: Contact Orange Pi customer service directly for specific inquiries.

Always ensure you have your product model (R6) and any relevant purchase information ready when contacting support.

İlgili Belgeler - R6

Önview Orange Pi 4A Kullanım Kılavuzu - Kapsamlı Kılavuz
Orange Pi 4A geliştirme kartını bu kapsamlı kullanıcı kılavuzuyla keşfedin. Shenzhen Xunlong Software Co., Ltd.'den donanım özellikleri, işletim sistemi kurulumu, yazılım geliştirme ve daha fazlası hakkında bilgi edinin.
Önview Orange Pi 4B Kullanım Kılavuzu - Shenzhen Xunlong Software Co., Ltd.
Orange Pi 4B tek kartlı bilgisayarın donanım özellikleri, kurulumu, Android ve Linux sistem kullanımı, yazılım yükleme ve geliştirme ortamı kurulumunu ayrıntılı olarak açıklayan kapsamlı kullanıcı kılavuzu.
Önview Orange Pi 6 Plus Android Kullanım Kılavuzu
Orange Pi 6 Plus geliştirme kartına dair kapsamlı bir kılavuz; 12 çekirdekli ARMv9 işlemcisi, Android 14 sistemi, donanım özellikleri ve yapay zeka, uç bilişim ve IoT projeleri için geniş arayüzleri ayrıntılı olarak açıklıyor.
Önview Orange Pi 5B 用户手册:全面指南
Orange Pi 5B 用户手册提供了关于这款强大的单板计算机的详细信息,包括硬件规格、操作系统安装(Linux、Android)、开发板使用介绍以及各种接口和功能的测试指南。
Önview Orange Pi 5 Plus Kullanım Kılavuzu
Orange Pi 5 Plus geliştirme kartı için donanım özelliklerini, işletim sistemi kurulumunu (Linux, Android, OpenWRT) ve çeşitli özellikler ve arayüzler için kullanım kılavuzlarını ayrıntılı olarak açıklayan kapsamlı kullanıcı kılavuzu.
Önview Orange Pi Zero 3 Kullanım Kılavuzu
Açık kaynaklı tek kartlı bir bilgisayar olan Orange Pi Zero 3 için kapsamlı bir kullanıcı kılavuzu. Donanım özellikleri, kurulumu ve Linux ve Android işletim sistemleriyle kullanımı hakkında bilgi edinin; üreticiler, geliştiriciler ve amatörler için idealdir.