Ving 24 inç Otomatik DTF Toz Çalkalayıcı ve Kurutucu Kullanım Kılavuzu

1. Giriş

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of the Ving 24-inch Automatic DTF Powder Shaker and Dryer. This unit is designed to automate the direct-to-film (DTF) transfer printing process by evenly spreading and melting adhesive powder onto printed images, streamlining production for T-shirt and other textile applications.

Makineyi doğru şekilde kullanmak ve hasar veya yaralanmaları önlemek için lütfen çalıştırmadan önce bu kılavuzu dikkatlice okuyun. Bu kılavuzu ileride başvurmak üzere saklayın.

2. Güvenlik Bilgileri

Her zaman aşağıdaki güvenlik önlemlerine uyun:

• Makinenin sağlam ve düz bir yüzeye yerleştirildiğinden emin olun.
• Makineyi doğru voltaj değerine sahip topraklı bir elektrik prizine bağlayın.tage.
• Çalışma sırasında ellerinizi ve bol giysilerinizi hareketli parçalardan uzak tutun.
• Makineyi d'de çalıştırmayın.amp veya ıslak koşullar.
• Turn off and unplug the machine before performing any maintenance or cleaning.
• Use appropriate personal protective equipment (PPE) such as gloves and masks when handling DTF powder.
• Ensure adequate ventilation in the work area to dissipate fumes from the drying process.

3. Ürün Bittiview

The Ving 24-inch Automatic DTF Powder Shaker and Dryer integrates several functions to automate the DTF transfer process:

• Vacuum Absorption Conveying Platform: Secures the printing material to prevent bulging and ensure consistent powder application.
• Automatic Powder Dispenser: Evenly spreads adhesive powder onto the printed film.
• Paddle System: Removes excess powder from the film.
• Infrared Drying and Heating Tunnel: Features 4 bulbs for efficient melting and curing of the adhesive powder, enhancing color reproduction.
• Warming Inlet Platform: Prepares the film for optimal powder adhesion.
• Touch Screen Display Controller: Provides a user-friendly interface for machine control.
• Roll-up Mechanism: Collects the finished film.

Şekil 3.1: Ön view of the Ving 24-inch Automatic DTF Powder Shaker and Dryer, showing the overall machine structure.

Şekil 3.2: Yan view of the machine, highlighting the integrated touch screen control panel.

Figure 3.3: The DTF Shaker and Dryer integrated into a typical printing workshop environment.

4. Kurulum

1. Paketin açılması: Makineyi ambalajından dikkatlice çıkarın. Nakliye sırasında oluşabilecek herhangi bir hasarı kontrol edin. Herhangi bir hasarı derhal kargo şirketine bildirin.
2. Atama: Position the machine on a sturdy, level surface capable of supporting its weight. Ensure there is sufficient space around the machine for operation, maintenance, and ventilation.
3. Güç Bağlantısı: Connect the power cord to the machine and then to a grounded electrical outlet that meets the specified voltage gereksinimleri.
4. Powder Loading: Open the powder dispenser compartment and carefully pour the DTF adhesive powder into the designated reservoir. Ensure the powder is dry and free of clumps.
5. Film Yükleniyor: Load the DTF film roll onto the input spindle, ensuring it feeds smoothly onto the vacuum absorption conveying platform.
6. İlk Güç Açma: Turn on the main power switch. The touch screen display should illuminate.

5. Kullanım Talimatları

Follow these steps for the DTF transfer printing process using the Ving Automatic DTF Powder Shaker and Dryer:

1. Prepare Your Design: Create or select your design using appropriate graphic software.
2. Print onto DTF Film: Print your design onto the DTF film using a compatible DTF printer. Ensure the print is wet when it enters the shaker unit.
3. Automatic Powder Shaking: As the wet printed film enters the shaker unit, the automatic powder dispenser will apply an even layer of adhesive powder. The paddle system will then remove excess powder.
4. Baking/Curing: The film with the applied powder will then pass through the infrared drying and heating tunnel. The heat will melt and cure the adhesive powder onto the ink.
5. Heat Press Application: Once the film exits the dryer and cools, it is ready for heat pressing onto your desired garment or substrate.
6. Bitirme: Peel the transfer film from the garment after heat pressing according to the film manufacturer's instructions.

Figure 5.1: Visual representation of the DTF printing workflow, from design creation to final product.

Şekil 5.2: Dahili view of the drying tunnel, illustrating the infrared heating elements and the conveyor belt system.

Şekil 5.3: View of the powder collection and distribution system within the shaker unit.

6. Bakım

Regular maintenance ensures optimal performance and longevity of your DTF Powder Shaker and Dryer.

• Günlük Temizlik: After each use, clean any residual powder from the conveying platform, powder dispenser, and paddle system. Use a soft, dry cloth or brush.
• Powder Management: DTF powder shakers typically do not have an automatic powder recycling function. Regularly inspect and remove any excess powder to prevent moisture absorption, which can lead to clumping and poor application. Store unused powder in a dry, sealed container.
• Conveyor Belt Inspection: Periodically check the conveyor belt for wear, tears, or misalignment. Clean the belt to remove any adhesive residue.
• Isıtma Elemanı Kontrolü: Ensure the infrared heating bulbs are clean and functioning correctly. Replace any burnt-out bulbs as needed.
• Genel muayene: Regularly inspect all electrical connections and moving parts for any signs of wear or damage.

Önemli Not:

This DTF powder shaker model does not feature an automatic powder recycling function. Manual removal and proper storage of excess powder are essential to prevent moisture absorption and maintain powder quality.

7. Sorun Giderme

8. Özellikler

• Modeli: B0CFQNQ5FN
• Marka: Ving
• Makine Tipi: Automatic DTF Powder Shaker and Dryer
• Maximum Film Width: Approximately 24 inches (based on product title)
• Kurutma Yöntemi: Infrared Heating (4 bulbs)
• Kontrol Arayüzü: Dokunmatik Ekran
• Conveying System: Vacuum Absorption Platform
• Applicable Mediums: Nylon, Chemical Fiber, Cotton, Leather, Swimsuit, Diving Suit, PVC, EVA, etc.
• Üretici: Sign-in-China
• İlk Mevcut Tarih: 15 Ağustos 2023

Şekil 8.1: Ör.amples of various materials and finished products that can be customized using DTF transfer printing, including canvas bags, hats, pillows, T-shirts, hoodies, pants, socks, and masks.

9. Garanti ve Destek

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your vendor. Please have your model number (B0CFQNQ5FN) and date of purchase ready when contacting support.