Sena 10S Motosiklet Bluetooth Kulaklık İletişim Sistemi Kullanım Kılavuzu

1. Ürün Bittiview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Temel Özellikler:

• Geniş uyumluluk için Bluetooth 4.1 ve Evrensel İnterkom.
• Üstün ses kalitesi için gelişmiş gürültü kontrolü ile kristal netliğinde HD ses.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

Şekil 1.1: Ön view of the Sena 10S Motorcycle Bluetooth Headset.

2. Paket İçeriği

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Hoparlör Seti
• Boom Mikrofonu
• Kablolu Mikrofon
• Montaj Clamp Kit
• USB Güç ve Veri Kablosu
• Ses kablosu
• Hoparlörler için Velcro Pedler
• Mikrofon Süngerleri

Figure 2.1: All components included in the Sena 10S package.

3. Kurulum ve Kurulum

3.1 Cihazı Şarj Etme

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

Şekil 3.1: Yan view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. CL'nin arkasındaki vidaları gevşetinamp birim.
2. Cl'yi kaydırınamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Tighten the screws to secure the clamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Kullanım Talimatları

4.1 Güç Açma/Kapatma

• Güç Açık: Telefon Düğmesini ve Jog Dial'ı 1 saniye basılı tutun.
• Kapat: Telefon düğmesine ve döner kadran düğmesine aynı anda dokunun.

4.2 Ses Kontrolü

Ses seviyesini artırmak için Jog Dial'ı saat yönünde, azaltmak için ise saat yönünün tersine çevirin.

4.3 Bluetooth Eşleştirme (Akıllı Telefon)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 İnterkom İletişimi

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• İnterkom Başlatma/Bitiş: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Müziği Oynat/Duraklat: Jog Dial'ı 1 saniye basılı tutun.
• Çağrıyı Cevapla/Sonlandır: Telefon Düğmesine dokunun.
• Sesli arama: Telefon Düğmesini 3 saniye basılı tutun.

5. Bakım ve Özen

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Cihazınızı kuru tutun. Nem, iç devrelere zarar verebilir.
• Cihazı temizlemek için sert kimyasallar, temizleme solventleri veya güçlü deterjanlar kullanmayın.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Cihazı kullanılmadığında serin ve kuru bir yerde saklayın.
• Pil sağlığını korumak için, kullanmasanız bile pili düzenli olarak şarj edin.

6. Sorun Giderme

If you encounter issues with your Sena 10S, try the following steps:

• Güç Yok: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Ses Yok/Düşük Ses: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• İnterkom Bağlanmıyor: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Bluetooth Bağlantısının Kesilmesi: Ensure your paired device is within range. Try re-pairing the device.
• Cihazı Sıfırlama: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Teknik Özellikler

8. Resmi Ürün Videosu

9. Garanti ve Destek

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.