Dirt Devil Multi-Surface Rewind+ Upright Bagless Vacuum Cleaner

1. Montaj ve İlk Kurulum

Before operating your Dirt Devil Multi-Surface Rewind+ vacuum cleaner, ensure all components are correctly assembled. Refer to the 'What's in the Box' diagram to identify all parts.

Şekil 1: Dahil Edilen Bileşenler

1. Kol Montajı: Üst tutamağı, yerine güvenli bir şekilde oturana kadar ana vakum gövdesine takın.
2. Hortum bağlantısı: Connect the flexible hose to the designated port on the vacuum body. Ensure a tight fit to maintain suction.
3. Alet Depolama: Attach the included cleaning tools (Pet Upholstery tool, Turbo tool, 2-in-1 Dusting Brush and Crevice tool) to the onboard storage clips for easy access.

Figure 2: Assembled Vacuum with Tools

2. Kullanım Talimatları

2.1 Açma/Kapatma

Plug the power cord into a suitable electrical outlet. To turn the vacuum on, step on the power pedal located near the base. Step on it again to turn the vacuum off.

2.2 Yüzeylerin Temizlenmesi

The Multi-Surface Rewind+ is designed for effective cleaning on both carpets and hard floors. The PowerPass Technology helps prevent dust and dirt from scattering on hard surfaces.

Figure 3: Multi-Surface Cleaning

Figure 4: Debris Containment

2.3 Ekleri Kullanma

The removable wand and Click Lock tool kit allow for versatile cleaning. Detach the wand and attach the desired tool for above-floor cleaning, upholstery, or tight spaces.

• Pet Döşeme Aracı: Ideal for removing pet hair from furniture and stairs.
• Turbo Aracı: Provides concentrated suction for stubborn dirt and debris.
• 2-in-1 Dusting Brush and Crevice Tool: Use the brush for dusting delicate surfaces and the crevice tool for narrow gaps.

Figure 5: Above-Floor Cleaning

Figure 6: Pet Hair Cleaning

2.4 Kablo Yönetimi

The vacuum features a one-touch cord rewind system. To retract the power cord, gently press the cord rewind pedal located on the side of the vacuum.

Figure 7: One-Touch Cord Rewind

3. Bakım

3.1 Kir Kabının Boşaltılması

For optimal performance, empty the dirt cup regularly, especially when debris reaches the 'Max Fill' line. The large, easy-release dirt cup features a one-touch button for convenient emptying.

1. Elektrikli süpürgenin fişinin çekildiğinden emin olun.
2. Press the dirt cup release button to detach the dirt cup from the vacuum.
3. Toprak toplama kabını çöp kutusunun üzerine yerleştirin.
4. Press the one-touch button on the bottom of the dirt cup to open the lid and release debris.
5. Close the lid and reattach the dirt cup to the vacuum until it clicks into place.

Figure 8: Emptying the Dirt Cup

3.2 Filtre Bakımı

The vacuum features extended life filtration with a washable filter. Regularly check and clean the filter to maintain suction power and reduce dust particles released into the air.

1. Elektrikli süpürgenin fişini çekin ve kir kabını çıkarın.
2. Locate and remove the filter assembly from the dirt cup.
3. Tap the filter over a trash can to remove loose dirt.
4. Rinse the filter under running water until the water runs clear. Do not use detergent.
5. Allow the filter to air dry completely for at least 24 hours before reinserting it into the vacuum. Do not operate the vacuum with a wet filter.

3.3 Brush Roll Cleaning

Periodically inspect the brush roll for tangled hair or debris. Unplug the vacuum before attempting to clean the brush roll. Use scissors to carefully cut away any tangled hair or threads.

4. Sorun Giderme

Elektrikli süpürgenizle ilgili sorunlarla karşılaşırsanız, aşağıdaki yaygın sorunlara ve çözümlere bakın:

If the problem persists after attempting these solutions, please contact Dirt Devil customer support.

5. Ürün Özellikleri

6. Garanti ve Destek

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Dirt Devil website. For additional support, parts, or service, you may also visit the Dirt Devil Store on Amazon.