Brookstone Electric Wine Opener and Foil Cutter User Manual

1. Giriş

This manual provides instructions for the safe and efficient use of your Brookstone Electric Wine Opener and Foil Cutter. This device is designed for effortless removal of corks from wine bottles, suitable for both natural and synthetic corks. Please read all instructions carefully before use.

2. Ürün Bileşenleri

• Electric Wine Opener Unit
• Foil Cutter / Stand

Image: The Brookstone Electric Wine Opener unit with its accompanying foil cutter and stand.

3. Kurulum

3.1 Pil Kurulumu

The Brookstone Electric Wine Opener requires 4 AA batteries for operation (batteries are not included). To install the batteries:

1. Locate the battery compartment cover on the back of the wine opener unit.
2. Kapağı kaydırarak çıkarın.
3. Bölmenin içinde gösterildiği gibi kutupların (+/-) doğru olmasına dikkat ederek 4 adet AA pil takın.
4. Pil bölmesi kapağını yerine tam oturana kadar kapatın.

Image: The base of the electric wine opener showing the battery compartment and a visual representation of 4 AA batteries.

4. Kullanım Talimatları

4.1 Removing the Foil Seal

Before opening the wine bottle, the foil seal must be removed.

1. Place the foil cutter on top of the wine bottle, gripping it firmly.
2. Squeeze the sides of the foil cutter and rotate it around the bottle neck to cut the foil.
3. Remove the foil cutter and discard the foil.

Image: The foil cutter, which also serves as a stand for the wine opener, shown next to a wine bottle.

4.2 Opening the Wine Bottle

With the foil seal removed, you can now open the bottle.

1. Place the electric wine opener vertically on top of the wine bottle, ensuring it is centered over the cork.
2. Hold the bottle firmly with one hand and the opener with the other.
3. Press and hold the 'Down' button. The corkscrew will automatically rotate to penetrate the cork and pull it out of the bottle.
4. The opener will stop automatically once the cork is fully extracted. Lift the opener away from the bottle.

4.3 Releasing the Cork

To release the cork from the opener:

1. Hold the wine opener away from the bottle.
2. Press and hold the 'Up' button. The corkscrew will rotate in the opposite direction, releasing the cork.
3. The cork will detach from the opener.

Image: A visual guide demonstrating the steps for removing the foil, placing the opener, pressing the 'Down' button to extract the cork, and pressing the 'Up' button to release it.

5. Bakım

5.1 Temizlik

Wipe the exterior of the wine opener and foil cutter with a soft, damp cloth. Do not immerse the unit in water or other liquids. Do not use abrasive cleaners.

5.2 Pil Değişimi

When the opener's performance diminishes, replace all 4 AA batteries with new ones. Refer to Section 3.1 for battery installation instructions.

6. Sorun Giderme

• Opener does not work: Pillerin doğru takıldığından ve bitmemiş olduğundan emin olun. Gerekirse pilleri değiştirin.
• Cork does not come out: Ensure the opener is centered on the bottle and held firmly. The corkscrew may not have fully engaged the cork. Try again, applying gentle downward pressure.
• Cork breaks: This can occur with older or fragile corks, or if the opener is not perfectly centered. Carefully remove any remaining cork pieces from the bottle.
• Batteries drain quickly: Ensure the unit is turned off when not in use. If the issue persists, consider using high-quality alkaline batteries.

7. Özellikler

8. Garanti ve Destek

Garanti bilgileri ve müşteri desteği için lütfen ürününüzle birlikte verilen belgelere bakın veya resmi Brookstone sitesini ziyaret edin. webalan. Ayrıca şurayı da ziyaret edebilirsiniz: Amazon'daki Brookstone Mağazası Daha fazla ürün detayı için.