OSRAM Base Classic A FIL 40 LED Bulb E27 Instruction Manual

1. Ürün Bittiview

The OSRAM Base Classic A FIL 40 LED Bulb is a modern, energy-efficient lighting solution designed for general illumination in household and interior applications. This LED bulb provides a warm white light (2700 Kelvin) with a brightness of 470 lumens, equivalent to a traditional 40-watt incandescent bulb, while consuming only 4 watts of power. It features an E27 screw base for easy installation and a long operational life of up to 10,000 hours.

Temel özellikler şunlardır:

• Pleasant Light: Delivers good light quality and instant 100% light without warm-up time.
• Sağlam Tasarım: Resistant to shocks and vibrations due to advanced LED technology.
• Uzun Hizmet Ömrü: 10,000 saate kadar uzatılmış çalışma ömrü sunar.
• Enerji Tasarrufu: Very low energy consumption, making it highly efficient.
• Optimum Sıcaklık: Generates lower heat compared to standard incandescent bulbs.

Figure 1: OSRAM Base Classic A FIL 40 LED Bulb, showcasing its classic shape and E27 base.

2. Güvenlik Bilgileri

• Elektriksel Güvenlik: Always ensure the power supply is switched off before installing, removing, or cleaning the bulb to prevent electric shock.
• Cilttage Uyumluluk: This bulb is designed for 220-240 Volts. Ensure your fixture's voltage bu gereksinimi karşılıyor.
• Dimmer Uyumluluğu: Bu ürün not suitable for use with dimmers. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
• Kapalı Alan Kullanımı: Primarily for indoor use. If used outdoors, it must be installed in a suitable, enclosed outdoor fixture to protect it from elements.
• Isı Üretimi: While LED bulbs generate less heat than incandescent bulbs, they still produce some heat. Ensure adequate ventilation around the bulb.
• İmha etmek: Dispose of used bulbs according to local regulations for electronic waste. Do not dispose of with general household waste.

3. Kurulum ve Kurulum

Follow these steps to safely install your OSRAM LED bulb:

1. Kapat: Before beginning, ensure the power supply to the light fixture is completely switched off at the main switch or circuit breaker.
2. Eski Ampulü Çıkarın: If replacing an existing bulb, allow it to cool down completely before carefully unscrewing it counter-clockwise from the E27 socket.
3. Soketi inceleyin: Check the E27 socket for any damage or debris. Ensure it is clean and dry.
4. Yeni Ampulü Takın: Gently screw the OSRAM LED bulb clockwise into the E27 socket until it is finger-tight. Do not overtighten.
5. Gücü Geri Yükle: Once the bulb is securely installed, restore power to the light fixture.
6. Test: Ampulün doğru çalışıp çalışmadığını doğrulamak için ışık anahtarını açın.

Figure 2: Close-up of the OSRAM LED bulb, highlighting the E27 screw base for installation.

4. Operasyon

Operating the OSRAM Base Classic A FIL 40 LED Bulb is straightforward:

• Aç / kapa: Ampulü açıp kapatmak için aydınlatma armatürünüze bağlı standart duvar anahtarını kullanın.
• Anında Işık: The LED bulb provides instant 100% light output immediately upon switching on, with no warm-up time required.
• Karartılamaz: As noted in the safety section, this bulb is not dimmable. It will operate at full brightness when switched on.

5. Bakım

The OSRAM LED bulb requires minimal maintenance:

• Temizlik: Temizlemeden önce elektriğin kapalı olduğundan ve ampulün soğuduğundan emin olun. Ampulü yumuşak, kuru bir bezle nazikçe silin. Sıvı temizleyiciler veya aşındırıcı malzemeler kullanmayın.
• Yenisiyle değiştirme: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the installation steps in Section 3.
• Kullanıcı Tarafından Bakımı Yapılabilecek Parça Yok: The bulb contains no user-serviceable parts. Do not attempt to open or repair the bulb.

6. Sorun Giderme

If you encounter issues with your OSRAM LED bulb, refer to the following common troubleshooting steps:

• Ampul Yanmıyor:
  • Ensure the power supply to the fixture is on.
  • Check that the bulb is screwed in securely into the E27 socket.
  • Test the bulb in another working fixture to rule out a faulty fixture.
  • If the bulb still does not light up, it may be faulty and require replacement.
• Titreme veya Kararma:
  • Confirm that the bulb is not connected to a dimmer switch, as this bulb is not dimmable.
  • Aydınlatma armatüründe veya kablolarda gevşek bağlantı olup olmadığını kontrol edin.
  • Ses seviyesini garantileyintage supply is stable and within the bulb's specified range (220-240V).
• Alışılmadık Gürültü:
  • LED bulbs are generally silent. If you hear buzzing, ensure the bulb is not on a dimmer circuit.
  • Tesisatta gevşek bağlantılar olup olmadığını kontrol edin.

7. Özellikler

Figure 3: Technical drawing illustrating the dimensions of the OSRAM LED bulb. The 'd' indicates diameter and the vertical line indicates height.

Figure 4: EU Energy Label for the LEDVANCE AC32396 (OSRAM) LED bulb, indicating an energy efficiency class of E and consumption of 4 kWh/1000h. For more details, visit the official EPREL database: EPREL Veritabanı Bağlantısı.

8. Garanti ve Destek

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official OSRAM webSite. Satın alma belgenizi garanti talepleriniz için saklayın.