Okin JLDQ-11 ve JLDQ.11.156.333A Elektrikli Yatar Koltuk Motoru Kullanım Kılavuzu

1. Giriş

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Okin Model JLDQ-11 & JLDQ.11.156.333A Power Recliner Motor. This electric actuator is designed as a replacement part for various power recliners and lift chairs. Please read this manual thoroughly before proceeding with installation or use to ensure proper function and safety.

2. Güvenlik Bilgileri

Adherence to the following safety guidelines is crucial to prevent injury and damage to the product.

• Always unplug the power supply before handling the motor. This prevents accidental activation and electrical hazards.
• Be cautious of moving parts when installing or replacing the motor. Keep hands and loose clothing clear.
• Do not exceed the maximum load capacity of 750N push/pull force. Overloading can damage the motor and lead to failure.
• Ensure all connections are secure and correctly wired before restoring power.
• Bu ürün yalnızca iç mekanda kullanıma yöneliktir.

3. Ürün Bittiview

The Okin JLDQ.11.156.333A is an original Okin JLDQ series motor designed for power recliners. It features a robust design for reliable performance.

Temel Özellikler:

• Constructed with 1 motor and 2 connectors.
• Görünüm: Siyah (PA) ve Gümüş Beyaz (Alüminyum).
• Stroke: 333 mm, designed to move with a slide block.
• Yük Kapasitesi: İtme kuvveti: 750 N, Çekme kuvveti: 750 N.
• Çalışma Frekansı: 1 dk açık / 8 dk kapalı.
• Minimum Montaj Boyutu (kısaltılmış): 156 mm.
• Maksimum Montaj Boyutu: 489 mm.

Resim 3.1: Yukarıdan aşağıya view of the Okin JLDQ.11.156.333A Power Recliner Motor, showing its linear actuator design.

Resim 3.2: Açısal view of the Okin JLDQ.11.156.333A motor, highlighting its compact design.

Motor Identification:

The motor's model number is typically located on a label on the motor housing. Verify this matches your existing motor or the required replacement model.

Image 3.3: Close-up of the motor label, clearly showing the model number JLDQ.11.156.333A and serial number QPO01348 00001.

Bağlayıcı Ayrıntıları:

The actuator motor set includes two types of connectors:

• A 5-pin inside-the-motor round plug for the switch hand control.
• A 2-pin square plug for the power supply.

Image 3.4: Illustration of the 5-pin round plug for hand control and the 2-pin square plug for power supply.

4. Teknik Özellikler

5. Uyumluluk ve Uygulama

This Okin JLDQ.11.156.333A motor is specifically designed to replace the original Okin JLDQ.11.156.333A model. It can also serve as a replacement for JLDQ.11.156.333 and JLDQ.11.156.333D series motors.

Önemli: Different actuator/motors may not be compatible with all recliner frames. The frame has specific requirements for the actuator's minimum installation dimension, stroke, and plug types. Always verify your existing motor's brand, model, stroke, and connector types against the specifications provided in this manual before purchasing ve kurulum.

6. Kurulum Kılavuzu

Installation of the Okin recliner motor is generally straightforward for individuals with basic mechanical aptitude. However, if you are unsure, it is recommended to seek professional assistance.

Gerekli Araçlar:

• Lokma takımı
• Altıgen anahtarlar (Allen anahtarları)
• Pliers (optional, for cable management)

Kurulum Adımları:

1. Gücü Kesin: Ensure the recliner is completely unplugged from the wall outlet.
2. Position Recliner: Carefully turn the recliner over or tilt it back to access the motor assembly.
3. Eski Motoru Çıkarın: Disconnect the power supply and hand control cables from the old motor. Note their positions for re-connection.
4. Eski Motoru Çıkarın: Using appropriate tools, unbolt the old motor from the recliner frame. Retain all existing bolts, nuts, and washers as the new unit typically does not include mounting hardware.
5. Yeni Motoru Takın: Position the new Okin JLDQ.11.156.333A motor in the same location as the old one. Secure it to the recliner frame using the retained hardware. Ensure it is firmly attached.
6. Kabloları Bağlayın: Connect the 5-pin round plug from the hand control to the corresponding port on the motor. Connect the 2-pin square plug from the power supply to its designated port. Ensure connections are snug.
7. Test İşlevselliği: Carefully return the recliner to its upright position. Plug the recliner back into a power outlet. Test the hand control to ensure the motor operates smoothly through its full range of motion.
8. Son Kontrol: Inspect all connections and mounting points to ensure everything is secure before regular use.

7. Operasyon

Once installed and connected, the Okin JLDQ.11.156.333A power recliner motor operates via the recliner's hand control. Pressing the appropriate buttons on the hand control will extend or retract the linear actuator, moving the recliner mechanism.

• Ensure the recliner is plugged into a functional power outlet.
• Use the hand control buttons to adjust the recliner to your desired position.
• Avoid continuous operation for more than 1 minute to prevent overheating. Allow an 8-minute rest period after 1 minute of continuous use.

8. Bakım ve Özen

Düzenli bakım, Okin uzanma koltuğu motorunuzun uzun ömürlü ve sorunsuz çalışmasını sağlamaya yardımcı olur.

• Temizlik: Wipe clean the motor and surrounding areas with a dry or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the motor housing.
• Denetleme: Periodically check all electrical connections for looseness or damage. Inspect the motor's mounting bolts to ensure they remain tight.
• Yağlama: The motor is factory-lubricated and generally does not require additional lubrication. If you notice unusual friction or noise, consult a professional.
• Güç Kablosu: Ensure the power cord is not pinched, cut, or damaged. Replace if necessary.

9. Yaygın Sorunların Giderilmesi

Eğer uzanma koltuğunuzun motoru beklendiği gibi çalışmıyorsa, aşağıdaki sorun giderme adımlarını izleyin:

1. Güç Yok:
   • Check if the recliner is securely plugged into a working electrical outlet.
   • Verify the power supply unit (transformer) is receiving power and its indicator light (if present) is on.
   • Güç kablosunu gözle görülür bir hasar açısından inceleyin.
2. Motor Not Responding to Hand Control:
   • First, troubleshoot the hand control switch. Ensure its cable is securely connected to the motor.
   • If possible, test the hand control with a known working motor or test the motor with a known working hand control to isolate the issue.
   • Check the 5-pin round plug connection for any looseness or damage.
3. Motor Ses Çıkarıyor Ama Hareket Etmiyor:
   • Ensure there are no obstructions preventing the recliner mechanism from moving.
   • Check if the motor's mounting bolts are too tight, causing binding.
   • Verify the motor's stroke is not fully extended or retracted and hitting a limit.
4. Aralıklı operasyon:
   • Check all connections for intermittent contact.
   • Ensure the motor is not overheating due to continuous use (refer to operation frequency).

Bu adımlar sorunu çözmezse, daha fazla yardım için müşteri desteğiyle iletişime geçin.

10. Garanti ve Müşteri Desteği

Garanti Bilgileri:

This Okin recliner motor is covered by a manufacturer's warranty. Please refer to the product packaging or contact the seller for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.

Müşteri Desteği:

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or the manufacturer directly. Provide your product model number (JLDQ.11.156.333A) and serial number (if available) when seeking support.

You can visit the Okin store for more information: Amazon'da Okin Mağazası