1. Giriş
Thank you for choosing the Scheppach HC06 6L 8 Bar Air Compressor. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new air compressor. Please read this manual thoroughly before initial use and keep it for future reference. This portable, oil-free compressor is designed for various tasks, including inflating, powering pneumatic tools, and operating spray painting equipment.
2. Güvenlik Talimatları
Yangın, elektrik çarpması ve kişisel yaralanma riskini azaltmak için her zaman temel güvenlik önlemlerine uyun. Bu talimatlara uyulmaması ciddi yaralanmalara veya maddi hasara yol açabilir.
Genel Güvenlik
- Tüm talimatları okuyunuz: Cihazın kontrollerini ve doğru kullanımını iyice öğrenin.
- Elektriksel Güvenlik: Güç kaynağının ses seviyesiyle eşleştiğinden emin oluntage specified on the compressor. Use a grounded outlet and avoid using extension cords unless absolutely necessary and rated for the compressor's power requirements.
- Çalışma Ortamı: Operate the compressor in a well-ventilated area. Do not use in damp veya ıslak koşullarda veya yanıcı sıvıların veya gazların yakınında.
- Kişisel Koruyucu Donanım (KKD): Always wear safety glasses or goggles. Hearing protection is recommended due to the noise level (97 dB).
- Çocuklar ve Çevredekiler: Çocukları ve yetkisiz kişileri çalışma alanından uzak tutun.
- Basınç Güvenliği: Never exceed the maximum operating pressure of the compressor or the tool being used. Do not direct compressed air at people or animals.
- Bakım: Herhangi bir bakım veya ayarlama işlemi yapmadan önce güç kaynağının bağlantısını kesin.
3. Ürün Bittiview
The Scheppach HC06 is a compact and portable air compressor designed for ease of use and transport. It features an oil-free motor for reduced maintenance.
Şekil 1: Scheppach HC06 Air Compressor with a coiled air hose, tire inflator with gauge, and blow gun.
Temel Bileşenler:
- Hava tankı: 6-liter capacity for storing compressed air.
- Motor: 1200W powerful, oil-free motor.
- Basınç Göstergeleri: Displays tank pressure and regulated outlet pressure.
- Basınç düzenleyici: Allows adjustment of the output air pressure.
- Hızlı bağlayıcı: For easily attaching air hoses and tools.
- Tahliye vanası: Yoğuşma suyunun tahliyesi için tankın alt kısmında bulunur.
- Taşıma Sapı: Kolay taşınabilirlik için entegre sap.
Şekil 2: The compact design and integrated handle make the HC06 easy to transport.
4. Kurulum
Follow these steps for initial setup of your air compressor.
- Paketin açılması: Carefully remove the compressor and all accessories from the packaging. Inspect for any shipping damage.
- Atama: Place the compressor on a stable, level surface. Ensure there is adequate ventilation around the unit.
- Elektrik Bağlantısı: Connect the power cord to a grounded 230V electrical outlet.
- Hava Hortumunu Takın: Connect your air hose to the quick connector on the compressor. Ensure a secure fit.
- İlk Çalıştırma: Before connecting any tools, turn on the compressor and allow it to build pressure until it automatically shuts off. Check for any unusual noises or air leaks.
Şekil 3: The compressor is ready for use on a stable workbench.
5. Kullanım Talimatları
This section details how to operate your Scheppach HC06 air compressor for various applications.
Başlatma ve Durdurma
- Başlamak: Flip the ON/OFF switch to the 'ON' position. The compressor will begin to build pressure.
- Otomatik Kapanma: The compressor will automatically shut off once the maximum tank pressure (8 bar) is reached. It will restart automatically when the pressure drops below a certain threshold.
- Durdurmak için: Flip the ON/OFF switch to the 'OFF' position.
Adjusting Output Pressure
- Ensure the compressor is running and the tank is pressurized.
- Turn the pressure regulator knob (usually red) to increase or decrease the output pressure. Observe the regulated pressure gauge.
- Always set the output pressure according to the requirements of your air tool or application.
Using with Accessories and Tools
Şekil 4: Inflating a car tire with the HC06 compressor and included accessories.
- Lastik Şişirme: Attach the tire inflator to the air hose. Connect the inflator to the tire valve and monitor the pressure gauge on the inflator.
- Blowing/Cleaning: Attach the blow gun to the air hose. Use short bursts of air for cleaning surfaces or drying.
- Pneumatic Tools: Connect your pneumatic tool to the air hose. Ensure the tool's operating pressure matches the regulated output pressure of the compressor.
Şekil 5: The HC06 can power various pneumatic tools, such as this circular saw.
6. Bakım
The Scheppach HC06 is an oil-free compressor, requiring minimal maintenance. Regular checks ensure longevity and optimal performance.
Yoğuşma Suyunun Tahliyesi
Compressed air contains moisture, which condenses in the tank. This water must be drained regularly to prevent corrosion and maintain tank capacity.
- Ensure the compressor is turned off and disconnected from the power supply.
- Place a suitable container under the drain valve located at the bottom of the tank.
- Slowly open the drain valve to release the condensed water and any remaining air pressure.
- Close the drain valve securely once all water has been expelled.
Genel Temizlik ve Depolama
- Temizlik: Wipe down the exterior of the compressor with a damp bez. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
- Depolamak: Store the compressor in a dry, clean, and protected area when not in use. Ensure the tank is drained of condensation before storage.
Şekil 6: Proper storage helps protect the compressor and prolong its lifespan.
7. Sorun Giderme
Bu bölümde, hava kompresörünüzle ilgili karşılaşabileceğiniz yaygın sorunlara çözümler sunulmaktadır.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| kompresör çalışmıyor | Güç kaynağı yok Açma/kapama düğmesi 'KAPALI' konumunda Aşırı termal yüklenme devreye girdi. | Güç bağlantısını ve prizi kontrol edin Flip switch to 'ON' Allow compressor to cool down, then restart |
| Low or no air pressure at outlet | Pressure regulator set too low Air leak in hose or connections Tank pressure too low | Adjust regulator knob Check all connections for leaks, tighten or replace Allow compressor to build full tank pressure |
| Kompresör sürekli çalışır | Air leak in tank or connections Basınç anahtarı arızası | Check for leaks, tighten connections Servis için müşteri desteğine başvurun |
| Aşırı gürültü veya titreşim | Gevşek bileşenler Compressor not on a level surface | Check and tighten all visible fasteners Sağlam, düz bir yüzeye yerleştirin |
8. Özellikler
| Özellik | Şartname |
|---|---|
| Marka | Scheppach |
| Örnek | HÇ06 |
| Güç | 1200 B |
| Tank Hacmi | 6 Litre |
| Maksimum Çalışma Basıncı | 8 Bar |
| Hava Akış Kapasitesi | Dakikada 200 Litre |
| Cilttage | 230 Volt |
| Gürültü Seviyesi | 97 dB |
| Ürün Ağırlığı | 11.7 Kilogram (25.7 pound) |
| Ürün Boyutları (U x G x Y) | 12.76" x 10.87" x 13.78" |
| Özel Özellik | Portable, Oil-free |
| Dahil Bileşenler | Accessories (hose, tire inflator, blow gun, adapters) |
9. Garanti ve Destek
Scheppach products are manufactured to high-quality standards. This product comes with a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and claim procedures.
For technical assistance, spare parts, or warranty claims, please contact Scheppach customer support. Ensure you have your model number (HC06) and proof of purchase available when contacting support.
AB Yedek Parça Temin Süresi: 7 Yıl
