Vortex Optics AMG UH-1 Gen II Holographic Sight User Manual

giriiş

The Vortex Optics AMG UH-1 Gen II Holographic Sight is designed for rapid target acquisition and enhanced situational awareness. This advanced holographic display offers four night vision compatible settings and a dedicated night vision button for versatile use in various lighting conditions. Its robust construction ensures durability and reliable performance in the field.

Key features include an enlarged viewing window for an improved sight picture, a toolless battery cover for easy battery changes, and a lighter load at just 11 ounces. The lightning-quick EBR-CQB reticle with 15 illumination settings and our FHQ technology virtually eliminates stray light emissions for zero forward signature. An integrated, quick-release mount makes the sight easy to install and puts the optic at lower 1/3 cowitness height on either Weaver or Picatinny rails. Rugged construction creates a shockproof sight. Ultra-hard, scratch-resistant ArmorTek coating protects exterior lenses from scratches, oil and dirt. O-ring seals help to provide waterproof and fogproof performance in the field.

Kurmak

Pil Kurulumu

The AMG UH-1 Gen II uses a CR123A 3V Lithium battery. To install or replace the battery:

1. Locate the toolless battery cover on the side of the sight.
2. Unscrew the battery cover by hand.
3. Insert the CR123A battery with the positive (+) end facing inwards.
4. Replace the battery cover and tighten it securely by hand.

Şekil 1: Yan view of the UH-1 Gen II, highlighting the battery compartment.

Görüşü Monte Etme

The sight features an integrated quick-release mount for easy attachment to Weaver or Picatinny rails. This mount positions the optic at a lower 1/3 cowitness height.

1. Ensure the quick-release lever is in the open position.
2. Align the sight's mount with the rail slots.
3. Press down firmly on the sight to seat it onto the rail.
4. Close the quick-release lever until it locks securely. Ensure the sight is firmly attached and does not wobble.

Figure 2: Annotated diagram showing the integrated quick-release mount and other features.

Kullanım Talimatları

Açma/Kapama ve Parlaklık Ayarı

The AMG UH-1 Gen II features intuitive controls for power and brightness located on the rear of the sight.

• To turn on the sight, press either the Eksi (-) or Artı (+) düğme.
• Parlaklığı artırmak için basın. Artı (+) button. There are 15 illumination settings available.
• Parlaklığı azaltmak için basın. Eksi (-) düğme.
• To turn off the sight, press and hold both the Eksi (-) Ve Artı (+) buttons simultaneously until the reticle disappears.

Şekil 3: Arka view of the UH-1 Gen II, showing the brightness and night vision control buttons.

Night Vision (NV) Mode

The sight includes a dedicated NV button for seamless transition to night vision compatible settings.

• Basın NV button to activate night vision mode. There are four NV compatible settings.
• Kullanın Eksi (-) Ve Artı (+) buttons to adjust brightness within the night vision mode.
• Basın NV button again to exit night vision mode and return to standard illumination settings.

Elevation and Windage Adjustment

Adjustments for elevation (vertical) and windage (horizontal) are made using the turrets on the side of the sight. Each click adjusts the point of impact by 0.5 MOA.

• Yükseklik Ayarı: Located on the top-right side (when viewed from the rear). Turn the dial UP to move the point of impact up, and AŞAĞI to move it down.
• Rüzgar Ayarı: Located on the right side (when viewed from the rear). Turn the dial SAĞ to move the point of impact right, and SOL to move it left.

Şekil 4: Yan view of the UH-1 Gen II, indicating elevation and windage adjustment points.

EBR-CQB Reticle

The sight utilizes the EBR-CQB reticle, designed for fast and precise aiming. This reticle provides a clear aiming point for close-quarters battle scenarios.

Figure 5: Representation of the EBR-CQB reticle as seen through the sight.

Bakım

Lens Bakımı

The exterior lenses are protected by an ArmorTek coating, making them scratch-resistant. To maintain optical clarity:

• Gently brush away any loose dirt or dust from the lenses using a soft brush or compressed air.
• Use the provided lens cloth or a clean, soft microfiber cloth to wipe the lenses.
• For stubborn smudges or fingerprints, apply a small amount of lens cleaning solution to the cloth, not directly to the lens, and gently wipe.
• Avoid using harsh chemicals, abrasive cloths, or excessive force, as this can damage the lens coatings.

Pil Değişimi

Refer to the "Battery Installation" section under Setup for detailed instructions on replacing the CR123A battery. Regular battery checks are recommended to ensure optimal performance.

Sorun giderme

If you encounter issues with your AMG UH-1 Gen II Holographic Sight, consider the following common troubleshooting steps:

• Retikül Aydınlanmıyor: Check the battery. Ensure it is a fresh CR123A battery and is inserted with the correct polarity. Tighten the battery cap securely.
• Nişan işareti soluk görünüyor: Adjust the brightness settings using the Artı (+) button. If in night vision mode, ensure it is set to an appropriate brightness level for your environment.
• Nişangah Titremesi: This can sometimes occur with holographic sights. Ensure the battery is fully seated and the cap is tight. If the issue persists, try a new battery.
• Sight Not Holding Zero: Ensure the sight is securely mounted to the rail. Check that the quick-release lever is fully engaged and tightened. Verify that the rail itself is stable and not loose.
• Lenslerin buğulanması: The sight is O-ring sealed for fogproof performance. If fogging occurs internally, contact Vortex Optics customer support. External fogging can be wiped away with a lens cloth.

Bu adımlarla çözülemeyen sorunlar için lütfen Garanti ve Destek bölümüne bakın.

Özellikler

Resmi Ürün Videosu

Garanti ve Destek

Vortex Optics stands behind its products with an unlimited, unconditional, lifetime VIP Warranty. This is a fully transferable promise to repair or replace your item if it becomes damaged or defective. This warranty does not cover loss, theft, deliberate damage, or cosmetic damage that does not hinder performance.

Garanti talepleri veya teknik destek için lütfen Vortex Optics ile doğrudan resmi iletişim kanalları aracılığıyla iletişime geçin. website veya müşteri hizmetleri kanalları.

Daha fazla bilgi için resmi web sitesini ziyaret edin Amazon'daki Vortex Mağazası.