YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP User Manual

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Paket İçeriği

Paketinizin aşağıdaki öğeleri içerdiğini doğrulayın:

• 1 x YuanLey 8 Port 2.5G Ethernet Switch
• 1 x Güç Kablosu
• 1 x Kullanım Kılavuzu

3. Ürün Özellikleri

• 9 Port Configuration: Includes 8 x 2.5 Gigabit Ethernet ports and 1 x 10G SFP+ Port.
• Yüksek Hızlı Performans: Delivers 2.5 times faster network performance than traditional Gigabit switches, with a switching capacity of up to 60Gbps.
• Tak ve Çalıştır: Unmanaged design requires no configuration for immediate use.
• Durable and Quiet: Features a metal case with 6KV lightning protection and a fanless design for silent operation.
• Geniş Çalışma Sıcaklığı: Functions reliably in temperatures ranging from -10°C to 50°C.
• Çok Yönlü Yerleştirme: Supports both wall mount and desktop placement.

4. Ürün Bittiview

Figure 4.1: YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch

Şekil 4.2: Ön Panel Üstüview with Ports and Indicators

The switch features 8 RJ45 ports supporting 10/100/1000Mbps/2.5G adaptive speeds and 1 SFP+ port for 1G/2.5G/10G fiber connections. LED indicators provide status for power and link activity.

Şekil 4.3: Arka Panel Üzeriview Güç Girişi ile

Şekil 4.4: Ayrıntılı View of Ports and Indicators

The rear panel includes the DC 12V/1.0A power input port and a grounding screw for electrical safety. The front panel LEDs indicate power status, 2.5Gbps link speed (orange), and 100/1000Mbps link speed (green) for RJ45 ports, and link status for the SFP+ port.

5. Kurulum

Follow these steps to set up your YuanLey Ethernet Switch:

1. Gücü bağlayın: Plug the provided power adapter into the DC 12V/1.0A input port on the rear of the switch, then plug the adapter into a power outlet. The PWR LED on the front panel will illuminate green.
2. Ethernet Aygıtlarını Bağlayın: Connect your network devices (e.g., computers, NAS, WiFi 6 APs, gaming PCs) to the 2.5G Base-T ports (1-8) using standard Ethernet cables (Cat5e or higher recommended for 2.5G speeds). The corresponding port LEDs will light up to indicate a successful connection and speed.
3. Connect SFP+ Module (Optional): If using the 10G SFP+ port, insert a compatible 1G/2.5G/10G SFP/SFP+ module (not included) into the SFP+ slot. Then, connect a fiber optic cable or DAC cable to the module. The SFP indicator LED will light up when a link is established.

Figure 5.1: Typical Network Setup with the YuanLey Switch

6. Anahtarın Çalıştırılması

The YuanLey 2.5G Unmanaged Ethernet Switch is designed for simple plug-and-play operation. Once powered on and connected to your network devices, it will automatically detect the link speed and establish connections without any further configuration.

• LED Göstergeleri: Observe the PWR, L1-L8, and SFP+ Link LEDs to monitor the switch's status and network activity.
• Otomatik MDI/MDIX: The switch supports Auto MDI/MDIX, eliminating the need for crossover cables.
• Adaptive Speed: RJ45 ports automatically adapt to 10/100/1000Mbps or 2.5Gbps.

7. Bakım

To ensure optimal performance and longevity of your switch, consider the following maintenance guidelines:

• Atama: Place the switch in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. The fanless design relies on natural convection for cooling.
• Temizlik: Periodically clean the exterior of the switch with a soft, dry cloth. Avoid using liquid or aerosol cleaners.
• Kablo yönetimi: Ağ kablolarının düzgün bir şekilde düzenlendiğinden ve aşırı bükülmediğinden veya gerilmediğinden emin olun.
• Güç Kaynağı: Use only the original power adapter provided with the switch.

Figure 7.1: Fanless Design and Environmental Considerations

8. Sorun Giderme

If you encounter issues with your switch, refer to the following common problems and solutions:

• Güç Yok:
  • Güç adaptörünün anahtara ve çalışan bir elektrik prizine güvenli bir şekilde bağlı olduğundan emin olun.
  • Check if the PWR LED is illuminated. If not, try a different power outlet.
• Bir bağlantı noktasında bağlantı/etkinlik yok:
  • Ethernet kablosunun hem switch portuna hem de ağ cihazına güvenli bir şekilde bağlı olduğundan emin olun.
  • Farklı bir Ethernet kablosu deneyin.
  • Bağlı cihazın açık olduğundan ve düzgün çalıştığından emin olun.
  • Check the LED indicator for the specific port. If it's off, there might be no link.
• Yavaş Ağ Hızı:
  • Ensure all devices in the network path (NICs, cables, routers) support 2.5G speeds to achieve maximum performance.
  • Use Cat5e or higher-rated Ethernet cables for 2.5G connections.
  • Check the color of the port LED: Orange indicates 2.5Gbps, Green indicates 100/1000Mbps.
• SFP+ Port Issues:
  • Ensure the SFP/SFP+ module is correctly inserted and compatible with the switch.
  • Verify the fiber optic or DAC cable is properly connected and undamaged.
  • Check the SFP indicator LED for link status.

9. Özellikler

Şekil 9.1: Ürün Boyutları

10. Garanti ve Destek

YuanLey products are designed for reliability and performance. For warranty information and technical support, please refer to the official YuanLey webSite üzerinden satın alabilir veya doğrudan müşteri hizmetleriyle iletişime geçebilirsiniz. Garanti talepleriniz için satın alma fişinizi saklayın.

Daha fazla yardım için şu adresi ziyaret edebilirsiniz: YuanLey Store on Amazon.