TOPXCDZ LED Constant Current Driver (3-5W, 300mA) Instruction Manual

1. Giriş

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your TOPXCDZ LED Constant Current Driver, specifically the 3-5W, 300mA model. Please read these instructions thoroughly before use to ensure proper functionality and to prevent damage or injury.

2. Güvenlik Bilgileri

Adherence to the following safety guidelines is crucial for preventing electrical hazards and ensuring the longevity of the product.

Danger! No-load testing is strictly forbidden. Testing the driver without a connected LED load can result in inaccurate data and potential damage to the unit. Always connect to a suitable LED bulb or array for testing.
Giriş hacmini sağlayıntage (AC85-265V) matches your power supply.
Do not exceed the specified output wattage (3-5W) or current (300mA) for the connected LED load.
Installation should be performed by qualified personnel to avoid electrical shock or fire hazards.
Disconnect power before installation, maintenance, or troubleshooting.
This driver features overvoltage protection, overload protection, overheat protection, and short circuit protection. However, proper installation and usage are still required.
Keep the driver away from moisture and extreme temperatures.

3. Ürün Özellikleri

The TOPXCDZ LED Constant Current Driver (3-5W, 300mA) is designed to provide stable power to compatible LED lighting. Key specifications are detailed below:

TOPXCDZ 3-5W 300mA LED Driver front view with specifications printed on label

Resim 1: Ön view of the TOPXCDZ 3-5W 300mA LED Driver, showing input/output labels and model information.

Model: 3-5W 300mA LED Driver
Parametre	Değer
Giriş Voltage	AC 85-265V
Çıkış Hacmitage (AC230V load test)	DC 9-18V
Çıkış Akımı	300mA
Çıkış Gücü	3-5W
Boyutlar (UGY)	64mm * 30mm * 20mm
Koruma Özellikleri	aşırı sestage, Overload, Overheat, Short Circuit
Titreme	titreme yok

4. Kurulum Kılavuzu

Proper installation is critical for the safe and effective operation of the LED driver. Ensure power is disconnected before beginning installation.

TOPXCDZ LED Driver with AC input and DC output wires clearly visible

Resim 2: Yan view of the LED Driver showing the AC input wires (AC-L, AC-N) and DC output wires (LED+, LED-).

Güç Bağlantısının Kesilmesi: Turn off the main power supply to the circuit where the LED driver will be installed. Verify power is off using a voltage test cihazı.
Kabloları Tanımlayın: The LED driver has two sets of wires:
- Input Wires (AC): Typically marked AC-L (Live) and AC-N (Neutral). These connect to your main AC power supply (85-265V).
- Output Wires (DC): Typically marked LED+ (Positive) and LED- (Negative). These connect to your LED light fixture.
Connect AC Input: Connect the AC-L wire from the driver to the Live wire of your AC power supply. Connect the AC-N wire from the driver to the Neutral wire of your AC power supply. Ensure connections are secure and insulated.
Connect DC Output: Connect the LED+ wire from the driver to the positive terminal of your LED light fixture. Connect the LED- wire from the driver to the negative terminal of your LED light fixture. Observe correct polarity.
Güvenli Kurulum: Mount the LED driver in a suitable, well-ventilated location, away from direct heat or moisture. Ensure it is securely fastened and that all wiring is protected.
Güç Restorasyonu: Tüm bağlantılar güvenli ve doğrulandıktan sonra devreye gücü geri verin.

5. Operasyon

The TOPXCDZ LED Constant Current Driver operates automatically once properly installed and powered. It is designed to provide a stable 300mA current to the connected LED load within its specified voltage range (9-18V DC for 3-5W models).

The driver will automatically adjust its output voltage to maintain the constant current required by the LED lamp performans.
No user intervention is required for normal operation.

6. Bakım

The LED driver is designed for minimal maintenance. Regular checks can help ensure optimal performance and longevity.

Temizlik: Periodically inspect the driver for dust accumulation. If necessary, gently clean the exterior with a dry, soft cloth. Ensure power is disconnected before cleaning.
Denetleme: Annually inspect wiring for any signs of wear, damage, or loose connections. Address any issues promptly.
Çevre: Çalışma ortamının belirtilen sıcaklık ve nem aralıklarında kalmasını sağlayın.

7. Sorun Giderme

If you encounter issues with your LED driver, refer to the following troubleshooting steps:

Sorun	Olası Neden	Çözüm
LED'ler yanmıyor	No power to the driver. Incorrect wiring (AC input or DC output). LED load is faulty or incompatible. Driver is faulty.	Güç kaynağını ve sigortayı kontrol edin. Verify all wiring connections (AC-L, AC-N, LED+, LED-). Ensure correct polarity. Test the LED fixture with a known good driver or power supply. If all else fails, the driver may need replacement.
LED'ler titriyor veya sönükleşiyor	Gevşek bağlantılar. Incompatible LED load (e.g., wattage too high/low). giriş hacmitage dalgalanmalar.	Tüm kablo bağlantılarını kontrol edin ve sabitleyin. Ensure the LED load is within the 3-5W range and requires 300mA. Verify stable AC input voltage.
Driver is hot to touch	Zayıf havalandırma. Overloaded LED fixture. Yüksek ortam sıcaklığında çalışmak.	Ensure adequate airflow around the driver. Verify the LED load does not exceed 5W. Relocate the driver to a cooler environment if possible.

Önemli Not: Remember that no-load testing is forbidden. Always connect a compatible LED load before applying power to the driver for testing or operation.

8. Garanti ve Destek

For warranty information or technical support, please contact TOPXCDZ customer service through the retailer where the product was purchased. Please have your purchase details and product model number (3-5W 300mA) available when contacting support.

While specific warranty terms are not detailed here, TOPXCDZ products are generally covered against manufacturing defects. Misuse, improper installation, or unauthorized modifications will void any applicable warranty.

	LTSYS SE-20-300-650-G1T Intelligent LED Driver: Features, Specs, and Installation Detailed technical specifications, features, wiring diagrams, installation guide, and warranty information for the LTSYS SE-20-300-650-G1T Constant Current Intelligent LED Driver with Triac/ELV dimming.
	MEAN WELL LPF-25D Series: 25W Constant Current LED Driver \| IP67, 3-in-1 Dimming Explore the MEAN WELL LPF-25D series, a 25W AC/DC constant current LED driver designed for efficient and reliable LED lighting. Features include IP67 ingress protection, 3-in-1 dimming, wide input voltage range (90-305VAC), and operation across a broad temperature range (-35°C to +70°C case temperature). Ideal for LED panel lighting, downlights, and moving signs.
	MEAN WELL HBG-240 Serisi 240W Sabit Voltajlıtage + Sabit Akım LED Sürücüsü Veri Sayfası MEAN WELL HBG-240 serisi 240W LED sürücüsü için kapsamlı teknik veri sayfası. Özellikler, fonksiyonlar, karartma seçenekleri (3'ü 1 arada, DALI), performans grafikleri, mekanik boyutlar ve iç ve dış mekan uygulamaları için kurulum kılavuzu gibi detaylar yer almaktadır.
	PE294R Serisi Triyak Karartma LED Sürücüsü Veri Sayfası \| Sabit Akım, 3-12W Shenzhen Starwell Technology tarafından üretilen PE294R serisi sabit akım triyak kısılabilir LED sürücüler için ayrıntılı veri sayfası. Özellikler arasında %2-100 kısma aralığı, aktif PFC ve çoklu koruma devreleri bulunur. Teknik özellikler, kablo şemaları ve uyumluluk bilgileri de mevcuttur.
	Small Transformer User Manual - Safety, Specifications, and Standards User manual for a small transformer, detailing product description, limitations, applicable standards (EN 61558), and critical safety warnings regarding electric shock and fire hazards.
	Inventronics NES-1K8TxxxBC: 1800W 3-Channel Programmable IP66 LED Driver Datasheet Datasheet for the Inventronics NES-1K8TxxxBC, an 1800W, 3-channel, programmable IP66 LED driver with DALI-2 and DMX-RDM dimming, high efficiency, and comprehensive protection features for various lighting applications.

TOPXCDZ 3-5W 300mA