1. Giriş
Thank you for choosing the FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank. This device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for various electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.
Image 1.1: The FLYLINKTECH BD10 Jump Starter unit with its smart battery clamps.
2. Güvenlik Bilgileri
Yaralanmaları veya cihaza ya da araca zarar gelmesini önlemek için her zaman aşağıdaki güvenlik önlemlerine uyun:
- Donmuş bir aküyü takviye kablosuyla çalıştırmaya çalışmayın.
- Doğru kutup bağlantısını sağlayın (kırmızı klips)amp pozitif, siyah clamp to negative). Reverse polarity can cause damage.
- Akıllı CL'ye izin vermeyin.amps to touch each other when connected to the jump starter.
- Cihazı çocuklardan uzak tutunuz.
- Do not expose the device to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
- Cihazı sökmeyin veya üzerinde değişiklik yapmayın.
- Yalnızca birlikte verilen akıllı klipsleri kullanın.ampve şarj kabloları.
- If the device becomes excessively hot during use, disconnect it immediately.
Image 2.1: The jump starter incorporates multiple safety features such as spark-proof, reverse polarity, overvoltage, short circuit, overload, and high-temperature protection.
3. Paket İçeriği
Paketin içinde tüm öğelerin mevcut olduğundan emin olun:
- FLYLINKTECH BD10 Jump Starter Unit
- Akıllı Pil Clamps
- USB-C'den USB-C'ye Kablo
- USB-A - USB-C Kablosu
- 12V DC Araç Şarj Adaptörü
- Kullanıcı Kılavuzu
- Depolama Kasası
Image 3.1: The complete package includes the jump starter, smart clamps, various cables, user manual, and a protective storage case.
4. Kurulum ve Şarj
4.1 İlk Ücretlendirme
Before first use, fully charge the jump starter. The device features a 26800mAh battery capacity.
- Connect the provided USB-C cable to the jump starter's USB-C input port.
- Connect the other end of the cable to a compatible USB wall charger (not included). For fastest charging, use a PD 45W charger.
- LED ekran şarj durumunu ve pil yüzdesini gösterecektir.tage.
4.2 Şarj Süreleri
| Şarj Cihazı Derecelendirmesi | Yaklaşık Şarj Süresi |
|---|---|
| 5W | 18 Saat |
| 18W | 7 Saat |
| 45W | 2 Saat |
Note: A 45W wall charger is not included in the package.
Image 4.1: The device supports PD 45W fast charging, significantly reducing recharge time when using a compatible charger.
5. Kullanım Talimatları
5.1 Aracın Takviyeyle Çalıştırılması
The FLYLINKTECH BD10 is capable of jump-starting all gas engines and diesel engines up to 12.0L.
- Yeterli Şarj Olduğundan Emin Olun: Check the jump starter's LED screen to ensure it has at least 50% charge.
- Akıllı Cl'yi Bağlayınamps: Akıllı cihazın mavi fişini takın.amps into the jump starter's 12V output port. Ensure a firm connection.
- Araba Aküsüne Bağlayın:
- Ekle kırmızı (+) clamp Aracın pozitif akü kutbuna.
- Ekle siyah (-) clamp to the vehicle's negative battery terminal.
- Kontrol Göstergesi: akıllı clamp indicator light should turn solid green, indicating a correct connection. If it flashes or shows red, check connections and battery status.
- Press BOOST (if needed): If the vehicle battery is extremely low or completely dead, press the 'BOOST' button on the jump starter. Wait for the indicator light on the smart clamps to turn solid green.
- Aracı Başlat: Attempt to start your vehicle. If it doesn't start on the first try, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
- Cl'yi kaldıramps: Araç çalıştırıldıktan hemen sonra akıllı kilidi çıkarın.ampAraç aküsünden ayırın, ardından bunları takviye marşından ayırın.
Image 5.1: The jump starter connected to a car battery, ready for operation. It supports 6000A peak current, 12V output, and is suitable for a wide range of engines.
Image 5.2: Visual guide illustrating the four steps to jump-start a vehicle: connect the plug, attach clamps, press boost, and start the engine.
5.2 Power Bank Fonksiyonu
The BD10 can charge multiple electronic devices via its USB-A and USB-C ports.
- USB1 Çıkışı: 18W'a kadar (maks.)
- USB2 Çıkışı: 18W'a kadar (maks.)
- USB-C Çıkışı: 45 W'a kadar (PD)
Connect your device using the appropriate USB cable to the desired output port. The LED screen will show 'OUT' and the wattage being drawn.
Image 5.3: The jump starter functioning as a power bank, simultaneously charging a smartphone and a tablet via its USB ports.
5.3 LED el feneri
The built-in LED flashlight offers three modes: constant light, SOS signal, and strobe light.
- Press and hold the flashlight button to turn on the constant light.
- Press the button again to cycle through SOS and strobe modes.
- Kapatmak için tekrar basılı tutun.
Image 5.4: The integrated LED flashlight provides illumination, an SOS signal, and a strobe function for emergency situations.
5.4 Informative LED Screen
The 6.0-inch LED screen provides real-time information about the device's status:
- Pil Seviyesi: Kalan pil yüzdesini görüntülertage.
- IN/OUT Indicator: Shows whether the device is charging (IN) or discharging (OUT).
- Netage Ekran: Indicates the power (W) being drawn or supplied.
- Hata Uyarıları: Displays specific error codes or symbols if an issue occurs.
Image 5.5: The 6.0-inch LED screen provides clear information on battery percentage, input/output status, and power consumption.
6. Bakım
- Düzenli Olarak Şarj Edin: To prolong battery life, recharge the jump starter every 3-6 months, even if not in use.
- Depolamak: Store the device in its protective case in a cool, dry place, away from direct sunlight and moisture.
- Temizlik: Cihazı yumuşak, kuru bir bezle silin. Sert kimyasallar veya aşındırıcı malzemeler kullanmayın.
- Clamp Bakım: Akıllı cl'yi sağlayınamps are clean and free of corrosion before and after each use.
7. Sorun Giderme
The device features multiple alarm situations indicated by audible signals and screen displays:
- Düşük Hacimtage Koruma: Audible signal "3". Recharge the device.
- Harici Hacimtage Exceeds Vehicle Voltage: Audible signal "4". Check vehicle battery voltage.
- Kısa Devre Koruması: Audible signal "5". Check clamp connections for short circuits.
- Safety Mode Activated: Audible signal "6". Device has entered safety mode due to an issue.
- Aşırı Akım Koruması: Audible signal "7". Reduce load or check connections.
- Yüksek/Düşük Sıcaklık Alarmı: Audible signal "8". Allow device to return to operating temperature range (-20°C to 60°C).
- Reverse Connection: Audible signal "9". Correct the clamp polarite.
Resim 7.1: Üzeriview of the device's multi-alarm system, indicating various protection states with unique audible signals.
Bu adımları uyguladıktan sonra sorunlar devam ederse, lütfen müşteri desteğiyle iletişime geçin.
8. Özellikler
| Özellik | Şartname |
|---|---|
| Marka | UÇAK BAĞLANTI TEKNOLOJİSİ |
| Örnek | BD10 |
| Tepe Çıkış Akımı | 6000 Ampburada |
| Pil Kapasitesi | 26800mAh |
| Çıkış Hacmitage | 12V |
| USB-C Giriş/Çıkış | PD45W |
| USB-A Çıkışı | 18W (maksimum) |
| Applicable Engine Types | All Gas, up to 12.0L Diesel |
| Çalışma Sıcaklığı | -20°C ila 60°C (-4°F ila 140°F) |
| Ürün Boyutları | 23.95x10x5.69 cm |
| Ürün Ağırlığı | 920 gr |
Image 8.1: The device is designed to operate reliably in extreme climates, from -20°C (-4°F) to 60°C (140°F).
9. Garanti ve Destek
FLYLINKTECH is committed to providing high-quality products. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH webLütfen garanti işlemleri için satın alma belgenizi saklayın.
