PAC LOC Pro Gelişmiş Ses Entegrasyonu T-Kablo Demeti LPHFD31 Kullanım Kılavuzu

1. Giriş

The PAC L.O.C. Pro Advanced Audio Integration T-Harness (Model LPHFD31) is designed to simplify the installation of aftermarket audio equipment in select Ford vehicles. This vehicle-specific T-harness provides all necessary high-level inputs and speaker outputs, allowing you to add amplifiers and other audio components while retaining your factory radio. It is specifically engineered for OEM non-ampLifli sistemler.

Şekil 1: The PAC L.O.C. Pro Advanced Audio Integration T-Harness (Model LPHFD31) showing its various connectors and wiring.

2. Araç Uyumluluğu

This T-Harness is compatible with the following non-amplified Ford vehicles:

• Ford Bronco and Bronco Sport: 2021-2023 (all trim levels)
• Ford Eco Sport: 2018-2022
• Ford Econoline Van: 2021-2023
• Ford Escape: 2020-2023
• Ford Expedition: 2022-2023
• Ford Explorer: 2020-2023
• Ford F-150: 2021-2023
• Ford F-250/350/450/550: 2020-2023
• Ford Lightning: 2022-2023
• Ford Maverick: 2022-2023
• Ford Mustang Mach E: 2021-2023
• Ford Ranger: 2020-2023
• Ford Transit Connect: 2019-2023

Önemli: This product is NOT for use in vehicles with a factory ampcankurtaran.

3. Kutuda Neler Var?

Your PAC L.O.C. Pro Advanced Audio Integration T-Harness package includes:

• PAC L.O.C. Pro Advanced Audio Integration T-Harness (LPHFD31)
• Kullanım Kılavuzu

4. Kurulum ve Yükleme

The LPHFD31 T-Harness simplifies the process of integrating aftermarket audio components into your vehicle's existing non-amplified factory stereo system. It provides clearly labeled pigtail harnesses for front and rear speaker leads, allowing for easy connection to a Line Output Converter (LOC) or directly to an aftermarket amplifier with high-level inputs.

4.1 Genel Kurulum Adımları

1. Pilin Bağlantısını Kes: Before beginning any electrical work, disconnect the vehicle's negative battery terminal to prevent electrical shorts or damage.
2. Access Factory Radio: Carefully remove the vehicle's factory radio to gain access to the wiring harness. Refer to your vehicle's service manual for specific instructions on radio removal.
3. T-kabloyu bağlayın: Disconnect the factory wiring harness from the back of the radio. Connect the PAC LPHFD31 T-Harness in-line with the factory radio and the vehicle's wiring. The T-Harness will have connectors that match the factory plugs.
4. Identify Speaker Leads: The LPHFD31 T-Harness features clearly labeled pigtail harnesses for front and rear speaker leads. These wires will provide the high-level audio signal from your factory radio.
5. Connect to Aftermarket Equipment:
   • For Line Output Converter (LOC): If using an LOC (e.g., AudioControl LC2i), connect the appropriate speaker leads from the T-Harness to the high-level inputs of the LOC. The LOC will convert these signals to low-level RCA outputs for your aftermarket ampcankurtaran.
   • For Aftermarket Amplifier with High-Level Inputs: If your aftermarket amplifier accepts high-level inputs, connect the speaker leads directly from the T-Harness to the amplifier's high-level input terminals.
6. Güç ve Toprak Bağlantıları: Satış sonrası hizmetinizin güvencesini sağlayın. amplifier and/or LOC receive proper power (+12V), ground, and remote turn-on connections. The T-Harness may provide a remote turn-on output (GTO signal sensing input on some LOCs) or you may need to tap into an accessory wire.
7. Rota Kablolaması: Carefully route all new wiring to avoid interference, pinching, or damage. Secure wiring with zip ties or electrical tape.
8. Yeniden birleştirme: Once all connections are secure and verified, reassemble the vehicle's dashboard and reconnect the battery.

4.2 Visual Installation Aids

5. Çalışma Prensipleri

The PAC LPHFD31 T-Harness is a passive component that facilitates the integration of aftermarket audio equipment. It does not actively process audio signals or control vehicle functions. Its primary role is to provide a clean, accessible point to tap into the factory speaker wiring without cutting or modifying the original harness.

• Signal Transfer: The harness transfers the high-level audio signals from your factory radio to the connected aftermarket devices (e.g., LOC, ampkaldırıcı).
• Factory Radio Retention: Your factory radio will continue to operate as normal, controlling volume, source selection, and other features. The T-Harness simply provides an output for additional audio components.
• Aftermarket Component Control: The operation and sound quality of your aftermarket audio system will be controlled by the connected LOC, amplifier, and other components. Adjustments to bass, gain, and crossover frequencies will be made on these devices.

6. Bakım

The PAC LPHFD31 T-Harness requires minimal maintenance. Once installed correctly, it is designed for long-term, reliable operation.

• Düzenli Muayene: Periodically check all connections to ensure they remain secure and free from corrosion.
• Temizlik: Keep the area around the harness and connected components clean and free of dust or debris.
• Nemden Kaçının: Ensure the harness and connections are protected from moisture and extreme temperatures.
• Profesyonel Kontrol: If you experience any audio issues after installation, consult a professional car audio technician.

7. Sorun Giderme

If you encounter issues after installing the PAC LPHFD31 T-Harness, consider the following common troubleshooting steps:

8. Özellikler

• Marka: PAC
• Modeli: LPFD31
• Malzeme: Bakır, Polivinil Klorür (PVC)
• Öğe Boyutları (U x G x Y): 8 x 5 x 2 inç
• Bağlantı Tipi: 32 pinli Konnektör
• Ürün Ağırlığı: 5.8 ons
• Önerilen Kullanımlar: Automotive: Non-amplified Ford Vehicles (2018-2023)
• UPC: 609098900478

9. Garanti ve Destek

For specific warranty information and technical support, please refer to the official PAC Audio webSiteyi ziyaret edin veya doğrudan müşteri hizmetleriyle iletişime geçin. Satın alma belgenizi herhangi bir garanti talebi için saklayın.