ALLmeter Pen Type Digital Multimeter AC Voltage Tester (Model B0C4SRMFMD) Instruction Manual

1. Giriş

This manual provides detailed instructions for the safe and effective use of your ALLmeter Pen Type Digital Multimeter, Model B0C4SRMFMD. This device is designed for measuring AC/DC voltage, resistance, diode, and continuity. It also features non-contact voltage (NCV) detection and live wire identification. Please read this manual thoroughly before operation and retain it for future reference.

2. Güvenlik Bilgileri

WARNING: Electrical shock hazard. Improper use of this meter can cause injury or death. Follow all safety precautions.

• Always ensure the meter is in good working condition before use. Inspect for any damage to the casing or test leads.
• Hacmi ölçmeye çalışmayıntagBelirtilen azami limitleri aşan akımlar veya akımlar.
• Exercise extreme caution when working with live circuits. Always assume circuits are live until verified otherwise.
• Wear appropriate personal protective equipment (PPE), such as safety glasses and insulated gloves.
• Do not use the meter in wet environments or if your hands are wet.
• Çalıştırmadan önce pil bölmesinin güvenli bir şekilde kapatıldığından emin olun.
• Bu cihaz AC voltaj için tasarlanmıştır.tage detection in NCV mode and cannot measure DC current.

3. Ürün Bittiview

Familiarize yourself with the components of your ALLmeter Pen Type Digital Multimeter:

Şekil 3.1: Labeled diagram of the ALLmeter Pen Type Digital Multimeter. Key components include the Input COM, Portable pen hook, Select key, HOLD key, N/L/P key, Display LCD, Signal strength indicator, LED light, and Test pen tip.

4. Kurulum

4.1 Pil Kurulumu

The ALLmeter Pen Type Digital Multimeter requires one AAA battery (included). To install or replace the battery:

1. Locate the battery compartment cover, typically at the rear or top of the device.
2. Kapağı açın.
3. Bir adet AAA pili, doğru kutuplara (+/-) dikkat ederek takın.
4. Pil bölmesi kapağını sıkıca kapatın.

The device includes a low-battery indicator on the LCD display to signal when replacement is needed.

5. Kullanım Talimatları

5.1 Güç Açma/Kapatma

Press the 'Select' button to power on the device. The device will automatically power off after 15 minutes of inactivity to conserve battery life.

5.2 Automatic Measurement Function

In automatic mode, the meter intelligently detects the type of measurement (DC/AC voltage or resistance) and displays the value. This simplifies the measurement process by eliminating the need to manually select ranges.

Şekil 5.1: Examples of automatic measurement displays for AC voltage, DC hacimtage, and resistance (Ohm).

5.3 Manual Functions (Electric Field and Live Wire Detection)

Pressing the 'N/L' button cycles through additional functions. Note that in these modes, only AC can be measured, not DC.

Şekil 5.2: Displays for Electric Field (EF) and Live Wire (LIVE) detection modes.

• EF (Electric Fields): This mode detects electric fields without requiring a ground wire. Bring the tip close to a wire to detect if it is live.
• LIVE (Live Wire): In this mode, the device functions as an AC detector. Touch the tip to a wire, and it will beep if the wire is live.

5.4 Diyot Ölçümü

To measure a diode:

1. Press the 'Select' button repeatedly until the diode symbol appears on the screen.
2. Connect the test leads to the diode.

Şekil 5.3: Measuring a diode on a circuit board using the multimeter.

5.5 Süreklilik Testi

The continuity test checks for an unbroken path in a circuit. If a continuous path is detected, the meter will emit an audible beep.

5.6 Temassız Hacimtage (NCV) Tespiti

The NCV feature allows for safe detection of AC voltage without direct contact. The device will indicate the presence of AC voltage within a range of 12V-1000V. In NCV mode, it can only detect alternating current (AC) and cannot measure direct current (DC).

Şekil 5.4: Using the NCV function and LED light in a low-light environment.

5.7 Data Hold (HOLD Key)

Ekrandaki mevcut okumayı dondurmak için 'HOLD' düğmesine basın. Hold fonksiyonunu iptal etmek için tekrar basın.

5.8 LED el feneri

The built-in LED light can be activated to illuminate dimly lit work areas. Refer to the product overview for the location of the LED light.

6. Uygulamalar

The ALLmeter Pen Type Digital Multimeter is suitable for various electrical testing scenarios:

Şekil 6.1: Examples of multi-function usage, including testing electrical outlets and circuit breaker panels.

Şekil 6.2: Testing electrical components within a car engine.

7. Özellikler

8. Bakım

• Temizlik: Wipe the meter with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Depolamak: When not in use for extended periods, remove the battery to prevent leakage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.
• Pil Değişimi: Replace the AAA battery when the low-battery indicator appears on the display.

9. Sorun Giderme

10. Paket İçeriği

The ALLmeter Pen Type Digital Multimeter package includes:

• ALLmeter Pen Type Digital Multimeter
• 1.5V AAA Batarya
• Test Lideri

Şekil 10.1: The included test lead for various measurements.

11. Garanti ve Destek

For warranty information or technical support, please refer to the documentation provided with your purchase or contact ALLmeter customer service directly. Contact details are typically available on the manufacturer's official website veya ürün ambalajı.