ORICO WS400C3 4-Bay 3.5-inch Hard Drive Enclosure User Manual

1. Giriş

The ORICO WS400C3 is a 4-bay external hard drive enclosure designed for 3.5-inch SATA HDDs and 2.5-inch SATA HDDs/SSDs. It provides a reliable solution for centralized data storage, backup, and management for home and business users. Featuring a Type-C to SATA interface, aluminum alloy construction for heat dissipation, and screw-based installation for enhanced drive security, this enclosure supports up to 80TB total capacity (20TB per bay) and offers data transfer speeds of up to 5Gbps.

2. Paket İçeriği

• 1x Aluminum 4 Bay Hard Drive Enclosure
• 1x 1M USB3.2 Gen2 Data Cable
• 1x 1M USB 3.0 Type-A Data Cable
• 1x 12V Güç Adaptörü
• 1x Vida Takımı

3. Ürün Bittiview

The ORICO WS400C3 enclosure is built with an aluminum alloy body and features honeycomb heat dissipation holes, along with an 80mm cooling fan, to maintain optimal operating temperatures for your drives. It supports various RAID modes (0/1/3/5/10/JBOD/CLONE) for flexible data management and protection. The device also includes a 10-minute auto-sleep function to conserve energy and extend hard disk lifespan.

Figure 1: Centralized Storage Capability

Figure 2: Heat Dissipation Design

4. Kurulum ve Yükleme

4.1. Installing 3.5-inch SATA HDDs

1. Unscrew the cover screws on the enclosure to access the drive bays.
2. Slide out an empty drive tray from the enclosure.
3. Align your 3.5-inch SATA HDD with the screw holes on the drive tray.
4. Secure the HDD to the tray using the provided screws.
5. Carefully slide the loaded tray back into the enclosure until it clicks into place.
6. Repeat for additional drives.
7. Re-attach and secure the enclosure cover with the screws.

Figure 3: Enclosure Cover Screw Installation

Figure 4: 3.5-inch HDD Installation

4.2. Installing 2.5-inch SATA HDDs/SSDs (with optional 1125SS Mounting Bracket)

For 2.5-inch drives, an optional 1125SS mounting bracket is required. This bracket allows 2.5-inch drives to fit securely into the 3.5-inch bays.

1. Attach your 2.5-inch SATA HDD/SSD to the 1125SS mounting bracket using screws.
2. Follow steps 1, 2, 5, 6, and 7 from the 3.5-inch HDD installation instructions, treating the bracket-mounted 2.5-inch drive as a 3.5-inch drive.

Figure 5: 2.5-inch SSD with Mounting Bracket

4.3. Kurulum Videosu Rehberi

5. Kullanım Talimatları

5.1. Connecting the Enclosure

1. Connect the 12V power adapter to the enclosure and then to a power outlet.
2. Connect the enclosure to your computer (Laptop, Desktop, etc.) using the provided USB data cable (Type-C to Type-C or Type-C to Type-A).
3. Press the power button on the enclosure to turn it on. The LED indicators for each drive will illuminate.

Figure 6: Power and Data Connections

5.2. Drive Recognition and Formatting

After connecting, your operating system should detect the new storage device. New drives may need to be initialized and formatted before use. Refer to your operating system's disk management tools for this process.

5.3. RAID Yapılandırması

The WS400C3 supports various RAID modes including RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, JBOD, and CLONE. RAID configuration is typically performed via DIP switches located on the back of the enclosure. Warning: Always back up your data before changing RAID modes, as this can result in data loss.

Figure 7: RAID Mode Setting

5.4. Otomatik Uyku Fonksiyonu

The enclosure features an intelligent 10-minute auto-sleep mode. If no data activity is detected for 10 minutes, the device will automatically enter sleep mode to reduce power consumption and prolong the lifespan of the installed hard drives. Activity will resume automatically upon data access.

6. Bakım

• Keep the enclosure in a clean, dust-free environment to ensure proper ventilation.
• Avoid blocking the honeycomb ventilation holes to prevent overheating.
• Kablo bağlantılarının sağlam olduğundan emin olmak için düzenli olarak kontrol edin.
• Safely eject the device from your operating system before disconnecting power or data cables to prevent data corruption.

7. Sorun Giderme

7.1. Drive Not Recognized / Random Disconnections

• Kabloları Kontrol Edin: Ensure all power and data cables are securely connected to both the enclosure and your computer. Try using different USB ports or cables.
• Güç Kaynağı: Verify the 12V power adapter is correctly connected and providing power.
• Sürücü Kurulumu: Confirm that hard drives are properly seated and secured within their trays and that the enclosure cover is fastened.
• İşletim Sistemi: For new drives, ensure they are initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (macOS/Linux). Refer to Video 2 for guidance.
• RAID Ayarları: If using RAID, ensure the DIP switches are set correctly for your desired RAID mode. Incorrect settings can prevent drives from being recognized or cause data issues.
• Sürücü Sorunları: While typically plug-and-play, ensure your operating system has the latest USB drivers.
• Sistem Uyumluluğu: Ensure your operating system (Windows XP / Vista / 7/8, Mac OS X 10.2 and higher, & Linux) is compatible.

7.2. Slow Data Transfer Speeds

• USB Bağlantı Noktası: Connect the enclosure to a USB 3.0 (or higher) port on your computer for optimal speeds. Using a USB 2.0 port will limit transfer rates.
• Kablo Kalitesi: Use the provided high-quality USB 3.2 Gen2 or USB 3.0 cables.
• Drive Performance: The speed of your hard drives themselves can be a limiting factor. Older or slower drives will result in lower transfer speeds.
• Sistem Yükü: High CPU usage or other background processes on your computer can affect transfer speeds.

8. Özellikler

9. Garanti ve Destek

ORICO products typically come with a standard manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official ORICO website. You may also contact ORICO customer service directly through their support channels.