Sanus WSWME12

Sanus Speaker Wall Mounts for Sonos Era 100

Model: WSWME12 - Instruction Manual

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your Sanus Speaker Wall Mounts (Model WSWME12) designed specifically for Sonos Era 100 speakers. Please read these instructions carefully before beginning installation to ensure proper setup and safe use of the product.

2. Ürün Özellikleri

  • Entegre Tasarım: Engineered to seamlessly complement the Sonos Era 100 speaker's aesthetic.
  • Hızlı Kurulum: Designed for an easy DIY installation, typically completed within 15 minutes.
  • Ayarlanabilir Konumlandırma: Offers tool-free tilt adjustment from 7 degrees up to 32 degrees down, and swivel adjustment of 72 degrees left or right for optimal sound direction.
  • Esnek Montaj Seçenekleri: Supports both upright and inverted speaker placement to suit various room layouts and acoustic needs.
  • Güvenli Bağlantı: Utilizes a bottom threaded insert for safe and secure speaker mounting.

3. Güvenlik Bilgileri

Always ensure that the mounting surface can support the weight of the speaker and the mount. Use appropriate hardware for your wall type (e.g., wood stud, concrete, drywall). If you are unsure about the installation process or wall compatibility, consult a qualified professional. Do not exceed the maximum weight capacity of the mount. Keep small parts away from children.

4. Kurulum ve Kurulum

Follow these steps for a secure and efficient installation of your Sanus Speaker Wall Mounts:

  1. Montaj Yerini Hazırlayın: Choose a suitable wall location, considering speaker placement for optimal sound and power outlet accessibility. Ensure there are no hidden electrical wires or plumbing in the wall at the drilling location.
  2. Duvar Plakasını Takın: Secure the wall plate to the desired location using the provided hardware. For wood studs, drill pilot holes and use wood screws. For drywall, use appropriate anchors and screws. Ensure the plate is level before tightening.
  3. Assemble Speaker Bracket: Attach the speaker bracket to the wall plate. Refer to the diagram below for visual guidance on how the bracket connects to the wall mount.
  4. Connect Speaker: Carefully align your Sonos Era 100 speaker with the bracket. The bottom threaded insert on the speaker will secure it to the mount. Ensure the speaker is firmly attached.
  5. Kablo yönetimi: Route the speaker's power cable through the integrated cable management channels on the mount for a clean and organized appearance.
Diagram showing the speaker mounting bracket components.
Figure 4.1: Speaker mounting bracket components.
Image showing a Sonos Era 100 speaker attached to the wall mount.
Figure 4.2: Sonos Era 100 speaker attached to the wall mount.
Image demonstrating cable management with the speaker mount.
Figure 4.3: Integrated cable management for a tidy setup.

5. Kullanım Talimatları (Ayarlamalar)

The Sanus Speaker Wall Mount allows for flexible positioning of your Sonos Era 100 speakers to optimize your audio experience.

  • Eğim Ayarı: The speaker can be tilted 7 degrees upwards or 32 degrees downwards. Gently push or pull the speaker to achieve the desired vertical angle.
  • Döndürme Ayarı: The speaker can be swiveled 72 degrees to the left or right. Rotate the speaker horizontally to direct sound as needed.

All adjustments are tool-free, allowing for easy fine-tuning of your speaker's direction.

Diagram illustrating the tilt and swivel range of the speaker mount.
Figure 5.1: Tilt (7° up, 32° down) and Swivel (73° left/right) adjustment ranges.
Image showing a hand adjusting the tilt of a mounted speaker.
Figure 5.2: Effortless tilt adjustment for optimal sound.

6. Bakım

To maintain the appearance and functionality of your speaker mounts:

  • Montaj parçasını yumuşak, kuru bir bezle temizleyin. Aşındırıcı temizleyicilerden veya çözücülerden kaçının.
  • Montaj vidalarının ve bağlantılarının sıkı ve güvenli kaldığından emin olmak için periyodik olarak kontrol edin.

7. Sorun Giderme

If you encounter any issues with your speaker mounts, consider the following:

  • Montaj gevşek gibi görünüyor: Re-check and tighten all mounting screws on the wall plate and the speaker bracket. Ensure the wall material is appropriate for the chosen hardware.
  • Uyum sağlamada zorluk: Ensure no cables are obstructing the movement of the mount. Apply gentle, even pressure when adjusting tilt or swivel.
  • Speaker not level: Verify that the wall plate was installed level. Minor adjustments can often be made by slightly loosening and re-tightening the bracket screws.

8. Özellikler

ÖzellikDetay
Ürün Boyutları7.36 x 3.94 x 6.29 inç (18.7 x 10 x 16 cm)
Ürün Ağırlığı2.68 pound (1.22 kg)
Model NumarasıWSWME12
Uyumlu CihazlarSonos Era 100 Speakers
Montaj TipiDuvara Montaj
RenkSiyah
Eğim Aralığı7° Yukarı / 32° Aşağı
Dönme Aralığı72° Left / 72° Right
Diagram showing the dimensions of the speaker mount.
Figure 8.1: Key dimensions of the Sanus WSWME12 mount.

9. Garanti ve Destek

Sanus products are designed and engineered in the U.S. with over 30 years of experience in audio-visual mounting solutions. This product comes with a limited warranty. For any questions, installation assistance, or troubleshooting, Sanus offers U.S.-based expert customer care available 7 days a week.

For support, please visit the official Sanus websiteye gidin veya doğrudan müşteri hizmetleriyle iletişime geçin.

İlgili Belgeler - WSWME12

Önview Sonos Era 100/300 için SANUS BSSEA2 Yüksekliği Ayarlanabilir Hoparlör Standı - Kurulum Kılavuzu
Sonos Era 100 ve Era 300 hoparlörler için tasarlanmış SANUS BSSEA2 yüksekliği ayarlanabilir hoparlör standının resmi kullanım kılavuzu. Güvenlik talimatları, parça listesi, boyutlar ve adım adım montaj kılavuzu içerir.
Önview SANUS WSSE1A1/WSSE1A2 Height-Adjustable Speaker Stand for Sonos Era 100 - Instruction Manual
This document provides detailed instructions for assembling and using the SANUS WSSE1A1 and WSSE1A2 height-adjustable speaker stands, designed specifically for Sonos Era 100 speakers. It includes essential safety warnings, product dimensions, a list of parts and hardware, step-by-step assembly guidance, and instructions for height adjustment and cable management.
Önview Sonos Era 300™ için SANUS WSSE3A1/WSSE3A2 Yüksekliği Ayarlanabilir Hoparlör Standı - Kullanım Kılavuzu
Sonos Era 300™ hoparlörler için tasarlanmış SANUS WSSE3A1/WSSE3A2 yüksekliği ayarlanabilir hoparlör standının montajı ve kullanımı için ayrıntılı talimatlar. Güvenlik bilgileri, parça listesi ve adım adım montaj kılavuzu içerir.
Önview SANUS WSS21/WSS22 Hoparlör Sehpası Kullanım Kılavuzu
Sonos One, PLAY:1 ve PLAY:3 hoparlörler için tasarlanmış SANUS WSS21 ve WSS22 hoparlör standlarının resmi kullanım kılavuzu. Montaj adımları, güvenlik bilgileri ve boyutları içerir.
Önview SANUS WSFME11/WSFME12 Sonos Era 100™ için Sabit Hoparlör Duvar Montaj Aparatı - Kullanım Kılavuzu
Bu kullanım kılavuzu, Sonos Era 100™ hoparlörler için SANUS WSFME11 ve WSFME12 sabit hoparlör duvar montaj aparatlarının kurulumu için ayrıntılı adımlar sunmaktadır. Önemli güvenlik bilgileri, birlikte verilen parçaların ve donanımın listesi, gerekli aletler ve alçıpan, ahşap dikme ve beton duvar tipleri için adım adım kurulum kılavuzlarının yanı sıra sökme talimatları ve ürün boyutlarını içermektedir.
Önview SANUS WSSE3A1/WSSE3A2 Height-Adjustable Speaker Stand for Sonos Era 300 - Instruction Manual
Official instruction manual for the SANUS WSSE3A1/WSSE3A2 height-adjustable speaker stand designed for the Sonos Era 300 speaker. Includes safety information, parts list, dimensions, and step-by-step assembly instructions.