giriiş
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your HYCHIKA Mini Portable Air Compressor. Please read this manual thoroughly before using the device and retain it for future reference.
Güvenlik Talimatları
- İlk kullanımdan önce cihazın tam şarj olduğundan emin olun.
- Kompresörü ıslak ortamlarda veya yanıcı sıvı/gazların yakınında çalıştırmayın.
- Çocukların erişemeyeceği yerde saklayınız.
- Do not over-inflate. Always check the recommended pressure for the item being inflated.
- Aşırı ısınmayı önlemek için uzun süreli sürekli çalıştırmadan kaçının. Cihaz ısınırsa soğumasını bekleyin.
- Yalnızca birlikte verilen aksesuarları ve şarj kablolarını kullanın.
- Cihazda arıza meydana gelirse, kullanımı derhal durdurun ve müşteri desteğiyle iletişime geçin.
Paket İçeriği
Paketinizde tüm öğelerin mevcut olduğundan emin olun:
- HYCHIKA Mini Portable Air Compressor
- Şişirilebilir Hortum
- 4 Extra Nozzles (for various applications like bikes, balls, life buoys)
- USB Type-C Şarj Kablosu
- 12V DC Car Cigarette Lighter Power Plug
- Kullanım Kılavuzu (bu belge)

Figure 1: Package Contents - Main compressor unit, inflatable hose, various nozzles, USB-C charging cable, and 12V car power adapter.
Ürün Bittiview

Figure 2: Product Components - Front panel with LCD display and control buttons, LED light, and air hose connection port.
- LCD Ekran: Mevcut basıncı, hedef basıncı, pil seviyesini ve seçilen modu gösterir.
- Kontrol Düğmeleri:
- Güç Düğmesi: Cihazı açar/kapatır.
- Mode/Unit Button: Cycles through inflation modes (Car, Motorcycle, Bike, Ball, Manual) and pressure units (PSI, BAR, KPA, KG/CM²).
- '+' Düğmesi: Hedef basıncını artırır.
- '-' Düğme: Hedef basıncını düşürür.
- LED/SOS Button: Activates the LED light and SOS flashing mode.
- Air Hose Interface: Connection point for the inflatable hose.
- LED Işıklar: Provides illumination for use in dark conditions.
- USB-C Şarj Portu: For charging the compressor.
- USB-A Çıkış Bağlantı Noktası: For using the device as a power bank.
Kompresörü Şarj Etme
Before first use, fully charge the compressor. The device can be charged using the provided USB Type-C cable or the 12V DC car cigarette lighter power plug.
- Connect the USB Type-C cable to the compressor's charging port and to a suitable USB power adapter (not included) or the 12V car charger to your vehicle's cigarette lighter socket.
- The battery indicator on the LCD screen will show the charging status.
- Charging is complete when the battery indicator shows a full charge.
Kurulum ve İşletim
1. Connecting the Air Hose and Nozzle
- Screw the inflatable hose clockwise into the air hose interface on the top of the compressor. Ensure it is securely tightened.
- Şişirmek istediğiniz ürün için uygun başlığı seçin.

Figure 3: Valve Compatibility - The compressor supports various valve types for cars, bikes, balls, and life buoys using the included adapters.
- Attach the selected nozzle to the end of the inflatable hose.
2. Cihazı Çalıştırma ve Basıncı Ayarlama
- Press and hold the Power Button to turn on the compressor. The LCD screen will illuminate.
- Connect the nozzle to the valve of the item you intend to inflate. The LCD display will show the current pressure.
- Press the Mode/Unit Button to cycle through the preset inflation modes (Car, Motorcycle, Bike, Ball) or select Manual Mode.

Figure 4: Inflation Modes - The compressor offers preset modes for various items and a manual mode for custom pressure settings.
- Use the '+' and '-' buttons to adjust the target pressure. The device supports a maximum pressure of 150 PSI (10.3 Bar).
- To change pressure units (PSI, BAR, KPA, KG/CM²), press and hold the Mode/Unit Button.
3. Enflasyonun Başlaması ve Durdurulması
- Once the target pressure is set, press the Power Button to start inflation.
- The compressor will automatically stop when the target pressure is reached.
- To manually stop inflation at any time, press the Power Button again.
- After inflation, quickly disconnect the hose from the valve to minimize air loss.

Figure 5: Inflation Process - Step-by-step guide from connecting the hose to automatic shut-off.
Ek Fonksiyonlar
LED Light and SOS Function
The compressor is equipped with an LED light for illumination in low-light conditions and an SOS flashing mode for emergencies.
- Press the LED/SOS Button once to turn on the LED light.
- Press the LED/SOS Button again to activate the SOS flashing mode.
- Press the LED/SOS Button a third time to turn off the light.

Figure 6: LED and SOS Function - The integrated LED light provides illumination and an SOS signal for emergencies.
Power Bank Fonksiyonu
The built-in 6000mAh battery allows the compressor to function as a portable power bank for charging mobile devices.
- Connect your mobile device's charging cable to the USB-A output port on the compressor.
- Kompresör cihazınızı şarj etmeye başlayacaktır.
- Disconnect your device when charging is complete.

Figure 7: Power Bank Feature - The compressor can charge mobile phones using its 6000mAh battery.
Bakım
- Temizlik: Wipe the exterior of the compressor with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Depolamak: Store the compressor in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage to preserve battery life.
- Pil Bakım: To maintain battery health, charge the device at least once every three months, even if not in use.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Kompresör çalışmıyor. | Pil zayıf veya şarj yok. | Charge the compressor fully using the provided cable. |
| Compressor inflates slowly or not at all. | Hose not securely connected; incorrect nozzle; valve leakage; item too large. | Ensure hose and nozzle are tightly connected. Verify correct nozzle for valve type. Check for leaks. For very large items, inflation time will be longer. |
| Yanlış basınç ölçümü. | Hose not properly connected to valve. | Meme ile ürünün vanası arasında sıkı bir sızdırmazlık sağlayın. |
| Kompresör aşırı ısınıyor ve kapanıyor. | Uzun süreli kesintisiz çalışma. | Allow the compressor to cool down for at least 10-15 minutes before resuming use. Avoid continuous operation for more than 10 minutes. |
Özellikler
| Model Numarası | MS22C-002 |
| Marka | HİÇİKA |
| Giriş Voltage | 12V doğru akım |
| Pil Kapasitesi | 6000 mAh Lityum İyon |
| Maksimum Basınç | 150 PSI (10.3 Bar) |
| Working Accuracy | ±1.5 PSI |
| Basınç Birimleri | PSI, BAR, KPA, KG/CM² |
| Boyutlar | 21.2 x 9.7 x 9.6 cm (yaklaşık) |
| Ağırlık | 840 gram (yaklaşık) |
| Güç Kaynağı | Battery Powered / 12V DC Car Charger |
Garanti ve Destek
HYCHIKA products are designed and manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official HYCHIKA webalan.
For further assistance, please contact HYCHIKA customer support.