Godox MS200V Studio Strobe Flash Light Instruction Manual

giriiş

The Godox MS200V is a compact and versatile studio strobe flash light designed for professional photography. This manual provides detailed instructions for the safe and effective use of your MS200V unit, covering setup, operation, maintenance, and troubleshooting.

Image: The Godox MS200V Studio Strobe Flash Light, highlighting its compact design and integrated features.

Temel Özellikler

• Dahili Godox 2.4G Kablosuz X Sistemi: Enables remote control with Godox X1T, XT16, XPro, XProII, X2T, or X3 flash triggers (sold separately). Supports 16 groups (0-9, A-F) and 32 channels for flexible control.
• Upgraded 10W LED Modeling Lamp: Adjustable from 5% to 100% power level for precise lighting preview.
• Precise Power Output: Power output can be set from 1/32 to 1/1 in 50 steps.
• Flaş Önleme Fonksiyonu: Guarantees synchronization with cameras capable of firing a preflash.
• Kararlı Çıkış: Maintains power output stability with no more than 2% tolerance during extended use.
• Kompakt ve Taşınabilir: Weighs approximately 1.3kg with a length of 28.3cm (with lamp cover), making it suitable for various photography applications.
• Bowens Dağı: Compatible with a wide range of Bowens mount accessories for diverse lighting effects.
• Otomatik Hafıza: Remembers the last used parameters after 3 seconds of setting completion, restoring them upon restart.

Kutuda Neler Var?

Lütfen paketinizin içeriğini kontrol ederek tüm öğelerin mevcut olduğundan emin olun:

• 1x Light Body (Godox MS200V)
• 1x Reflektör
• 1x Güç Kablosu

Image: The Godox MS200V unit, standard reflector, and power cable as included in the package.

Kurmak

1. Mounting the Strobe

1. Attach the MS200V light body to a compatible light stand.
2. Secure the strobe by tightening the mounting knob on the light stand.
3. Adjust the tilt angle of the strobe using the handle and locking mechanism on the unit.

Image: The Godox MS200V strobe light securely mounted on a light stand, ready for use.

2. Attaching Accessories (Bowens Mount)

1. Align the accessory (e.g., reflector, softbox) with the Bowens mount on the front of the strobe.
2. Insert the accessory and rotate it clockwise until it locks into place.
3. Çıkarmak için, Bowens bağlantı noktasındaki serbest bırakma düğmesine basın ve aksesuarı saat yönünün tersine çevirin.

Image: The Bowens mount on the MS200V, demonstrating compatibility with various light modifiers such as reflectors, softboxes, and snoots.

3. Güç Bağlantısı

1. Ensure the strobe's power switch is in the OFF position.
2. Connect the provided power cable to the power input port on the back of the MS200V.
3. Plug the other end of the power cable into a suitable AC 110-120V/60Hz power outlet.

Kullanım Talimatları

1. Açma/Kapama

Flip the power switch located on the back panel of the strobe to the 'ON' position to power on the unit. Flip it to 'OFF' to power down.

2. Adjusting Flash Power Output

1. The flash power output can be adjusted from 1/32 to 1/1 in 50 steps.
2. Rotate the 'SET' dial on the control panel to increase or decrease the flash power. The current power level will be displayed on the LCD screen.

Image: A close-up of the MS200V's control panel, showing the LCD display and adjustment dial for flash power.

3. Modelleme Lamp Kontrol

1. Modelleme l'ye basınamp button (light bulb icon) on the control panel to turn the 10W LED modeling lamp açık veya kapalı.
2. To adjust the brightness, rotate the 'SET' dial while the modeling lamp is active. Brightness can be adjusted from 5% to 100%.

Image: Detail of the 10W COB LED modeling lamp, illustrating its adjustable brightness from 5% to 100%.

4. Godox 2.4G Wireless X System

The MS200V features a built-in 2.4G wireless X system for remote triggering and control. To use this feature:

1. Ensure your Godox flash trigger (e.g., X1T, XPro, X2T) is set to the same group and channel as the MS200V.
2. Use the 'GR/CH' buttons on the MS200V control panel to adjust the group and channel settings.
3. The flash can now be triggered and controlled remotely via the transmitter.

Image: The Godox MS200V demonstrating its compatibility with the Godox 2.4G Wireless X System, showing various trigger models.

5. Senkronizasyon

The MS200V supports various synchronization methods:

• Senkronizasyon Kablosu: Connect a 3.5mm sync cord from your camera to the 'SYNC' port on the MS200V.
• Optical Slave Modes (S1/S2): Press the 'S1/S2' button to activate optical slave mode. S1 mode fires the flash in response to a single flash. S2 mode ignores the camera's preflash and fires on the main flash.
• Kablosuz X Sistemi: As described above, use a compatible Godox trigger for wireless synchronization.

6. Auto Memory Function

The MS200V automatically saves your current settings (flash power, modeling lamp brightness, group/channel) after 3 seconds of inactivity. These settings will be restored when the unit is powered on again.

Bakım

• Temizlik: Regularly clean the exterior of the strobe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Depolamak: Store the unit in a cool, dry place away from direct sunlight and moisture when not in use.
• Sigorta Değişimi: The unit uses a replaceable fuse. If the unit fails to power on, check and replace the fuse if necessary. Refer to the specifications for the correct fuse type.
• Modelleme Lamp: LED modelleme lamp is designed for long life. If replacement is needed, contact authorized service personnel.

Sorun giderme

Özellikler

Güvenlik Bilgileri

• Do not operate the unit with wet hands or in wet conditions.
• Flaş ışığına doğrudan göz temasından kaçının, çünkü geçici görme bozukluğuna neden olabilir.
• Uzun süreli kullanımda aşırı ısınmayı önlemek için yeterli havalandırma sağlanmalıdır.
• Cihazı kendiniz sökmeye veya onarmaya çalışmayın. Yetkili servis personeline başvurun.
• Çocukların erişemeyeceği yerde saklayınız.

Ürün Videoları

Garanti ve Destek

For warranty information, technical support, or service inquiries, please refer to the official GODOX website or contact your authorized GODOX dealer. Keep your purchase receipt as proof of purchase for warranty claims.