Oraimo OSV-102 Cordless Vacuum Cleaner Replacement HEPA Filter User Manual

Ürün Bittiview

This manual provides instructions for the Oraimo replacement HEPA filters, model OAS-FI-SV102, designed for use with the Oraimo OSV-102 Cordless Vacuum Cleaner. These filters are crucial for maintaining the vacuum's suction power and ensuring effective air filtration, capturing fine dust and allergens. The filters are reusable and washable, offering a cost-effective and environmentally friendly solution.

Image: The Oraimo OSV-102 Cordless Vacuum Cleaner shown with its various attachments and a set of four replacement HEPA filters, highlighting the product's components.

The package includes two (2) replacement HEPA filters, ensuring you have a spare for continuous use while one is being cleaned or dried. Regular replacement and cleaning of these filters are essential for optimal vacuum performance and air quality.

Önemli Güvenlik Bilgileri

• Always turn off and unplug the Oraimo OSV-102 vacuum cleaner before attempting to install, remove, or clean the filters.
• Use only genuine Oraimo replacement filters (model OAS-FI-SV102) to ensure proper fit and filtration performance.
• Do not operate the vacuum cleaner without the filters properly installed.
• Keep filters away from open flames or excessive heat.

Kurulum Talimatları

Follow these steps to replace the HEPA filter in your Oraimo OSV-102 Cordless Vacuum Cleaner:

1. Kapat: Ensure the vacuum cleaner is turned off and disconnected from its charging base or power source.
2. Locate Dust Cup: Identify the dust cup assembly on your Oraimo OSV-102 vacuum.
3. Toz haznesini çıkarın: Press the dust cup release button (if applicable) or twist the dust cup counter-clockwise to detach it from the main body of the vacuum.
4. Erişim Filtresi: Inside the dust cup, locate the existing HEPA filter. It is typically a cylindrical or conical filter element.
5. Eski Filtreyi Kaldır: Gently twist or pull the old filter to remove it from its housing. Dispose of the old filter responsibly if it is no longer usable.
6. Yeni Filtre Ekle: Take a new Oraimo replacement HEPA filter (OAS-FI-SV102) and insert it into the filter housing. Ensure it is seated firmly and correctly.
7. Toz haznesini tekrar takın: Align the dust cup with the vacuum's main body and twist it clockwise or push it until it clicks securely into place.
8. Kullanıma hazır: The vacuum cleaner is now ready for use with the new filter installed.

Bakım ve Temizlik

To maintain optimal performance, regularly clean your reusable HEPA filters. Follow these steps:

1. Filtreyi Kaldır: Follow steps 1-4 from the Installation Instructions to remove the HEPA filter from the dust cup.
2. Tap Out Debris: Gently tap the filter against a trash can to dislodge any loose dust and debris.
3. Durulama: Rinse the filter under cold, running water. Continue rinsing until the water runs clear. Do not use hot water or detergents, as this can damage the filter material.
4. Hava ile kurutma: Allow the filter to air dry completely for at least 24 hours before reinstalling it. Ensure it is placed in a well-ventilated area, away from direct sunlight or heat. Do not use a dryer or other heating devices, as this can deform or damage the filter.
5. yeniden yükleyin: Once completely dry, reinstall the filter into the dust cup and reattach the dust cup to the vacuum cleaner.

It is recommended to clean the filter every 2-4 weeks, depending on usage, and replace it every 3-6 months for best performance.

Sorun giderme

If you experience issues with your Oraimo OSV-102 vacuum cleaner after filter maintenance, consider the following:

• Azaltılmış Emme:
  • Check if the filter is clogged. Clean or replace the filter as per the Maintenance section.
  • Filtreyi yeniden takmadan önce tamamen kuru olduğundan emin olun.amp filter can impede airflow.
  • Verify the dust cup is securely attached and there are no blockages in the vacuum's hose or brush head.
• Alışılmadık Koku:
  • A dirty filter can cause odors. Clean or replace the filter.
  • Ensure the filter is thoroughly dried after washing to prevent mildew.
• Filtre uymuyor:
  • Confirm you are using the correct replacement filter model (OAS-FI-SV102) for your Oraimo OSV-102 vacuum cleaner.
  • Ensure the filter is oriented correctly during installation.

Özellikler

Garanti ve Destek

For any questions regarding the Oraimo replacement HEPA filters, including warranty information or technical support, please contact Oraimo customer service. Refer to the original Oraimo OSV-102 Cordless Vacuum Cleaner manual or the Oraimo official webiletişim bilgileri için site.