giriiş
This manual provides essential information for the safe and efficient operation, installation, and maintenance of the GoodWe 3648-EM Hybrid Inverter. Please read this manual thoroughly before installation and operation, and keep it for future reference.
The GoodWe 3648-EM is a high-performance hybrid inverter designed for residential and light commercial solar energy systems, integrating solar power generation, battery storage, and grid connection capabilities.
Ürün Bittiview
The GoodWe 3648-EM Hybrid Inverter system includes the main inverter unit and a three-phase Smart Meter for comprehensive energy management.
Figure 1: GoodWe 3648-EM Hybrid Inverter (top) and accompanying Smart Meter (bottom left).
This image displays the primary components of the GoodWe 3648-EM system. The larger unit is the hybrid inverter, characterized by its white casing and black control panel with indicator lights. Below and to the left is the compact Smart Meter, designed for DIN rail mounting, also in a white casing with a small display and indicator lights.
Şekil 2: Ön view of the GoodWe 3648-EM Hybrid Inverter.
This image shows a detailed front view of the GoodWe 3648-EM Hybrid Inverter. The front panel features a series of LED indicators and buttons for status monitoring and basic control. The GoodWe logo is visible on the right side of the control panel.
Şekil 3: Yakın çekim view of the GoodWe Smart Meter.
This image provides a close-up of the GoodWe Smart Meter, a compact device with a small digital display and several indicator lights (power, communication, status). It is designed for integration into electrical panels to monitor energy flow.
Teknik Özellikler
| Özellik | Şartname |
|---|---|
| Örnek | GW3648-EM |
| Anma Gücü | 3.68 kVA |
| Backup Power (Single-phase) | 5.0 kW |
| MPP İzleyiciler | 2 |
| MPPT Cilttage Aralık | 280-500 V DC |
| Maks. Alan sayısı Şarj Akımı | 50A DC |
| İletişim | Wi-Fi, Integrated Web Sunucu |
| Akıllı Sayaç | Three-phase included |
| Boyutlar (G x Y x D) | 347x432x175 mm |
| Koruma Sınıfı | IP65 |
| Ağırlık | 17 kilo |
Güvenlik Talimatları
Always adhere to local electrical codes and regulations. Installation and maintenance should only be performed by qualified personnel.
- Ensure the inverter is disconnected from all power sources (PV, battery, grid) before performing any work.
- İnvertörü açmayınasing unless explicitly instructed by GoodWe technical support.
- Canlı elektrikli parçalara dokunmaktan kaçının.
- İnverterin uygun şekilde topraklandığından emin olun.
- Çocukları ve yetkisiz personeli kurulum alanından uzak tutun.
Kurulum ve Kurulum
1. Ambalajın Açılması ve Muayene
Carefully unpack the inverter and Smart Meter. Inspect all components for any signs of damage during transit. Report any damage to your supplier immediately.
2. İnverterin Montajı
Choose a suitable mounting location that is:
- Well-ventilated and protected from direct sunlight.
- Yanıcı maddelerden uzak tutun.
- Bakım için erişilebilir.
- Capable of supporting the inverter's weight (17 kg).
Use the provided mounting bracket and hardware to securely fasten the inverter to a solid wall or frame.
3. Elektrik Bağlantıları
All electrical connections must comply with local wiring regulations and standards. Refer to the connection diagram below for guidance.
Şekil 4: Arka view of the GoodWe 3648-EM Hybrid Inverter showing connection ports.
This image displays the rear panel of the GoodWe 3648-EM Hybrid Inverter, highlighting its various connection terminals. These include inputs for PV strings (PV1, PV2), battery connections, grid connection (ON-GRID), backup load connection (BACK-UP), and communication ports (RS485, Meter). A large heat sink is visible at the bottom.
- PV Bağlantısı: Connect the positive and negative cables from your solar array to the PV1 and PV2 inputs. Ensure correct polarity.
- Pil Bağlantısı: Connect the battery bank to the dedicated battery terminals. Observe correct polarity (+/-).
- Şebeke Bağlantısı: Connect the inverter to the main electrical grid.
- Backup Load Connection: For critical loads, connect them to the backup output.
- Smart Meter Connection: Connect the three-phase Smart Meter as per the wiring diagram provided in the full installation guide.
- Topraklama: İnverter şasisinin doğru şekilde topraklanmış olduğundan emin olun.
4. Communication Setup (Wi-Fi)
The inverter features integrated Wi-Fi for monitoring and configuration. Follow these general steps:
- İnvertörü açın.
- Connect your device (smartphone, laptop) to the inverter's Wi-Fi hotspot (SSID typically starts with "GoodWe_").
- Access the inverter's web interface via a browser (default IP address usually 192.168.1.1).
- Configure network settings to connect the inverter to your home Wi-Fi network.
- Register the inverter on the GoodWe monitoring platform (e.g., SEMS Portal) for remote monitoring.
İnvertörün Çalıştırılması
1. İlk Açılış
After all connections are secure and verified:
- Turn on the DC isolator switch for the PV array.
- Akü şalterini açın.
- Turn on the AC breaker from the grid.
- The inverter will perform a self-test and then begin operation. Observe the LED indicators on the front panel for status.
2. İzleme
Monitor the inverter's performance via the integrated web server or the GoodWe monitoring app/platform. Key parameters to observe include:
- PV enerji üretimi
- Battery charge/discharge status
- Grid interaction (export/import)
- Yük tüketimi
- Sistem durumu ve hata kodları
3. Kapatma Prosedürü
To safely shut down the inverter:
- Turn off the AC breaker from the grid.
- Akü kesiciyi kapatın.
- Turn off the DC isolator switch for the PV array.
- Wait for all indicators on the inverter to turn off.
Bakım
Düzenli bakım, invertörünüzün optimum performans ve uzun ömürlü olmasını sağlar.
- Aylık: Visually inspect the inverter and wiring for any signs of damage, corrosion, or loose connections. Ensure ventilation openings are clear of dust and debris.
- Yıllık: Have a qualified technician perform a thorough inspection, including checking electrical connections, torque settings, and system performance. Clean the inverter's heat sink if necessary.
- Keep the area around the inverter clean and free from obstructions.
Sorun giderme
This section provides basic troubleshooting steps for common issues. For complex problems, contact GoodWe technical support or a certified installer.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| İnverter çalışmıyor. | No DC input from PV or battery; AC grid disconnected; Emergency stop activated. | Check all breakers and isolators (PV, battery, AC grid). Ensure emergency stop button is disengaged. |
| Düşük güç çıkışı | Shading on PV panels; Dirty PV panels; Inverter derating due to high temperature. | Check for shading. Clean PV panels. Ensure adequate ventilation around the inverter. |
| İletişim hatası | Wi-Fi signal weak; Incorrect network settings; Router issue. | Check Wi-Fi signal strength. Reconfigure network settings. Restart router. |
| Görüntülenen hata kodu | Internal fault; Grid fault; PV overvoltage/düşük sestage. | Note the error code and consult the full user manual or contact GoodWe support. Do not attempt repairs yourself. |
Garanti ve Destek
GoodWe products typically come with a standard warranty. Please refer to your purchase documentation or the official GoodWe webBölgenize ve modelinize özel garanti şartları ve koşulları için lütfen siteyi ziyaret edin.
For technical support, warranty claims, or further assistance, please contact your installer or the official GoodWe support channels:
- GoodWe Official Webalan: www.goodwe.com
- SEMS Portal (Monitoring): www.semsportal.com
- Refer to the contact information provided with your product or on the GoodWe webBölgesel destek numaraları için site.
