FLEXISPOT E6 Standing Desk User Manual

1. Giriş

Thank you for choosing the FLEXISPOT E6 Standing Desk. This electric height-adjustable desk is designed to enhance your workspace ergonomics, allowing seamless transitions between sitting and standing positions. This manual provides essential information for safe assembly, operation, and maintenance of your new desk.

Image 1.1: The FLEXISPOT E6 Standing Desk in a typical office setup.

2. Güvenlik Bilgileri

• Ensure the total weight on the desk does not exceed 220 lbs (100 kg).
• Adjust the desk height according to user comfort while maintaining stability.
• Çalışma sırasında çocukları ve evcil hayvanları masadan uzak tutun.
• Do not place hands or objects near moving parts to avoid injury or damage.
• Ensure all cables are properly managed to prevent tripping hazards and damage.
• Only use the provided power adapter and cables.

3. Paket İçeriği

Montaj işlemine başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• Pedestal (x2)
• Right Beam (x2)
• Left Beam (x2)
• Sütun (x2)
• Side Bracket (x2)
• Adaptör Braketi (x1)
• Tuş takımı (x1)
• AC Power Cable (x1)
• Power Adaptor (x1)
• Extension Cord (x1)
• T-Socket Wrench (x1)
• Kablo Klipsi (x4)
• Masaüstü (x1)

4. Montaj Talimatları

Follow these steps to assemble your FLEXISPOT E6 Standing Desk. It is recommended to have two people for assembly.

1. Assemble the Cross Beams: Connect the left and right beams using the provided screws and T-socket wrench. Ensure screws are aligned with square holes and pressed tightly.
2. Attach Pedestals to Columns: Secure the pedestals to the columns using the designated screws. Prioritize diagonal screws during this step for stability.
3. Connect Columns to Cross Beams: Attach the assembled column-pedestal units to the cross beams.
4. Install Side Brackets: Mount the side brackets to the frame using the appropriate screws.
5. Masaüstünü bağlayın: Carefully place the desktop upside down on a soft, clean surface. Position the assembled frame onto the desktop. Ensure the distance between the supporting bracket and the edge of the tabletop does not exceed 200mm. Secure the frame to the desktop using the provided screws.
6. Install Keypad and Adapter Bracket: Attach the keypad to the underside of the desktop, ensuring it is on the same side as the adapter bracket. The curved edge of the keypad should be flush with the edge of the table top. Secure the adapter bracket.
7. Kabloları Bağlayın: Connect the motor cables from the columns to the control box. Connect the keypad cable to the control box. Plug the power adapter into the control box and then into a power outlet. Use cable clips to manage and secure all cables neatly.

Image 4.2: The assembled FLEXISPOT E6 Standing Desk ready for use.

5. Kullanım Talimatları

Your FLEXISPOT E6 Standing Desk features a quiet and smooth dual motor system for effortless height adjustment.

• Yüksekliği Ayarlama: Use the up (▲) and down (▼) arrow buttons on the keypad to raise or lower the desk to your desired height. The current height will be displayed on the LED panel.
• 3-Stage Lift System: The desk offers a wide range of lifting space, from 23.6 inches to 48.8 inches, accommodating various user heights.
• Sessiz Çalışma: The dual motors operate at less than 50 dB, ensuring minimal noise disruption.

Image 5.1: The intelligent keypad for height adjustment and memory settings.

6. Programlanabilir Kontrolör

The intelligent keypad allows you to save and recall your preferred desk heights:

1. Bellek Pozisyonu Ayarla: Adjust the desk to your desired height using the up/down arrows. Press the 'M' button, then press one of the numbered memory buttons (1, 2, 3, or 4) within 3 seconds to save the current height.
2. Bir Hafıza Pozisyonunu Hatırlama: Masayı kaydedilen yüksekliğe otomatik olarak getirmek için ilgili numaralı hafıza düğmesine (1, 2, 3 veya 4) basmanız yeterlidir.
3. Çarpışma Önleme Sistemi: The desk is equipped with an anti-collision system to detect and prevent collisions during height adjustment, improving safety.

7. Özellikler

Image 7.1: Detailed dimensions and height ranges of the FLEXISPOT E6 desk.

Image 7.2: The desk demonstrating its 220 lbs maximum load capacity.

8. Bakım

• Temizlik: Masaüstünü ve çerçeveyi yumuşak bir bezle silin.amp Bez. Sert kimyasallardan veya aşındırıcı temizleyicilerden kaçının.
• Kablo yönetimi: Regularly check and reorganize cables to prevent tangles and damage.
• Denetleme: Tüm vidaların ve bağlantıların sıkı ve güvenli olduğundan emin olmak için periyodik olarak kontrol edin.

9. Sorun Giderme

If you encounter any issues with your FLEXISPOT E6 Standing Desk, please refer to the following common solutions:

• Masa Hareket Etmiyor: Check all cable connections, especially the power adapter and motor cables. Ensure the power outlet is functional.
• Eşitsiz Yükseklik: Perform a reset by holding down the 'M' button for 5-10 seconds until the desk moves to its lowest position and then slightly rises.
• Hata Kodları: Refer to the specific error code displayed on the keypad and consult the FLEXISPOT support webyardım için site veya müşteri hizmetleri ile iletişime geçin.

10. Garanti ve Destek

FLEXISPOT stands behind the quality of its products:

• Garanti: Enjoy peace of mind with our 5-year coverage on the desk frame and motor, and 2-year protection on the control panel and electronics.
• İade: Bu ürün 31 Ocak 2026 tarihine kadar iade edilebilir.
• Müşteri Desteği: For any assistance, please contact FLEXISPOT customer support. Visit the official FLEXISPOT Mağazası Daha fazla bilgi ve iletişim seçenekleri için.