Atlanta Digital LED Alarm Clock 2604/0 User Manual

giriiş

Thank you for choosing the Atlanta Digital LED Alarm Clock, Model 2604/0. This alarm clock features a large, continuously illuminated white LED display, adjustable brightness, two separate alarms with crescendo function, and a convenient USB charging port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.

Kurmak

1. Güç Bağlantısı

Connect the provided power adapter to the DC5V port on the back of the alarm clock. Plug the adapter into a standard 230V electrical outlet. The clock requires a permanent power connection for full functionality.

Image: The Atlanta Digital Alarm Clock shown with its included power adapter and USB connection cable.

2. Pil Yedekleme

The alarm clock includes an integrated CR2032 button cell battery (1 CR2032 - included). This battery serves as a backup to protect programmed data (time and alarm settings) in case of a power outage. It does not power the display or alarm functions independently.

Resim: Arka view of the alarm clock, highlighting the battery compartment, DC5V input, USB port, and control buttons/sliders.

Kullanım Talimatları

1. Saati Ayarlama

1. Basılı tutun SAAT AYARI button (located on the right side of the back panel) for 2 seconds until the display flashes.
2. Kullanın 12/24 SAAT button (left side of the back panel) to adjust the hours.
3. Basın SAAT AYARI button again to switch to minute adjustment. Use the 12/24 SAAT Dakikayı ayarlamak için
4. Basın SAAT AYARI Zaman ayarı modundan çıkmak ve onaylamak için düğmeye bir kez daha basın.

To switch between 12-hour and 24-hour display formats, briefly press the 12/24 SAAT button when not in time setting mode.

Image: Front display of the alarm clock showing the time "12:50 PM".

2. Alarmı Ayarlama

The clock supports two separate alarms.

1. Basılı tutun ALARM KURULDU button (located on the right side of the back panel, below TIME SET) for 2 seconds until the alarm time flashes.
2. Kullanın 12/24 SAAT Alarm saatlerini ayarlamak için düğme.
3. Basın ALARM KURULDU button again to switch to minute adjustment. Use the 12/24 SAAT Alarm dakikalarını ayarlamak için düğmeye basın.
4. Basın ALARM KURULDU Alarm ayar modundan çıkmak ve onaylamak için düğmeye bir kez daha basın.
5. To activate or deactivate an alarm, briefly press the AL. AÇIK/KAPALI button (left side of the back panel, below 12/24HR). An indicator on the display will show if the alarm is active.

Alarmda şu özellikler bulunur: Yükseliş function, meaning the alarm sound starts softly and gradually increases in intensity.

3. Erteleme Fonksiyonu

Alarm çaldığında, büyük düğmeye basın. UYUKLAMA button on the top of the clock. This will temporarily silence the alarm for 5 minutes. The alarm will resume after 5 minutes.

4. Ekran Parlaklığı Ayarı

Ekran parlaklığını aşağıdaki ayarları kullanarak ayarlayın. DİMMER slider located on the back panel. Slide it from "LOW" to "HIGH" to achieve your desired brightness level. The brightness is continuously adjustable.

5. Alarm Volume Adjustment

Adjust the alarm sound volume using the HACİM slider located on the back panel. Slide it from "LOW" to "HIGH" to set the desired alarm volume. The volume is continuously adjustable.

6. USB Şarj Bağlantı Noktası

A USB port is located on the back of the alarm clock. You can use this port to charge other devices, such as a mobile phone. Connect your device's USB charging cable to this port.

Bakım

• To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Cihazı sudan ve yüksek nemden uzak tutun.
• Avoid exposing the clock to direct sunlight or extreme temperatures.
• If the backup battery needs replacement, ensure to use a CR2032 type battery.

Sorun giderme

Display is too bright or too dim:

Ayarla DİMMER slider on the back panel. While the brightness is continuously adjustable, some users may find the minimum brightness still too high for a dark bedroom.

Clock loses time or settings during a power outage:

Ensure the CR2032 backup battery is correctly installed and functional. The backup battery preserves settings but does not power the display or alarm during an outage. If the battery is old or depleted, replace it.

Alarm çalmıyor:

• Check if the alarm is activated using the AL. AÇIK/KAPALI button. An indicator should be visible on the display.
• Sağlamak HACİM slider is not set to "LOW" or minimum.
• Alarm saatinin doğru ayarlandığını doğrulayın.

USB charging port not working:

Ensure the alarm clock is properly connected to a power source. The USB port requires the clock to be powered. Check the charging cable of your device.

Özellikler

Garanti ve Destek

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer.